EN 14118-3-2003 en Reinforcement Specifications for textile glass mats (chopped strand and continuous filament mats) Part 3 Specific requirements《增强材料 纺织玻璃纤维毡片(切短玻璃丝和连续长丝毡片)规范 第3部分.pdf

《EN 14118-3-2003 en Reinforcement Specifications for textile glass mats (chopped strand and continuous filament mats) Part 3 Specific requirements《增强材料 纺织玻璃纤维毡片(切短玻璃丝和连续长丝毡片)规范 第3部分.pdf》由会员分享，可在线阅读，更多相关《EN 14118-3-2003 en Reinforcement Specifications for textile glass mats (chopped strand and continuous filament mats) Part 3 Specific requirements《增强材料 纺织玻璃纤维毡片(切短玻璃丝和连续长丝毡片)规范 第3部分.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 14118-3:2003 Reinforcement Specifications for textile glass mats (chopped strand and continuous filament mats) Part 3: Specific requirements The European Standard EN 14118-3:2003 has the status of a British Standard ICS 59.100.10 BS EN 14118-3:2003 This British Standard was pu

2、blished under the authority of the Standards Policy and Strategy Committee on 20 February 2003 BSI 20 February 2003 ISBN 0 580 41294 6 National foreword This British Standard is the official English language version of EN 14118-3:2003. Together with BS EN 14118-1:2003 and BS EN 14118-2:2003 this pub

3、lication supersedes BS 3496:1989 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PRI/42, Fibre reinforced thermosetting plastics and prepregs, which has the responsibility to: A list of organizations represented on this committee can be obtained on re

4、quest to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI

5、 Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirer

6、s to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This documen

7、t comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUR

8、OPENNE EUROPISCHENORM EN141183 February2003 ICS59.100.10 Englishversion ReinforcementSpecificationsfortextileglassmats(chopped strandandcontinuousfilamentmats)Part3:Specific requirements RenfortSpcificationsdesmatsdeverretextile(mats filscoupsetmatsfilscontinus)Partie3:Exigences spcifiques Verstrkun

9、gsprodukteSpezifikationfrTextilglasmatten (GlasseidenundEndlosmatten)Teil3:Besondere Anforderungen ThisEuropeanStandardwasapprovedbyCENon4December2002. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandar

10、dwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilit

11、yofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Sp

12、ain,Sweden,SwitzerlandandUn ited Kingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2003CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN141183:2003EEN14

13、1183:2003(E) 2 Contents page Foreword3 1 Scope 4 2 Normativereferences 4 3 Termsanddefinitions. .4 4 Typicalcommercialproducts . 4 5 Requirements .5 Bibliography 6EN141183:2003(E) 3 Foreword Thisdocument(EN141183:2003)hasbeenpreparedbyTechnicalCommitteeCEN/TC249“Plastics“,the secretariatofwhichishel

14、dbyIBN. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidenticaltextor byendorsement,atthelatestbyAugust2003,andconflictingnationalstandardsshallbewithdrawnatthelatestby August2003. ThisstandardisonepartofEN14118whichisstructuredasfollows: ReinforcementSpecificat

15、ionsfortextileglassmats(choppedstrandandcontinuousfilamentmats) Part1:Designation ReinforcementSpecificationsfortextileglassmats(choppedstrandandcontinuousfilamentmats) Part2:Methodsoftestandgeneralrequirements ReinforcementSpecificationsfortextileglassmats(choppedstrandandcontinuousfilamentmats) Pa

16、rt3:Specificrequirements AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark,Finland, France,Germany,Greece,Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norwa

17、y,Portugal, Slovakia,Spain,Sweden,SwitzerlandandtheUnitedKingdom.EN141183:2003(E) 4 1Scope ThisEuropeanStandardprovidesthetechnicalspecificationforchoppedstrandsandcontinuousfilamentsmats coveredbypart1. 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreference,provisionsfromot

18、herpublications.These normativereferencesarecitedattheappropriateplacesinthetextandthepublicationsarelistedhereafter.For datedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothisEuropean Standardonlywhenincorporatedinitbyamendmentsorrevision.Forundatedreferencesthelatested

19、itionofthe publicationreferredtoapplies(includingamendments). EN141182:2003, ReinforcementSpecificationsfortextileglassmats(choppedstrandandcontinuousfilament mats)Part2:Methodsoftestandgeneralrequirements ENISO472:2001,PlasticsVocabulary(ISO472:1999). ENISO1043, PlasticsSymbolsandabbreviatedterms.

20、ISO1887, TextileglassDeterminationofcombustiblemattercontent . ISO3342, TextileglassMatsDeterminationoftensilebreakingforce . ENISO3344 ,ReinforcementproductsDeterminationofmoisturecontent(ISO3344:1997) ISO3374, ReinforcementproductsMatsandfabricsDeterminationofmassperunitarea . ISO5025:1997, Reinfo

21、rcementproductsWovenfabricsDeterminationofwidthandlength. 3 Termsanddefinitions ForthepurposesofthisEuropeanStandard,thetermsanddefinitionsgiveninENISO472:2001andEN14118 2:2003apply. 4 Typicalcommercialproducts 4.1 Choppedstrandmats(CSM) Recommendedprocessorfinaluse Recommended matrixcompatibility T

22、ypicalmassperunit area Typicalwidth values Typicalwidth range (ENISO1043) (g/m 2 ) (cm) (cm) multipurpose UP,EP,UP(V) 225,300,375,450, 600 92,125;130 From10to320 specialpurpose UP,EP,UP(V) 80,100,150,225, 113,130 From10to320 (hightranslucency) 300,375,400,450, 500,600 contact(powderbound) UP,EP,UP(V

23、) 275,300,375,450, 600,750,900,1200 92,125,130; 153 From13to320 contact(emulsionbound) UP,PF 300,375,450,600, 900 91,92,95,125 From10to250 multipurposecement cementious 120 60,90,120 From10to180EN141183:2003(E) 5 4.2 Continuousfilamentmats(CFM) Recommendedprocess Recommendedresin compatibility Massp

24、erunitarea Typicalwidth values Typicalwidth ranges (ENISO1043) (g/cm 2 ) (cm) (cm) RTM UP,EP,UP(V),PU 225,300,450,600 130,170 From60to300 preforming UP,EP,UP(V),PU 225,300,450,600 130,170 From60to300 SRIM PU 225,300,450,600 130,170 From60to300 pultrusion UP,UP(V),PMMA 225,300,450,600 / From60to300 c

25、ontinuouslaminating UP,EP 300,450,600 / From60to300 multipurposecement cementious 100,150 byrequest byrequest 5Requirements 5.1 Controlledproperties Thefollowingtablegivesthetolerancestheproductshavetofallwithin;theindividual tolerancecorrespondtothe toleranceofatestresultvalueonthenominalvalueandth

26、emeantolerancecorrespondtothetoleranceoftheroll valueonthenominalvalue. NOTE Atestresultvalueisobtainedhavingcompletedatestmethodwhichmayneedseveralmeasurements(test specimens)duetothevariabilityofthemethoditself.Thenthetestresultvalueisthemeanofthesemeasurements. Property Testmethod IndividualToler

27、ance MeanTolerance Massperunitarea choppedstrandmats ISO3374 20% 12% continuousfilamentmats 20% 16% Combustiblematter choppedstrandsmats ISO1887 40% 31% continuousfilamentmats 40% 32% Tensilestrength minimumvalue: / choppedstrandmats ISO3342 60%ofthenominal Moisturecontent ENISO3344 maximumvalue:0,5

28、% / Width(2sidestrimmed) ISO5025 0,5cmor+3cm0cm / Width(1sidetrimmedornottrimmed) annexAof ISO5025:1997 3cm / 5.2 Visualproperties Arollisconsideredoutofconformitywhenthemaximumnumberofdefectsfor100m 2 ishigherthantheagreed one(typically5to10,dependingontheproduct)andthetelescopingexceeds5cmofthewid

29、thoftheroll .EN141183:2003(E) 6 Bibliography ISO291, PlasticsStandardatmospheresforconditioningandtesting.blankBS EN 14118-3:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents t

30、he UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to i

31、mprove the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 90

32、00. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Ser

33、vices. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standar

34、ds, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on al

35、l its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and

36、other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI webs

37、ite at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retri

38、eval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.