ETSI ES 201 071-1998 Public Switched Telephone Network (PSTN) Protocol Over the Local Loop for Display Services Server Display and Script Services (SDSS)《公用交换电话网(PSTN) 用于显示业务的本地环路协_1.pdf

《ETSI ES 201 071-1998 Public Switched Telephone Network (PSTN) Protocol Over the Local Loop for Display Services Server Display and Script Services (SDSS)《公用交换电话网(PSTN) 用于显示业务的本地环路协_1.pdf》由会员分享，可在线阅读，更多相关《ETSI ES 201 071-1998 Public Switched Telephone Network (PSTN) Protocol Over the Local Loop for Display Services Server Display and Script Services (SDSS)《公用交换电话网(PSTN) 用于显示业务的本地环路协_1.pdf（45页珍藏版）》请在麦多课文档分享上搜索。

1、 STD-ETSI ES 201 071-ENGL 1998 = 3400855 0341873 426 = ES 201 071 1.1.2 (1998-10) ETSI Standard Public Switched Telephone Network (PSTN); Protocol over the local loop for display services; Server Display and Script Services (SDSS) European adaptation of Bellcore SR-INS-O02461 and TR-NWT-0012731 STD*

2、ETSI ES 201 071-ENGL 1998 3400855 0343874 362 2 ES 201 071 V1.1.2 (1998-1 O) Reference DESIATA-005062 (9X000idd.PDF) Keywords CLIP, PSTN, supplementary services Postai address F-O6921 Sophia Antipolis Cedex - FRANCE Office address 650 Route des Lucioles - Sophia Antipolis Valbonne - FRANCE Siret No

3、348 623 562 00017 - NAF 742 C Association but non lucratif enregistre ia Sous-Prfecture de Grasse (OS) Na 7803188 Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Internet secretariat etsi.fr hiip:Jiwww.etsi.org Copyright Notification No pari may be reproduced except as authorized by written permissio

4、n. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 1998. All rights reserved. 3 ES 201 071 V1.1.2 (1998-10) Contents Intellectual Property Rights 7 Foreword 7 Introduction 7 1 Scope 8 2 References 8 3 Definitions and

5、abbreviations 9 3.1 Definitions . 9 3.2 Abbreviations . 9 4 Requirements . 10 4.1 Access requirements 10 4.2 SDSS requirements 10 5 EMC requirements . 10 6 Safety requirements 10 Annex A (normative): SR-INS-002461 . 11 A.l Introduction 11 A.l.l Purpose 11 A.1.2 Definitions . 11 A.1.3 Background 11 A

6、.1.4 Related documents . 11 A.1.5 Scope . 11 A.2 A.2.1 A.2.1.1 A.2.1.2 A.2.1.3 Formatting Virtual Display Pages 12 A.2.1.4 Soft Key Tuple Information . 12 A.2.1.5 Display Character Attributes 12 A.2.1.6 Global Prompt 12 A.2.2 Feature Key Management (FKM) 12 A.2.2.1 Soft Keys 12 A.2.2.1.1 Soft Key De

7、finers . 12 A.2.2.1.2 Soft Key Definer Number . 12 A.2.2.1.3 Soft Key Label String . 12 A.2.2.1.4 Soft Key Return String . 13 A.2.2.2 PageLine Up and Down Keys . 13 A.2.2.3 Line Soft Key Tuples . 13 A.2.3 Terminal Control Management 13 A.2.3.1 Display . 13 A.2.3.2 Call Reference Buffers . 13 A.2.3.3

8、 Current Line Number Buffer 13 A.2.3.4 Active Line . 13 A.2.3.5 Input Format Table . 13 A.2.3.6 Input Buffer 13 A.2.3.7 CPE (TE) ID and CPE (TE) Configuration 13 A.2.4 A.2.5 Feature Download Management (FDM) 14 A.2.5.1 FDM Security . 14 A.2.5.2 Feature Download Management (FDM) Page 14 A.2.5.2.1 FDM

9、 Maintenance 14 A.2.5.2.2 FDM Display 14 Abstract CPE (TE) . 12 Virtual Display Management . 12 Information Display Page . 12 Communication Display Page 12 Modem Management (MM) . 14 STD-ETSI ES 201 071-ENGL 1998 3L100855 0341876 135 W A.2.5.2.3 A . 2.5.3 A.2.5.3.1 A.2.5.3.2 A.2.5.4 A.2.5.5 A.2.5.6

10、A.2.6 A.2.7 A.2.8 A.2.9 4 ES 201 071 V1.1.2 (1998-10) Default Service . 14 Downloadable Data 14 Service Script 14 Tables . 16 Service-Script Interpreter . 16 Starting and Ending a Service Script 16 Service Script Example 16 Hanging Up (Call release) . 16 Idle State Settings 16 Off-hook CPE Modes (On

11、-line TE modes) 16 Summary of Abstract CPE (TE) 16 A.3 A.3.1.1 Minimum requirements for physical CPE (TE) . 17 A.3.1 Signalling Capabilities . 17 Signai Detection and Generation - Physical Layer . 17 A.3.1.1.1 A.3.1.1.1.1 A.3.1.1.2 A.3.1.1.2.1 A.3.1.1.2.2 A.3.1.1.2.3 A.3.1.1.2.4 A.3.1.1.2.5 A.3.1.1.

12、2.6 A.3.1.1.2.7 A.3.1.1.2.8 A.3.1.1.3 A.3.1.1.4 A.3.1.1.4.1 A.3.1.1.4.1.1 A.3.1.1.4.1.2 A.3.1.1.4.1.3 A.3.1.1.4.1.4 A.3.1.1.4.1.5 A.3.1.1.4.2 A.3.1.1.4.2.1 A.3.1.1.4.2.2 A.3.1.1.4.2.3 FSK Data Transmission Interface . 17 Signalling levels 17 Server-CPE (TE) Handshaking Signais 17 Network to TE opera

13、ting sequence . 17 Timing requirements . 18 Voice path muting . 18 TE - Acknowledgement signai (TE-ACK) 18 TE - ADSI Message Acknowledgement signal . 19 Start time . 19 End time 19 Timeout - FSK data transmission not received . 19 Timers . 19 Signal Detection and Generation 19 Signal Detection 19 TE

14、 Alerting Signal (TAS) . 19 Call Progress Tones (Network tones) 19 Power Ringing . 20 On-HooWOff-Hook . 20 Extension in Use 20 Signal generation . 20 Dual-Tone Multifrequency (DTMF) . 20 Dial pulse One . 20 Disconnect and Switch-hook Flash 20 A.3.1.2 Signalling Layer . Link protocol 20 A.3.1.3 Messa

15、ge Layer 20 A.3.1.3.1 Non-ADS1 Message 20 A.3.1.3.1.1 Existing non-ADS1 Messages . 20 A.3.1.3.1.2 Future TR-NWT-oooO30 MDMF Parameter 21 A.3.1.3.2 ADSI Messages 21 A.3.2 Display . 21 A.3.2.1 Display Size . 21 A.3.2.2 Displaying Virtual Pages 22 A.3.2.2.1 Wrapping Indicator . 22 A.3.2.3 A.3.2.4 Curso

16、r . 22 A.3.2.5 Active Line . 22 A.3.2.6 Display Alphanumeric Mode . 22 A.3.2.7 Interaction between Server Display Control and Feature Download Applications 22 A.3.3 Soft Keys . 22 A.3.4 Size of FDM page . 22 A.3.5 Local Scrolling . 22 A.3.5.1 Active Logical Section Buffer 22 A.3.5.2 A.3.5.3 Local Gl

17、obal Prompt Copy 22 A.3.5.4 Scrolling or Page Upmown . 23 A.3.6 Information Automatic Select (INAS) . 23 Display Character Attributes 22 Active Soft Key Definer . 22 STD=ETSI ES 201 071-ENGL 1998 3400855 0341877 071 m 5 ES 201 071 V1.1.2 (1998-10) A.3.7 Assigning CPE (TE) ID . 23 A.3.8 Manual Operat

18、ion 23 A.3.9 Memory Requirements . 23 A.3.9.1 Virtual Display Pages . 23 A.3.9.2 Soft Key Definer Table 23 A.3.9.3 Call Reference Buffers . 23 A.3.9.4 Input Buffers 23 A.3.9.5 Input Format Buffer . 23 A.3.9.6 Default Soft Key Tuple 23 A.3.9.7 Current Line Number Buffer 23 A.3.9.8 Service Script and

19、associated Tables 23 A.3.9.8.1 Hags . 24 A.3.9.8.2 CPE (TE) Script Soft Key Table 24 A.3.9.8.3 Predefined Display Table . 24 A.3.9.8.4 Service Script 24 A.3.9.9 A.3.10 Data Preservation . 24 A.3.11 Extension Phones . 24 A.4 Error treatment . 24 A.4.1 User Input 24 A.4.2 Data Structures . 24 A.4.3 A.

20、4.4 Data Transmission . 24 A.4.6 A.4.7 A.5 Other CPE (TE) considerations . 25 A.5.1 CPE (TE)-based Functions 25 A.5.2 CPE (TE) Functionality and Impact on Services . 25 A.5.2.1 Downloading the initial Service Script . 25 A.5.2.2 On-hook CPE (TE) display 25 A.5.3 A.5.4 Industry Standards and FCC Regu

21、lations 25 Appendix 1: Components of the abstract CPE (TE) . 25 Appendix 2: Samples of Service Scripts . 25 Summary of Memory Requirement 24 Undefined lines in Virtual Displays . 24 A.4.5 Message Sequence . 24 Network-CPE (TE) Signal Detection . 25 Network-CPE (TE) Signal Generation . 25 Interaction

22、 between a Server Display Session and a Call WaitingICIDCW 25 Annex B (normative): TR-NWT-001273 . 26 B.l Introduction 26 B.i.1 Definition . 26 B.1.2 Background 26 B.1.2.1 Scope 26 B.1.3 Customer Perspective . 26 B.1.4 ADSI Compatible CPE (TE) 26 B.l.5 Requirements Technology . 26 B.2 Interface oper

23、ations 26 B.2.1 B.2.1.1 Server Display Control Messages 26 B.2.1.2 Feature Download Messages 26 B.2.2 Session Interruption Treatment 27 B.2.3 Errors and Retransmission . 27 B.3 ADSI protocol 27 B.3.1 First Layer (Physical Layer) . 27 B.3.2 B.3.2.1 Message Format for Datalink Layer . 27 B.3.2.2 Stand

24、ard ADSI Protocol - Functions to support the Datalink Layer 27 B.3.3 Third (Message) Layer . 27 Introduction to categories of message 26 Second Layer (Datalink Layer) 27 ETSI STDoETSI ES 203 073-ENGL 3998 = 3400855 0343878 TO8 6 ES 201 071 V1.1.2 (199-10) B.4 Standard ADSI Data Message Parameters .

25、28 B.4.1 ADSI Server Display Control Message Parameters . 28 B.4.2 Feature Download Message Parameters . 28 B.5 Call Processing Control and Transmissions 28 B.5.1 Connections . 28 B.5.2 Class of Service . 28 B.5.3 Charge treatment 28 B.5.4 Common Channel Signalling . 28 B.5.5 Transmission 28 B.6 Adm

26、inistration (not applicable) . 29 B.6.1 Services Changes to the BCC 29 B.6.2 Service Changes to the Customer . 29 B.6.3 Installation and Support . 29 B.6.4 Craftsperson/SPCS Interface 29 B . 7 Performance and reliability 29 B.8 Maintenance . 29 B.9 Limitations and restrictions 29 B.10 Timing and tol

27、erances 29 Appendix A: DTMF Tones 30 Appendix B: Encoding of 8-bit characters in DTMF signals . 30 Appendix C: AcknowledgeDiegative Acknowledge signals . 30 Appendix D: Soft Key Return String Format . 30 Appendix E: Additional Guidelines for Host Computer Servers 30 Appendix F: Message Flow Scenario

28、s of a typical ASDI SDC Session . 30 Annex C (informative): Network Tones and Ringing signais 31 History 45 ETSI 7 ES 201 071 V1.1.2 (1998-10) Intellectual Property Rights PRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to the

29、se essential PRs, if any, is publicly available for ETSI members and non-members, and can be found in SR o00 3 14: “Intellectual Propeq Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards”, which is available free of charge from the ETSI Secretariat

30、. Latest updates are available on the ETSI Web server (http:/www.etsi.org/ipr). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in SR O00 314 (or the updates on the ETS

31、I Web server) which are, or may be, or may become, essential to the present document. Foreword This ETSI Standard (ES) has been produced by ETSI Project Analogue Terminals and Access (ATA). EN 301 071-1 version 1.1.1 was previously sent on Public Enquiry PE 9746. As a result of comments received dur

32、ing Public Enquiry it was agreed within the Technical Body to change the deliverable type to an ETSI Standard. A Technical Specification; TS 101 071 has also been published by ETSI. EN 301 071-2 has been abandoned due to lack of support. I nt roduct ion The Server Display and Script Services protoco

33、l (SDSS) is the European equivalent of the Analogue Display Services Interface (ADSI) protocol. The SDSS protocol provides bi-directional data communication in an analogue environment between a TE and a Server. The Server may be external to the network or integral with the network. The protocol uses

34、 FRquency Shift Keying (FSK) signalling for downstream transmission of data and uses DTMF signalling for upstream transmission of data. There are many potential physical implementations of the TE and its user interfaces and it is not the intention of the present document to restrict the physical imp

35、lementation in any way. However, in order that any SDSS TE may interwork correctly with an SDSS Server, it is essential that all SDSS TE have some common features. This is provided by means of the concept of an abstract TE which is the functionality the Server assumes the TE to have in order to inte

36、rwork correctly and comprises a set of logical components that all physical SDSS TE provide. The abstract TE supports two applications: a) Server Display Control applications (interactive ADSI session with remote Server). b) Feature Download applications (advanced call management service ADSI script

37、 originating from the network - no Server interaction during session). ETSI 8 ES 201 071 V1.1.2 (1998-10) 1 Scope The present document specifies the requirements necessary to support Server Display and Script Services (SDSS) screenphone services. The requirements are intended to ensure correct inter

38、working between a TE and a SDSS Server using the core protocol defined in Bellcore ADSI specifications SR-INS-002461 5, TR-NWT-O1273 6, associated Bulletins 8 and 9 and Revision 1 13, but modified and extended to include European network signalling events and physical access requirements. The presen

39、t document is not written for regulatory purposes. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or

40、 non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. il ETS 300 659-1: “Public Switched Telephon

41、e Network (PSTN); Subscriber line protocol over the local loop for display (and related) services; Part 1: On hook data transmission“. ETS 300 778-1: “Public Switched Telephone Network (PSTN); Protocol over the local loop for display and related services; Terminal Equipment requirements; Part 1 : Of

42、f-line data transmission“. ETS 300 659-2: “Public Switched Telephone Network (PSTN); Subscriber line protocol over the local loop for display (and related) services: Part 2 Off-hook data transmission“. ETS 300 778-2: “Public Switched Telephone Network (i“); Protocol over the local loop for display a

43、nd related services; Terminal Equipment requirements; Part 2: On-line data transmission“. Bellcore SR-INS002461 : “Customer Premises Equipment Compatibility Considerations for ADSI, Issue 1“. Pl i31 41 VI 61 Bellcore TR-NWT-00 1273: “Generic requirements for an SPCS to Customer Premises Equipment Da

44、ta Interface for Analog Display Services“ Issue 1, December 1992 Bellcore SR-TSV-002476: “CPE Compatibility Considerations for the Voiceband Data Transmission Interface“. Issue 1, December 1992 Bellcore SPECIAL REPORT BULLETIN Nos. 1,2 and 3 for SR-INS-002461: “Customer Premises Equipment Compatibil

45、ity Considerations for ADSI“. Bellcore TECHNICAL REFERENCE BULLETIN Nos. 1,2 and 3 for TR-NWT-001273: “Generic requirements for an SPCS to Customer Premises Equipment Data Interface for Analog Display Services“. TBR 21 (1998): “Terminal Equipment (TE); Attachment requirements for pan-European approv

46、al for connection to the analogue Public Switched Telephone Networks (PSTNs) of TE (excluding TE supporting the voice telephony service) in which network addressing, if provided, is by means of Dual Tone Multi Frequency (DTMF) signalling“. 71 81 91 101 STD-ETSI ES 201 071-ENGL 1998 3400855 034LBBL 5

47、T2 W 9 ES 201 071 V1.1.2 (1 998-1 O) ETS 300 001: “Attachments to Public Switched Telephone Network (PSTN); General technical requirements for equipment connected to an analogue subscriber interface in the PSTN“. TR 101 041-1: “Human Factors (HF); European harmonization of network generated tones; P

48、art 1: A review and recommendations“. Bellcore TR-NWT-001273: “Generic Requirements for an SPCS to Customer Remises Equipment Data Interface for Analog Display Services“, Issue 1, Revision 1, June 95 Council Directive 73/23/EEC of 19 February 1973 on the harmonization of the laws of Member States re

49、lating to electrical equipment designed for use within certain voltage limits. Directive 98/13EC of the European Parliament and of the Council of 12 February 1998 relating to telecommunications terminal equipment and satellite earth station equipment, including the mutual recognition of their conformity. Bellcore documents can be purchased from: Bellcore Customer Relations 8 Corporate Place Room PYA - 3A184 Piscataway, NJ 08854-4156 U.S.A. Phone: +1 908 699 5800 Fax: +1 908 336 255912692 3 Definitions and abbreviations 3.1 Definitions For the pu