ETSI TS 102 891-1-2018 Core Network and Interoperability Testing (INT) Message Waiting Indication (MWI) using IP Multimedia (IM) Core Network (CN) subsystem Conformance Test Specif_1.pdf

《ETSI TS 102 891-1-2018 Core Network and Interoperability Testing (INT) Message Waiting Indication (MWI) using IP Multimedia (IM) Core Network (CN) subsystem Conformance Test Specif_1.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 102 891-1-2018 Core Network and Interoperability Testing (INT) Message Waiting Indication (MWI) using IP Multimedia (IM) Core Network (CN) subsystem Conformance Test Specif_1.pdf（13页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 102 891-1 V4.1.1 (2018-06) Core Network and Interoperability Testing (INT); Message Waiting Indication (MWI) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance Test Specification (3GPP Release 12); Part 1: Protocol Implementation Conformance Statement (PICS) TECHNICAL SPECIFI

2、CATION ETSI ETSI TS 102 891-1 V4.1.1 (2018-06)2Reference RTS/INT-00154-1 Keywords conformance, MWI, PICS, SIP, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif

3、 enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the prese

4、nt document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network dri

5、ve within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in th

6、e present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as au

7、thorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are tr

8、ademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by th

9、e GSM Association. ETSI ETSI TS 102 891-1 V4.1.1 (2018-06)3Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g3

10、3.2 Abbreviations . 6g34 Conformance to this PICS pro forma specification 6g34.0 Introduction 6g34.1 Guidance for completing the PICS pro forma 7g34.1.1 Purposes and structure 7g34.1.2 Abbreviations and conventions . 7g34.1.3 Instructions for completing the PICS pro forma . 8g34.2 Identification of

11、the implementation 8g34.2.0 Introduction. 8g34.2.1 Date of the statement 8g34.2.2 Implementation Under Test (IUT) identification 9g34.2.3 System Under Test (SUT) identification 9g34.2.4 Product supplier 9g34.2.5 Client (if different from product supplier) 10g34.2.6 PICS contact person 10g34.3 Identi

12、fication of the Protocol specification. 11g34.4 Global statement of conformance . 11g34.5 Roles . 11g34.6 User role . 11g34.6.0 Introduction. 11g34.6.1 Major capabilities . 11g34.7 Network role . 11g34.7.0 Introduction. 11g34.7.1 Major capabilities . 12g3History 13g3ETSI ETSI TS 102 891-1 V4.1.1 (20

13、18-06)4Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000

14、314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investiga

15、tion, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document ma

16、y include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the

17、 present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Core Network and Interoperability Testing (INT). The present document is part

18、 1 of a multi-part deliverable covering the Conformance Test Specification of Message Waiting Indication (MWI) using IP Multimedia (IM) Core Network (CN) subsystem, as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suite Structure and Test Purposes (T

19、SS Part 3: “Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification“. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be i

20、nterpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction To evaluate conformance of a particular implementation, it is necessary to ha

21、ve a statement of which capabilities and options have been implemented for a telecommunication specification. Such a statement is called a Protocol Implementation Conformance Statement (PICS). ETSI ETSI TS 102 891-1 V4.1.1 (2018-06)51 Scope The present document provides the Protocol Implementation C

22、onformance Statement (PICS) pro forma for the Message Waiting Indication (MWI) using IP Multimedia (IM) Core Network (CN) subsystem supplementary service defined in ETSI TS 124 606 1 in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 4

23、and ETSI ETS 300 406 2. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the re

24、ferenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at https:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot g

25、uarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI TS 124 606: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Message Waiting Indication (MWI) using I

26、P Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.606 Release 12)“. 2 ETSI ETS 300 406 (10-1995): “Methods for testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 3 ISO/IEC 9646-1: “Information techno

27、logy - Open systems interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 4 ISO/IEC 9646-7: “Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 5 IETF RFC 3842:

28、 “A Message Summary and Message Waiting Indication Event Package for the Session Initiation Protocol (SIP)“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited

29、version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents

30、 are not necessary for the application of the present document but they assist the user with regard to a particular subject area. Not applicable. ETSI ETSI TS 102 891-1 V4.1.1 (2018-06)63 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definition

31、s given in ETSI TS 124 606 1, ISO/IEC 9646-1 3, ISO/IEC 9646-7 4 and the following apply: ICS pro forma: document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICS Implementation Conformance Statement (ICS): statement made by the supplier of an impl

32、ementation or system claimed to conform to a given specification, stating which capabilities have been implemented NOTE: The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information object ICS, etc. Protocol ICS (PICS): ICS for an implementation or system claimed to c

33、onform to a given protocol specification NOTE: This may contain additional information. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ETSI TS 124 606 1 and the following apply: ICS Implementation Conformance Statement IUT Implementation Under Test MA Message

34、Account MNUA MWI Notifier User Agent MWI Message Waiting Indication PDU Protocol Data Unit PICS Protocol Implementation Conformance Statement SCS System Conformance Statement SUT System Under Test 4 Conformance to this PICS pro forma specification 4.0 Introduction If it claims to conform to the pres

35、ent document, the actual PICS pro forma to be filled in by a supplier shall be technically equivalent to the text of the PICS pro forma given in clause 4, and shall preserve the numbering/naming and ordering of the pro forma items. A PICS which conforms to the present document shall be a conforming

36、PICS pro forma completed in accordance with the guidance for completion given in clause 4.1. The right to copy Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the application form

37、for testing so that it can be used for its intended purposes and may further publish the completed application form. ETSI ETSI TS 102 891-1 V4.1.1 (2018-06)74.1 Guidance for completing the PICS pro forma 4.1.1 Purposes and structure The purpose of this ICS pro forma is to provide a mechanism whereby

38、 a supplier of an implementation of the requirements defined in ETSI TS 124 606 1 may provide information about the implementation in a standardized manner. The ICS pro forma is subdivided into clauses for the following categories of information: - guidance for completing the ICS pro forma; - identi

39、fication of the implementation; - identification of the ; - global statement of conformance; - roles; - user role: - major capabilities; - network role: - major capabilities. 4.1.2 Abbreviations and conventions The ICS pro forma contained in this clause is comprised of information in tabular form in

40、 accordance with the guidelines presented in ISO/IEC 9646-7 4. Item column The item column contains a number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “i

41、s the requirement or option supported by the implementation?“. Status column The following notations, defined in ISO/IEC 9646-7 4, are used for the status column: m mandatory - the capability is required to be supported. o optional - the capability may be supported or not. n/a not applicable - in th

42、e given context, it is impossible to use the capability. x prohibited (excluded) - there is a requirement not to use this capability in the given context. o.i qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies an unique group of related o

43、ptional items and the logic of their selection which is defined immediately following the table. Reference column The reference column makes reference to ETSI TS 124 606 1, except where explicitly stated otherwise. ETSI ETSI TS 102 891-1 V4.1.1 (2018-06)8Support column The support column shall be fi

44、lled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 4, are used for the support column: Y or y supported by the implementation. N or n not supported by the implementation. N/A, n/a or - no answer required (allowed only if the status is n/a, direct

45、ly or after evaluation of a conditional status). If this ICS pro forma is completed in order to describe a multiple-profile support in a system, it is necessary to be able to answer that a capability is supported for one profile and not supported for another. In that case, the supplier shall enter t

46、he unique reference to a conditional expression, preceded by “?“ (e.g. ?3). This expression shall be given in the space for comments provided at the bottom of the table. It uses predicates defined in the SCS, each of which refers to a single profile and which takes the value TRUE if and only if that

47、 profile is to be used. EXAMPLE: ?3: IF prof1 THEN Y ELSE N NOTE: As stated in ISO/IEC 9646-7 4, support for a received PDU requires the ability to parse all valid parameters of that PDU. Supporting a PDU while having no ability to parse a valid parameter is non-conformant. Support for a parameter o

48、n a PDU means that the semantics of that parameter are supported. Prerequisite line A prerequisite line takes the form: Prerequisite: Prerequisite: 4.5.1/2 network role. A prerequisite line after a clause or table title indicates that the whole clause or the whole table is not required to be complet

49、ed if the predicate is FALSE. 4.1.3 Instructions for completing the PICS pro forma The supplier of the implementation shall complete the PICS pro forma in each of the spaces provided. In particular, an explicit answer shall be entered, in each of the support column boxes provided, using the notation described in clause 4.1.2. However, the tables containing in “user role“ clause shall only be completed for user implementations, and the tables containing in “network role“ clause shall only be completed for network implementations. If necessar