ASTM E2663-2014(2018) Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods.pdf

《ASTM E2663-2014(2018) Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods.pdf》由会员分享，可在线阅读，更多相关《ASTM E2663-2014(2018) Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: E2663 14 (Reapproved 2018)Standard Practice forDigital Imaging and Communication in NondestructiveEvaluation (DICONDE) for Ultrasonic Test Methods1This standard is issued under the fixed designation E2663; the number immediately following the designation indicates the year oforiginal ad

2、option or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the U.S. Department of Defe

3、nse.1. Scope*1.1 This practice facilitates the interoperability of ultrasonicimaging equipment by specifying image data transfer andarchival storage methods in commonly accepted terms. Thisdocument is intended to be used in conjunction with PracticeE2339 on Digital Imaging and Communication in Nonde

4、struc-tive Evaluation (DICONDE). Practice E2339 defines an indus-trial adaptation of the NEMA Standards Publication titledDigital Imaging and Communications in Medicine (DICOM,see http:/medical.nema.org), an international standard forimage data acquisition, review, transfer and archival storage.The

5、goal of Practice E2339, commonly referred to asDICONDE, is to provide a standard that facilitates the displayand analysis of NDE test results on any system conforming tothe DICONDE standard. Toward that end, Practice E2339provides a data dictionary and set of information modules thatare applicable t

6、o all NDE modalities. This practice supple-ments Practice E2339 by providing information objectdefinitions, information modules and data dictionary that arespecific to ultrasonic test methods.1.2 This practice has been developed to overcome the issuesthat arise when analyzing or archiving data from

7、ultrasonic testequipment using proprietary data transfer and storage methods.As digital technologies evolve, data must remain decipherablethrough the use of open, industry-wide methods for datatransfer and archival storage. This practice defines a methodwhere all the ultrasonic technique parameters

8、and test resultsare communicated and stored in a standard format regardless ofchanges in digital technology.1.3 This practice does not specify:1.3.1 A testing or validation procedure to assess an imple-mentations conformance to the standard.1.3.2 The implementation details of any features of thestan

9、dard on a device claiming conformance.1.3.3 The overall set of features and functions to be ex-pected from a system implemented by integrating a group ofdevices each claiming DICONDE conformance.1.4 Although this practice contains no values that requireunits, it does describe methods to store and co

10、mmunicate datathat do require units to be properly interpreted. The SI unitsrequired by this practice are to be regarded as standard. Noother units of measurement are included in this standard.1.5 This standard does not purport to address all of thesafety concerns, if any, associated with its use. I

11、t is theresponsibility of the user of this standard to establish appro-priate safety, health, and environmental practices and deter-mine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accor-dance with internationally recognized principles on

12、 standard-ization established in the Decision on Principles for theDevelopment of International Standards, Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade (TBT) Committee.2. Referenced Documents2.1 ASTM Standards:2E1316 Terminology for Nondestructive Exa

13、minationsE1454 Guide for Data Fields for Computerized Transfer ofDigital Ultrasonic Testing Data (Withdrawn 2013)3E2339 Practice for Digital Imaging and Communication inNondestructive Evaluation (DICONDE)2.2 Other Documentation:National Electrical Manufacturers Association Standard forDigital Imagin

14、g and Communications in Medicine(DICOM), 201441This practice is under the jurisdiction of ASTM Committee E07 on Nonde-structive Testing and is the direct responsibility of Subcommittee E07.11 on DigitalImaging and Communication in Nondestructive Evaluation (DICONDE).Current edition approved June 1,

15、2018. Published July 2018. Originally approvedin 2008. Last previous edition approved in 2014 as E2663 - 14. DOI: 10.1520/E2663-14R18.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume info

16、rmation, refer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced onwww.astm.org.4Available from National Electrical Manufacturers Association (NEMA), 1300N. 17th St., Suite 1752, Rosslyn, VA 22209, http:/www.nema.org.*A Sum

17、mary of Changes section appears at the end of this standardCopyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United StatesThis international standard was developed in accordance with internationally recognized principles on standardization establishe

18、d in the Decision on Principles for theDevelopment of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.13. Terminology3.1 Definitions:3.1.1 Nondestructive evaluation terms used in this practicecan be found in Termi

19、nology E1316.3.1.2 DICONDE terms used in this practice are defined inPractice E2339.4. Summary of Practice4.1 A fundamental principle of DICONDE is the use ofstandard definitions and formats for data communication andstorage. This means all systems that are DICONDE compliantuse a common data diction

20、ary and common communicationprotocols. To further standardization, the elements in the datadictionary are organized into common groups referred to asinformation modules. The data dictionary and informationmodules common to all NDE modalities are defined in PracticeE2339.4.2 The data dictionary and i

21、nformation modules specifiedin Practice E2339 do not cover the information storagerequirements for each individual modality (CT, DR, CR, UT,etc.). Additions to the data dictionary and information modulesare required to support the individual modalities. This practicecontains the additions to the DIC

22、ONDE data dictionary andinformation modules necessary for ultrasonic inspection.4.3 The highest organizational level in the DICONDEinformation model is the information object definition (IOD).An information object definition is a collection of the infor-mation modules necessary to represent a set of

23、 test results froma specific modality. This practice contains the informationobject definitions for ultrasonic inspection.5. Significance and Use5.1 Personnel that are responsible for the creation, transfer,and storage of ultrasonic test results will use this standard. Thispractice defines a set of

24、information modules that along withPractice E2339 and the DICOM standard provide a standardmeans to organize ultrasonic test parameters and results. Theultrasonic test results may be displayed and analyzed on anydevice that conforms to this standard. Personnel wishing toview any ultrasonic inspectio

25、n data stored in DICONDEformat may use this document to help them decode and displaythe data contained in the DICONDE compliant inspectionrecord.6. Information Object Definitions6.1 Ultrasound Image IOD Description:6.1.1 The Ultrasound (US) Image Information Object Defi-nition specifies an image tha

26、t has been created by an ultrasoundimaging device for NDE purposes. The IOD definition willfollow that for US Images found in Part 3, Section A.6 of theDICOM standard except as noted in Table 1. Table 1 is notstand-alone and must be used in conjunction with Part 3,Section A.6 of the DICOM standard t

27、o have a completedefinition of the DICONDE US information object.6.1.2 This IOD will use the Service-Object Pair (SOP)Classes for the US IOD as defined in Part 4, Section B.5 of theDICOM standard.6.2 Ultrasound Multi-Frame Image:6.2.1 The Ultrasound Multi-Frame (US-MF) Image Infor-mation Object Defi

28、nition specifies a multi-frame image that hasbeen created by an ultrasound imaging device for NDEpurposes. The IOD definition will follow that for US-MFImages found in Part 3, Section A.7 of the DICOM standardexcept as noted in Table 2. Table 2 is not stand-alone and mustbe used in conjunction with

29、Part 3, Section A.7 of the DICOMstandard to have a complete definition of the DICONDEUS-MF information object.6.2.2 This IOD will use the Service-Object Pair (SOP)Classes for the US-MF IOD as defined in Part 4, Section B.5of the DICOM standard.TABLE 1 US Image Information Object DefinitionDICOM Modu

30、le DICONDE Module Reference UsagePatient Component E2339, Section 7 MClinical Trial Subject Not ApplicableGeneral Study Component Study E2339, Section 7 MPatient Study Not ApplicableClinical Trial Study Not ApplicableGeneral Series Component Series E2339, Section 7 MClinical Trial Series Not Applica

31、bleGeneral Equipment NDE Equipment E2339, Section 7 MContrast/bolous Not ApplicableSpecimen Not ApplicableUS Image NDE US Image Section 7.1 MUS Region Calibration Not ApplicableNDE US Equipment Section 7.2 UNDE US Equipment Settings Section 7.3 UNDE Indication E2339, Section 7 UNDE Geometry E2339, S

32、ection 7 UE2663 14 (2018)27. Information Modules7.1 NDE US Image Module:7.1.1 Table 3 specifies the Attributes that describe NDEultrasound images.7.1.1.1 For NDE US Images, Samples per Pixel (0028,0002) is specified to use the following values for specifiedPhotometric Interpretations.NDE US Image Sa

33、mples Per PixelPhotometric Interpretation Samples Per PixelValueMONOCHROME2 1RGB 3PALETTE COLOR 1TABLE 2 US-MF Image Information Object DefinitionDICOM Module DICONDE Module Reference UsagePatient Component E2339, Section 7 MClinical Trial Subject Not ApplicableGeneral Study Component Study E2339, S

34、ection 7 MPatient Study Not ApplicableClinical Trial Study Not ApplicableGeneral Series Component Series E2339, Section 7 MClinical Trial Series Not ApplicableGeneral Equipment NDE Equipment E2339, Section 7 MContrast/bolous Not ApplicableSpecimen Not ApplicableUS Image NDE US Image Section 7.1 MUS

35、Region Calibration Not ApplicableNDE US Equipment Section 7.2 UNDE US Equipment Settings Section 7.3 UNDE Indication E2339, Section 7 UNDE Geometry E2339, Section 7 UTABLE 3 NDE US Image Module AttributesAttribute Name Tag VR VM Type DescriptionSamples Per Pixel (0028,0002) US 1 1 Number of samples

36、per pixel (planes) in this image. See 7.1.1.1.Photometric Interpretation (0028,0004) CS 1 1 Specifies the intended interpretation of the pixel data. See 7.1.1.2.Bits Allocated (0028,0100) US 1 1 Number of bits allocated for each pixel data. See 7.1.1.3.Bits Stored (0028,0101) US 1 1 Number of bits s

37、tored for each pixel data. See 7.1.1.4.High Bit (0028,0102) US 1 1 Most significant bit for pixel data.Planar Configuration (0028,0006) US 1 1C Indicates whether the pixel data is sent color by plane or color by pixel.Required if Samples Per Pixel (0028, 0002) has a value greater than 1.See 7.1.1.5.

38、Pixel Representation (0028,0103) US 1 1 Representation of pixel data. See 7.1.1.6.Frame Increment Pointer (0028,0009) AT 1-n 1C Contains the Data Element Tag of the attribute that is used as the frameincrement in multi-frame pixel data. Required if number of frames issent. See 7.1.1.7.Image Type (00

39、08,0008) CS 1-n 1 Image identification characteristics. See 7.1.1.8.Lossy Image Compression (0028,2110) CS 1 1C Specifies whether an image has undergone lossy compression.Enumerated Values00 = NO lossy compression01 = Lossy compressionRequired if lossy compression has been performed on the image.Num

40、ber of Surfaces (0008,2124) IS 1 3 Number of distinct scan surfaces on the inspection specimen.Number of Gates in Surface (0008,212A) IS 1 3 Number of inspection gates associated in this scan surface.Surface Name (0008,2120) SH 1 3 Name of this scan surface.Surface Number (0008,2122) IS 1 3 Number o

41、f this scan surface.Gate Name (0008,2127) SH 1 3 User defined name of this inspection gate. See 7.1.1.9 for definition ofGate.Gate Number (0008,2128) IS 1 3 User defined number of this inspection gate. See 7.1.1.9 for definition ofGate.Acquisition Date / Time (0008,002A) DT 1 3 The date and time tha

42、t the acquisition of data that resulted in this imagestarted.Physical Units X Direction (0018,6024) US 1 1 The physical units of the dimension of the region. See 7.1.1.10 for validvalues.Physical Units Y Direction (0018,6026) US 1 1 The physical units of the dimension of the region. See 7.1.1.10 for

43、 validvalues.Physical Delta X (0018,602C) FD 1 1 The physical value per positive X pixel increment. The units are asspecified in the Physical Units X Direction (0018,6024). See 7.1.1.11.Physical Delta Y (0018,602E) FD 1 1 The physical value per positive Y pixel increment. The units are asspecified i

44、n the Physical Units Y Direction (0018,6024). See 7.1.1.11.E2663 14 (2018)37.1.1.2 For NDE US Images, Photometric Interpretation(0028,0004) is specified to use the following defined terms. SeePart 3 Section C.7.6 of the DICOM standard for definitions ofthe terms.MONOCHROME2 PALETTE COLOR RGB7.1.1.3

45、For NDE US Images, Bits Allocated (0028,0100) isspecified to use the following values for specified PhotometricInterpretations.NDE US Image Bits AllocatedPhotometric Interpretation Bits Allocated ValueMONOCHROME2 8RGB 8PALETTE COLOR 88bitpalette,or1616bitpalette7.1.1.4 For NDE US Images, Bits Stored

46、 (0028,0101) isspecified to use the following values for specified PhotometricInterpretations.NDE US Image Bits StoredPhotometric Interpretation Bits Stored ValueMONOCHROME2 8RGB 8PALETTE COLOR 88bitpalette,or1616bitpalette7.1.1.5 For NDE US Images, Planar Configuration (0028,0006) is specified to u

47、se the following values for specifiedPhotometric Interpretations.NDE US Planar ConfigurationPhotometricInterpretationPlanar Configuration ValueRGB 0 color by pixel, or1 color by plane7.1.1.6 For NDE US Images, Pixel Representation (0028,0103) is specified to use the following Enumerated Value:0000H

48、= unsigned integer0001H = signed integer7.1.1.7 For NDE US multi-frame images, the AttributeFrame Increment Pointer (0028,0009) of the Multi-frameModule (see DICOM Part 3 Section C.7.6.6) is specified by thefollowing defined terms:00181063 = sequencing by Frame Time (0018,1063)00181065 = sequencing

49、by Frame Time Vector (0018,1065)7.1.1.8 For NDE US Images and NDE US-MF Images,Image Type (0008,0008) is specified to be Type 2. The definedterms for value 3 are:C_SCAN B_SCAN TOF C_SCANVOLUME SCANValue 4 contains information about the ultrasonic inspectionmode. The defined terms for value 4 are:LONGITUDINAL SHEAR SURFACE WAVETOFD THRU TRANS LAMBSHEAR HORIZ SHEAR VERT7.1.1.9 For Gate Name (0008,2127) and Gate Number(0008,2128), the term Gate refers to a period of time overwhich ultrasonic data is collected. Gates are typically associ-ated with regions within the test sp