AECMA PREN 4660-002-2009 Aerospace series Modular and Open Avionics Architectures Part 002 Final Draft of Proposed Standards for Common Functional Modules Edition P 1《航空航天系列.模块化和开放.pdf

《AECMA PREN 4660-002-2009 Aerospace series Modular and Open Avionics Architectures Part 002 Final Draft of Proposed Standards for Common Functional Modules Edition P 1《航空航天系列.模块化和开放.pdf》由会员分享，可在线阅读，更多相关《AECMA PREN 4660-002-2009 Aerospace series Modular and Open Avionics Architectures Part 002 Final Draft of Proposed Standards for Common Functional Modules Edition P 1《航空航天系列.模块化和开放.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、ASD STANDARD NORME ASD ASD NORM prEN 4660-002 Edition P 1 July 2009 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATIONAvenue de Tervuren, 270 - B-1150 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 775 8131 - www.asd-stan.orgICS: Descriptors: ENGLISH VERSION Aer

2、ospace series Modular and Open Avionics Architectures Part 002: Final Draft of Proposed Standards for Common Functional Modules Srie arospatiale Architectures Avioniques Modulaires et Ouvertes Partie 002 : Proposition Finale des Standards pour les CFM Luft- und Raumfahrt Modulare und offene Avionika

3、rchitekturen Teil 002: Endgltiger Entwurf des Standards fr CFM This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry.

4、It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of

5、the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to impl

6、ement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 31 July 2009 Comments should be sent within six months after the date of publication to ASD-STAN Engineering Procedure

7、s Domain Copyright 2009 by ASD-STAN Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 4660-002:2009 (E) 2 Contents Page Foreword3 0.1 Purpose.4 0.2 Document structure.5 1 Scope 5 1.1 Relationship with o

8、ther ASAAC Standards 5 2 Normative references 6 3 Terms, definitions and abbreviations6 3.1 Terms and definitions .6 3.2 Abbreviations.7 3.3 Conventions used in this Standard .9 4 CFM Definition9 4.1 Generic CFM 10 4.2 Module Support Unit. 12 4.3 Module Processing Capability. 19 4.4 Network Interfac

9、e Unit (NIU) and Routing Unit (RU) . 28 4.5 Module Power Supply Element . 28 4.6 Module Physical Interface (MPI. 30 5 Common Functional Module Interfaces . 30 5.1 Module Logical Interface (MLI) 30 5.2 Module Physical Interface (MPI) 30 5.3 MOS Interface 31 6 CFM System Support and Guidelines.31 6.1

10、Fault Management 32 6.2 Fault Detection 32 6.3 Fault Masking 32 6.4 Fault Confinement 32 6.5 Safety and Security. 33 Annex A (informative) Performance Sheet for all Common Functional Modules 35 A.1 Data Processor Module 35 A.2 Signal Processing Module . 36 A.3 Graphic Processing Module 37 A.4 Mass M

11、emory Module 37 A.5 Network Support Module . 38 A.6 Power Conversion Module. 38 Figures Page Figure 1 ASAAC Standard Documentation Hierarchy.4 Figure 2 Functional representation of a generic CFM. 10 Figure 3 IMA Common Functional Modules Graphical Composition . 20 Figure 4 The Power Supply Distribut

12、ion functions of the PCM . 25 Figure 5 Power Supply Element functions . 29 Figure 6 Software Architecture Model - Three Layer Stack 31 Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 4660-002:2009 (E)

13、 3 Tables Page Table 1 CFM Embedded Information Read Only .13 Table 2 CFM Embedded Information Read / Write 14 Table 3 PCM output characteristics.26 Table 4 PSE input voltage characteristics 29 Table A-1 Performance sheet for a DPM .35 Table A-2 Performance sheet for a SPM36 Table A-3 Performance sh

14、eet for a GPM .37 Table A-4 Performance sheet for a MMM 37 Table A-5 Performance sheet for a NSM .38 Table A-6 Performance sheet for a PCM .38 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Engineering Procedures Domain. After inquiries and votes carried out in

15、accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 4660-002:2009 (E

16、) 4 0 Introduction 0.1 Purpose This document was produced under the ASAAC Phase II Contract. The purpose of the ASAAC Programme is to define and validate a set of open architecture standards, concepts and guidelines for Advanced Avionics Architectures (A3) in order to meet the three main ASAAC drive

17、rs. The standards, concepts and guidelines produced by the Programme are to be applicable to both new aircraft and update programmes. The three main drivers for the ASAAC Programme are: 1. Reduced life cycle costs. 2. Improved mission performance. 3. Improved operational performance. The Standards a

18、re organised as a set of documents including: A set of agreed standards that describe, using a top down approach, the Architecture overview to all interfaces required to implement the core within avionics systems, The guidelines for system implementation through application of the standards. The doc

19、ument hierarchy is given hereafter: (in this figure, the current document is highlighted) Guidelines for System Issues System Management Fault Management Initialisation / Shutdown Configuration / Reconfiguration Time Management Security Safety Standards for Architecture Standards for Common Function

20、al Modules Standards for Communications and Network Standards for Packaging Standards for Software Figure 1 ASAAC Standard Documentation Hierarchy Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 4660-

21、002:2009 (E) 5 0.2 Document structure The document contains the following sections: Section 1, scope of the document. Section 2, normative references. Section 3, the terms, definitions and abbreviations. Sections 4 and 5 provide CFM concept definition, requirements and standards. Section 6 provides

22、guidelines for implementation of standards. Performance sheets for each of the CFMs are attached to the end of the document. These sheets contain a list of attributes to be defined by the system designer and used by the CFM provider. 1 Scope This standard defines the functionality and principle inte

23、rfaces for the Common Functional Module (CFM) to ensure the interoperability of Common Functional Modules and provides design guidelines to assist in implementation of such a CFM. It is one of a set of standards that define an ASAAC (Allied Standard Avionics Architecture Council) Integrated Modular

24、Avionics System. This definition of interfaces and functionality allows a CFM design that is interoperable with all other CFM to this standard, that is technology transparent, that is open to a multi-vendor market and that can make the best use of COTS technologies. Although the physical organisatio

25、n and implementation of a CFM should remain the manufacturers choice, in accordance with the best use of the current technology, it is necessary to define a structure for each CFM in order to achieve a logical definition of the CFM with a defined functionality. This definition includes: The Generic

26、CFM, which defines the generic functionality applicable to the complete set of CFMs. The generic functionality is defined in section 4.1. The processing capability, which defines the unique functionality associated with each CFM type within the set. This functionality is defined in section 4.3. The

27、logical and physical interfaces that enable CFMs to be interoperable and interchangeable, these are defined in section 6. The functionality required by a CFM to support the operation of the System is defined in section 6. 1.1 Relationship with other ASAAC Standards The definition of the complete CFM

28、 is partitioned and is covered by the following ASAAC standards: CFM Mechanical properties and physical Interfaces ASAAC Standards for Packaging. CFM Communication functions ASAAC Standards for Software. CFM Network interface ASAAC Standards for Communications and Network. CFM Software architecture

29、ASAAC Standards for Software. CFM Functional requirements This document. Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 4660-002:2009 (E) 6 2 Normative references The following referenced documents a

30、re indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1540, Aerospace Characteristics of aircraft electrical systems. EN 4660-001, Aero

31、space series Modular and open Avionics Architectures Part 001: Final Draft of Proposed Standards for Architecture. 1)EN 4660-003, Aerospace series Modular and open Avionics Architectures Part 003: Final Draft of Proposed Standards for Communications/Network. 1)EN 4660-004, Aerospace series Modular a

32、nd open Avionics Architectures Part 004: Final Draft of Proposed Standards for Packaging. 1)EN 4660-005, Aerospace series Modular and open Avionics Architectures Part 005: Final Draft of Proposed Standards for Software. 1)ASAAC2-GUI-32450-001-CPG Issue 01, Final Draft of Guidelines for System Issues

33、 2) Volume 1 System Management. Volume 2 Fault Management. Volume 3 Initialisation and Shutdown. Volume 4 Configuration / Reconfiguration. Volume 5 Time Management. Volume 6 Security. Volume 7 Safety. 3 Terms, definitions and abbreviations 3.1 Terms and definitions Use of “shall”, “should” and “may”

34、 within the standards observe the following rules: The word SHALL in the text express a mandatory requirement of the standard. The word SHOULD in the text expresses a recommendation or advice on implementing such a requirement of the standard. It is expected that such recommendations or advice will

35、be followed unless good reasons are stated for not doing so. 1) Published as ASD Prestandard at the date of publication of this standard. 2) Published by: Allied Standard Avionics Architecture Council. Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or netwo

36、rking permitted without license from IHS-,-,-prEN 4660-002:2009 (E) 7 The word MAY in the text expresses a permissible practice or action. It does not express a requirement of the standard. Open System: A system with characteristics that comply with specified, publicly maintained, readily available

37、standards and that therefore can be connected to other systems that comply with these same standards. 3.2 Abbreviations 2D : Two Dimensional 3D : Three Dimensional A3 : Advanced Avionics Architecture AGT : Absolute Global Time ALT : Absolute Local Time APOS : Application to Operating System Interfac

38、e ASAAC : Allied Standard Avionics Architecture Council BIT : Built-in Test CBIT : Continuous BIT CFM : Common Functional Module CORBA : Common Object Request Broker Architecture COTS : Commercial Off The Shelf CRC : Cyclic Redundancy Check dc : Direct Current DPM : Data Processing Module DSP : Digi

39、tal Signal Processor EDAC : Error Detection And Correction FFT : Fast Fouriert Transformation FIR : Finite Impulse response Filter FMECA : Fault Mode Effect and Criticality Analysis GPM : Graphic Processing Module GSM : Generic System Management HW : Hardware HDD : Head-Down Display HMD : Helmet Mou

40、nted Display HUD : Head-Up Display IBIT : Initiated BIT ID : Identification Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 4660-002:2009 (E) 8 IDL : Interface Definition Language IEEE : Institute of

41、Electrical and Electronics Engineers IFFT : Inverse Fast Fourier Transformation IMA : Integrated Modular Avionics ISO : International Standards Organisation ITM : Integrated Test and Maintenance JTAG : Joint Test Action Group MC : Module Controller MIS : Module Initialisation Support MLI : Module Lo

42、gical Interface MMM : Mass Memory Module MOS : Module Support Layer to Operating System Interface MPI : Module Physical Interface MSL : Module Support Layer MSU : Module Support Unit MTP : Maintenance Test Port N/A : Not Applicable NIU : Network Interface Unit NSM : Network Support Module OMG : Obje

43、ct Management Group O/P : Output OS : Operating System OSL : Operating System Layer PBIT : Power-up / power-down BIT PCM : Power Conversion Module PCU : Power Conversion Unit PE : Processing Element PMS : Power Management System PSA : Power Switch Array PSE : Power Supply Element PU : Processing Uni

44、t RC : Reference Clock RLT : Relative Local Time Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 4660-002:2009 (E) 9 RTBP : Runtime Blueprints RU : Routing Unit SPM : Signal Processing Module TC : Tra

45、nsfer Connection TLS : Three Layer Stack Vdc : Voltage dc 3.3 Conventions used in this Standard The Interface Definition Language (IDL) as defined in the Common Object Request Broker Architecture (CORBA) 2.3 is used to express the MOS services as programming language independent services in this doc

46、ument. The conventions used in this document are as follows: 3.3.1 Special Fonts Words that have a special meaning appear in specific fonts or font styles. All code listings, reserved words and the name of actual data structures, constants, and routines are shown in Courier. 3.3.2 Naming Conventions

47、 Parameter and variable names contain only words with lower case letters, which are separated by underscore. Example vc_message NOTE Upper and lower case letters are treated as the same letter. 4 CFM Definition The Common Functional Modules (CFMs) are line replaceable items and provide an ASAAC IMA

48、system with a computational capability, network support capability and power conversion capability. The following set of modules have been defined for use within an IMA core processing system: Signal Processing Module (SPM). Data Processing Module (DPM). Graphics Processing Module (GPM). Mass Memory Module (MMM). Network Support Module (NSM). Power Conversion Module (PCM). This set of CFMs complies with the generic CFM format defined in this section. It is assumed that a System Design Specification will b