DLA DSCC-DWG-84084 REV J-2009 FILTERS AND CAPACITORS RADIO FREQUENCY ELECTROMAGNETIC INTERFERENCE SUPPRESSION HERMETICALLY SEALED.pdf

《DLA DSCC-DWG-84084 REV J-2009 FILTERS AND CAPACITORS RADIO FREQUENCY ELECTROMAGNETIC INTERFERENCE SUPPRESSION HERMETICALLY SEALED.pdf》由会员分享，可在线阅读，更多相关《DLA DSCC-DWG-84084 REV J-2009 FILTERS AND CAPACITORS RADIO FREQUENCY ELECTROMAGNETIC INTERFERENCE SUPPRESSION HERMETICALLY SEALED.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、 REVISIONS LTR DESCRIPTION DATE APPROVED A Para 3.4.6, changed insulation resistance requirements. TABLE I, changed insertion loss requirements for -010, -011, and -013. Para 6.4, changed vendor style numbers 85-01-09 Ivan R. Jones B Para 3.7, changed manufacturer eligibility requirement. Dimensiona

2、l changes. TABLE I, changed insertion loss limits on several dash numbers. Changed dc resistance and voltage drops on -017 through -019. Added another suggested source of supply. Editorial changes throughout. 87-08-25 David E. Moore C Figure 1, changed tolerance on terminal slot major dimension. Add

3、ed cataloging information. 88-12-05 David E. Moore D Added another suggested source of supply. 90-06-04 David E. Moore E Added a suggested source of supply. Editorial changes throughout. 91-11-14 David E. Moore F Page 2 - Changed PIN to include case finish - Para 3.1.3, added case finish options; pr

4、ohibited pure tin as a case finish. Pages 4 and 6 - Added three new part numbers. Page 7 - Added para to explain prohibition of pure tin; added supersession table. Page 8 - Removed source of supply. 94-11-1 B. Boulter G Changes in accordance with NOR 59GP-R001-9B 98-03-24 David E. Moore H Editorial

5、changes throughout. Page 2 - Added paragraph 2.1. - Paragraph 3.1.3; removed reference to MIL- T-10727. Added text to include prohibition of pure tin on the hardware and as an undercoat. 28 OCT 2003 Kendall A. Cottongim J Changed drawing type to Source Control. Added new pure tin prohibition paragra

6、ph; 3.1.3 Corrected the terminal flag position. Editorial changes. 19 AUG 2009 Michael A. Radecki Prepared in accordance with ASME Y14.100 Source Control drawing REV STATUS OF PAGES REV J J J J J J J J J PAGES 1 2 3 4 5 6 7 8 9 PMIC N/A PREPARED BY Randy Larson DESIGN ACTIVITY DEFENSE ELECTRONICS SU

7、PPLY CENTER DAYTON, OH 45444-5000 Original date of drawing CHECKED BY Randy Larson TITLE FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, HERMETICALLY SEALED 11 July 1984 APPROVED BY Ivan R. Jones SIZE A CODE IDENT. NO. 14933 DWG NO. 84084 REV J PAGE 1 OF 9 AMSC N/A

8、59GP-E060 CURRENT DESIGN ACTIVITY CAGE CODE 037Z3 DEFENSE LOGISTICS AGENCY DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT NO. 1

9、4933 DWG NO. 84084 REV J PAGE 2 1. SCOPE 1.1 Scope. This drawing and MIL-PRF-28861 describe the complete requirements for radio frequency/electromagnetic interference suppression, hermetically sealed filters and capacitors. 1.2 Part or Identifying Number (PIN). The complete PIN is as follows: 84084-

10、 * * I I I I I I Drawing Dash number Case finish number (see figure 1 and table I) (see 3.1.3) (NOTE: The PIN has been revised with revision F of this drawing to include a case finish option (see 3.1.3). For supersession data, see 6.6). 2. APPLICABLE DOCUMENTS 2.1 General. The documents listed in th

11、is section are specified in sections 3 and 4 of this drawing. This section does not include documents cited in other sections of this drawing or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are caution

12、ed that they must meet all specified requirements of documents cited in sections 3 and 4 of this drawing, whether or not they are listed. 2.2 Government documents. 2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this drawing to th

13、e extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-28861 - Filters and Capacitors, Radio Frequency/Electromagnetic Interference Suppression, General Specification for. DEPAR

14、TMENT OF DEFENSE STANDARDS MIL-STD-220 - Method of Insertion Loss Measurement. MIL-STD-1285 - Marking of Electrical and Electronic Parts. (Copies of these documents are available online at http:/assist.daps.dla.mil/quicksearch or from the Standardization Document Order Desk, 700 Robbins Avenue, Phil

15、adelphia, PA 19111-5094.) 2.3 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this drawing and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws

16、and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Interface and physical dimensions. The interface and physical dimensions shall be as specified in MIL-PRF-28861 and herein. 3.1.1 Terminals. Terminals shall be solderable. 3.1.2 Case dimensions. The case dimensions sh

17、all be in accordance with figure 1. 3.1.3 Pure tin prohibition. The use of pure tin is prohibited internally and externally as specified in MIL-PRF-28861. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO

18、SIZE A CODE IDENT NO. 14933 DWG NO. 84084 REV J PAGE 3 Inches mm Inches mm .005 0.13 .250 6.35 .007 0.17 .290 7.36 .010 0.25 .312 7.92 .015 0.38 .3125 7.937 .020 0.51 .375 9.53 .022 0.56 .430 10.92 .035 0.89 .620 15.75 .062 1.57 .690 17.52 .093 2.36 .700 17.78 .120 3.05 1.060 26.92 .125 3.18 1.205 3

19、0.61 1.400 35.56 FIGURE 1. Case dimensions and circuit configurations. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 84084 REV J PAGE 4 PIN 84084- A max PIN 84084- A

20、 max 001* .700 012* 1.205 002* 1.060 013* 1.205 003* 1.060 014* 1.205 004* 1.060 015* 1.205 005* 1.060 016* 1.205 006* 1.060 017* 1.400 007* 1.060 018* 1.400 008* 1.060 019* 1.400 009* 1.060 020* .700 010* 1.060 021* .700 011* 1.060 022* .700 NOTES: 1. Dimensions are in inches. 2. Metric equivalents

21、 are given for general information only. 3. Circuit diagram is for information only. 4. All filters shall be supplied with mounting hardware (hex nut and lockwasher). Mounting hardware shall be furnished with the same finish as the filter case. 5. Terminal identification (nonsymmetrical filters): Th

22、e case shall be marked at the threaded end of the filter, with the symbol “C” or the symbol “L”, as follows, or the circuit diagram shall be marked on the case. Circuit Symbol L1 C L2L 6. Recommended mounting torque: 60 oz-in 4 oz-in. 7. Imperfect thread or undercut optional .062 inch (1.57 mm) maxi

23、mum. 8. One imperfect thread allowed .035 inch (0.89 mm) maximum. FIGURE 1. Case and hardware dimensions and circuit diagrams - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDEN

24、T NO. 14933 DWG NO. 84084 REV J PAGE 5 3.1.4 Case and hardware finish. T (tin plated or tin-lead plated), S (silver plated), or G (gold plated), in accordance with MIL-PRF-28861. Pure tin finish is prohibited as a final finish and as an undercoat. When used, tin plating shall have a minimum lead con

25、tent of 3 percent (see MIL-PRF-28861). 3.1.5 Weight. The weight shall be as follows: a. 19 grams, maximum for dash number 001, 020, 021, and 022. b. 21 grams, maximum for dash numbers 002 through 011. c. 30 grams, maximum for dash numbers 012 through 019. 3.2 Operating temperature range. The operati

26、ng temperature range shall be -55C to +125C. 3.3 Temperature rise. The temperature rise shall be +25C maximum. 3.4 Electrical characteristics. 3.4.1 Rated voltage. The rated voltage shall be 400 volts dc and 230 volts ac rms. 3.4.2 Rated current. The rated current shall be in accordance with table I

27、. 3.4.3 Rated frequency. The rated frequency shall be dc to 400 Hz. 3.4.4 Capacitance. See table I. 3.4.5 Voltage and temperature limits of capacitance. +15, -40 percent. 3.4.6 Insulation resistance. a. At +25C: 1,000 megohms minimum. b. At +125C: 100 megohms minimum. 3.4.7 Insertion loss. a. At +25

28、C: In accordance with table I. b. At -55C and +125C: A 2 dB degradation from the +25C value shall be allowed except at 1 GHz. 3.4.8 Voltage drop. Voltage drop shall be in accordance with table I. 3.4.9 DC resistance. DC resistance shall be in accordance with table I. 3.4.10 Seal. In accordance with

29、MIL-PRF-28861, class B. 3.4.11 Solderability of terminals. In accordance with MIL-PRF-28861. 3.5 Product assurance level. Class B only. 3.6 Marking. Marking shall be in accordance with MIL-STD-1285 except the PIN shall be as specified in 1.2 with the manufacturers name or code, date code, voltage ra

30、ting, current rating, and terminal identification. 3.7 Manufacturer eligibility. To be eligible for listing as an approved source of supply, a manufacturer shall be listed on the MIL-PRF-28861 qualified products list for at least one part or perform first article inspection in accordance with the MI

31、L-PRF-28861 qualification inspection requirements for class B. 3.8 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply (see 6.3). 3.9 Recycled, recovered, or environmentally preferable materials. Recycled,

32、 recovered, or environmentally preferable materials should be used to the maximum extent possible provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs. Provided by IHSNot for ResaleNo reproduction or network

33、ing permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 84084 REV J PAGE 6 3.10 Workmanship. Parts shall be uniform in quality and free from any defects that will affect life, serviceability, or appearance. TABLE I. Electrical cha

34、racteristics. PIN 84084- Circuit Voltage drop maximum Maximum rated current (amps) Capaci-tance (F) -0, +100% DC resistance (ohms) maximum Minimum insertion loss (dB) in accordance with MIL-STD-220 1/ 2/ Volts ac rms Volts dc 100 kHz 150 kHz 300 kHz 1 MHz 10 MHz 100 MHz 1 GHz 001* C .14 .12 15 .15 .

35、008 7 10 16 26 40 52 70 002* L1 .47 .165 0.5 .15 .330 18 24 32 50 60 70 70 003* L2 .47 .165 0.5 .15 .330 18 24 32 50 60 70 70 004* L1 .47 .15 1.0 .15 .150 12 19 30 46 60 70 70 005* L2 .47 .15 1.0 .15 .150 12 19 30 46 60 70 70 006* L1 .32 .078 3.0 .15 .026 7 11 19 36 60 70 70 007* L2 .32 .078 3.0 .15

36、 .026 7 11 19 36 60 70 70 008* L1 .21 .065 5.0 .15 .013 7 10 16 28 54 70 70 009* L2 .21 .065 5.0 .15 .013 7 10 16 28 54 70 70 010* L1 .12 .08 10.0 .15 .008 7 10 16 25 48 70 70 011* L2 .12 .08 10.0 .15 .008 7 10 16 25 48 70 70 012* Pi .47 .165 0.5 .20 .330 24 34 52 80 80 80 80 013* Pi .47 .15 1.0 .20

37、 .150 16 27 46 74 80 80 80 014* Pi .32 .078 3.0 .20 .026 - - 30 60 80 80 80 015* Pi .21 .065 5.0 .20 .013 - - 12 50 80 80 80 016* Pi .12 .08 10.0 .20 .008 - - - 30 80 80 80 017* T .22 .07 1.0 .15 .07 6 12 25 48 70 70 70 018* T .32 .10 2.0 .15 .05 6 10 18 40 64 70 70 019* T .22 .12 4.0 .15 .03 6 10 1

38、6 31 58 70 70 020* C .14 .12 15 .01 .008 - - - 2 20 40 60 021* C .14 .12 15 .0027 .008 - - - - 10 28 50 022* C .14 .12 15 .001 .008 - - - - 2 20 35 1/ Insertion loss measurements shall be made under full load over the frequency range of 100 kHz to 10 MHz. Insertion loss measurements above this frequ

39、ency range shall be made under no load. 2/ The insertion loss requirements between any two adjacent specified frequencies shall be that of the lower of the two frequencies in order to accommodate resonant dips. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from

40、 IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 84084 REV J PAGE 7 4. VERIFICATION 4.1 Qualification inspection. Qualification inspection is not required. 4.2 Conformance inspection. 4.2.1 Inspection of product for delivery. Inspection of product for deliv

41、ery shall consist of groups A and B inspections of MIL-PRF-28861. 4.2.2 Certification. The acquiring activity, at its discretion, may accept a certificate of compliance with group B requirements in lieu of performing group B tests (see 6.3c). 5. PACKAGING 5.1 Packaging. For acquisition purposes, the

42、 packaging requirements shall be as specified in the contract or order (see 6.3). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are

43、maintained by the Inventory Control Points packaging activity within the Military Department or Defense Agency, or within the military services system commands. Packaging data retrieval is available from the managing Military Departments or Defense Agencys automated packaging files, CD-ROM products,

44、 or by contacting the responsible packaging activity. 6. NOTES (This section contains information of a general or explanatory nature which may be helpful, but is not mandatory.) 6.1 Intended use. Filters conforming to this drawing are intended for use when military specifications do not exist and qu

45、alified military devices that will perform the required function are not available for OEM application. This drawing is intended exclusively to prevent the proliferation of unnecessary duplicate specifications, drawings, and stock catalog listings. When a military specification exists and the produc

46、t covered by this drawing has been qualified for listing on QPL-28861, this drawing becomes obsolete and will not be used for new design. The QPL-28861 product shall be the preferred item for all applications. 6.2 Tin whisker growth. Pure tin plating is prohibited since it may result in tin whisker

47、growth. The use of alloys with tin content greater than 97 percent, by mass, may exhibit tin whisker growth problems after manufacture. Tin whiskers may occur anytime from a day to years after manufacture and can develop under typical operating conditions, on products that use such materials. Confor

48、mal coatings applied over top of a whisker-prone surface will not prevent the formation of tin whiskers. Alloys of 3 percent lead, by mass, have shown to inhibit the growth of tin whiskers. For additional information on this matter, refer to ASTM B545 (Standard Specification for Electrodeposited Coa

49、ting of Tin). 6.3 Ordering data. The contract or purchase order should specify the following: a. Complete PIN (see 1.2). b. Requirements for delivery of one copy of the conformance inspection data with each shipment of parts by the manufacturer. c. Whether the manufacturer performs the group B tests or provides certification o