ECMA 304-2001 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Wireless Terminal Call Handling Additional Network Features (2nd Edition)《专用综合业务网络(P.pdf

《ECMA 304-2001 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Wireless Terminal Call Handling Additional Network Features (2nd Edition)《专用综合业务网络(P.pdf》由会员分享，可在线阅读，更多相关《ECMA 304-2001 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Wireless Terminal Call Handling Additional Network Features (2nd Edition)《专用综合业务网络(P.pdf（66页珍藏版）》请在麦多课文档分享上搜索。

1、 Standard ECMA-304 2nd Edition - December 2001 Standardizing Information and Communication Systems Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Wireless Terminal Call Handling Additional Network Features Phone: +41 22 849.60.00 - Fax: +41 22 849.60.01 - URL: http

2、:/www.ecma.ch - Internet: helpdeskecma.ch . Standard ECMA-304 2nd Edition - December 2001 Standardizing Information and Communication Systems Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Wireless Terminal Call Handling Additional Network Features (QSIG-WTMCH) Pho

3、ne: +41 22 849.60.00 - Fax: +41 22 849.60.01 - URL: http:/www.ecma.ch - Internet: helpdeskecma.ch IW Ecma-304.doc 15-01-02 08,50 . Brief History This Standard is one of a series of ECMA Standards defining Wireless Terminal Mobility (WTM) services and signalling protocols applicable to Private Integr

4、ated Services Networks (PISNs). The series uses ISDN concepts as developed by ITU-T and conforms to the framework of International Standards for Open Systems Interconnection as defined by ISO/IEC. This particular Standard specifies the signalling protocol for use at the Q reference point in support

5、of the Wireless Terminal Call Handling additional network feature. The protocol defined in this Standard forms part of the PSS1 protocol (informally known as QSIG). This Standard is based upon the practical experience of ECMA member companies and the results of their active and continuous participat

6、ion in the work of ISO/IEC JTC1, ITU-T, ETSI and other international and national standardization bodies. It represents a pragmatic and widely based consensus. Compared to the 1st edition of Standard ECMA-304 (published by ECMA in June 2000), this 2nd Edition incorporates migration to ASN.1 version

7、1997. Adopted as 2nd Edition of Standard ECMA-304 by the General Assembly of December 2001. . - i - Table of contents 1 Scope 1 2 Conformance 1 3 References (normative) 1 4 Terms and definitions 2 4.1 External definitions 2 4.2 Other definitions 3 4.2.1 Alternative identifier 3 4.2.2 Home data base

8、(HDB) 3 4.2.3 Home PINX 3 4.2.4 Rerouteing PINX 3 4.2.5 Visitor data base (VDB) 3 4.2.6 Visitor PINX 3 4.2.7 WTMI-detect PINX 4 5 Symbols and abbreviated terms 4 6 Signalling protocol for the support of ANF-WTMI 4 6.1 ANF-WTMI description 4 6.2 ANF-WTMI operational requirements 5 6.2.1 Requirements

9、on the Rerouteing PINX 5 6.2.2 Requirements on the WTMI-detect PINX 5 6.2.3 Requirements on the Home PINX 5 6.2.4 Requirements on the Visitor PINX 5 6.2.5 Requirements on a Transit PINX 5 6.3 ANF-WTMI coding requirements 6 6.3.1 Operations 6 6.3.2 Information elements 9 6.3.3 Messages 9 6.4 ANF-WTMI

10、 state definitions 9 6.4.1 States at the Rerouteing PINX 9 6.4.2 States at the WTMI-detect PINX 9 6.4.3 States at the Home PINX 9 6.4.4 States at the Visitor PINX 9 6.5 ANF-WTMI signalling procedures for invocation and operation 10 6.5.1 Actions at the Rerouteing PINX 10 6.5.2 Actions at the WTMI-de

11、tect PINX 10 6.5.3 Actions at the Home PINX 12 6.5.4 Actions at the Visitor PINX 13 6.5.5 Actions at a Transit PINX 13 6.5.6 Actions at an Originating PINX 13 - ii - 6.6 ANF-WTMI impact of interworking with public ISDNs 13 6.7 ANF-WTMI impact of interworking with non-ISDNs 13 6.8 Protocol interactio

12、ns between ANF-WTMI and other supplementary services and ANFs 13 6.8.1 Interaction with Calling Name Identification Presentation (SS-CNIP) 13 6.8.2 Interaction with Connected Name Identification Presentation (SS-CONP) 14 6.8.3 Interaction with Call Completion to Busy Subscriber (SS-CCBS) 14 6.8.4 In

13、teraction with Call Completion on No Reply (SS-CCNR) 14 6.8.5 Interaction with Call Transfer (SS-CT) 14 6.8.6 Interaction with Call Forwarding Unconditional (SS-CFU) 14 6.8.7 Interaction with Call Forwarding Busy (SS-CFB) 14 6.8.8 Interaction with Call Forwarding No Reply (SS-CFNR) 14 6.8.9 Interact

14、ion with Call Deflection (SS-CD) 14 6.8.10 Interaction with Path Replacement (ANF-PR) 14 6.8.11 Interaction with Call Offer (SS-CO) 14 6.8.12 Interaction with Call Intrusion (SS-CI) 14 6.8.13 Interaction with Do Not Disturb (SS-DND) 15 6.8.14 Interaction with Do Not Disturb Override (SS-DNDO) 15 6.8

15、.15 Interaction with Advice Of Charge (SS-AOC) 15 6.8.16 Interaction with Recall (SS-RE) 15 6.8.17 Interaction with Call Interception (ANF-CINT) 15 6.8.18 Interaction with Transit Counter (ANF-TC) 15 6.8.19 Interaction with Route Restriction Class (ANF-RRC) 15 6.8.20 Interaction with Message Waiting

16、 Indication (SS-MWI) 15 6.8.21 Interaction with Wireless Terminal Location Registration (SS-WTLR) 16 6.8.22 Interaction with Wireless Terminal Information (ANF-WTINFO) 16 6.8.23 Interaction with Wireless Terminal Outgoing Call (ANF-WTMO) 16 6.8.24 Interaction with Wireless Terminal Authentication of

17、 the Terminal (SS-WTAT) 16 6.8.25 Interaction with Wireless Terminal Authentication of the Network (SS-WTAN) 16 6.9 ANF-WTMI parameter values (timers) 16 6.9.1 Timer T1 16 6.9.2 Timer T2 17 7 Signalling protocol for the support of ANF-WTMO 17 7.1 ANF-WTMO description 17 7.2 ANF-WTMO operational requ

18、irements 17 7.2.1 Requirements on the Originating PINX 17 7.2.2 Requirements on the Home PINX 17 7.2.3 Requirements on a Transit PINX 17 7.3 ANF-WTMO coding requirements 17 7.3.1 Operations 17 7.3.2 Information elements 17 7.3.3 Messages 18 7.4 ANF-WTMO state definitions 18 7.4.1 States at the Origi

19、nating PINX 18 7.4.2 States at the Home PINX 18 - iii - 7.5 ANF-WTMO signalling procedures 18 7.5.1 Actions at the Originating PINX 18 7.5.2 Actions at the Home PINX 18 7.5.3 Actions at the Transit PINX 19 7.6 ANF-WTMO impact of interworking with public ISDNs 19 7.7 ANF-WTMO impact of interworking w

20、ith non-ISDNs 19 7.8 Protocol interactions between ANF-WTMO and other supplementary services and ANFs 19 7.8.1 Interaction with Calling Name Identification Presentation (SS-CNIP) 20 7.8.2 Interaction with Connected Name Identification Presentation (SS-CONP) 20 7.8.3 Interaction with Call Completion

21、to Busy Subscriber (SS-CCBS) 20 7.8.4 Interaction with Call Completion on No Reply (SS-CCNR) 20 7.8.5 Interaction with Call Transfer (SS-CT) 20 7.8.6 Interaction with Call Diversion (SS-CFU, SS-CFB, SS-CFNR, SS-CD) 20 7.8.7 Interaction with Path Replacement (ANF-PR) 20 7.8.8 Interaction with Call Of

22、fer (SS-CO) 20 7.8.9 Interaction with Call Intrusion (SS-CI) 20 7.8.10 Interaction with Do Not Disturb (SS-DND) 20 7.8.11 Interaction with Do Not Disturb Override (SS-DNDO) 20 7.8.12 Interaction with Advice of Charge (SS-AOC) 20 7.8.13 Interaction with Recall (SS-RE) 20 7.8.14 Interaction with Call

23、Interception (ANF-CINT) 20 7.8.15 Interaction with Transit Counter (ANF-TC) 20 7.8.16 Interaction with Route Restriction Class (ANF-RRC) 21 7.8.17 Interaction with Message Waiting Indication (SS-MWI) 21 7.8.18 Interaction with Wireless Terminal Location Registration (SS-WTLR) 21 7.8.19 Interaction w

24、ith Wireless Terminal Information (ANF-WTINFO) 21 7.8.20 Interaction with Wireless Terminal Incoming Call (ANF-WTMI) 21 7.8.21 Interaction with Wireless Terminal Authentication of the Terminal (SS-WTAT) 21 7.8.22 Interaction with Wireless Terminal Authentication of the Network (SS-WTAN) 21 7.9 Param

25、eter values (timers) 21 7.9.1 Timers at the Originating PINX 21 7.9.2 Timers at the Home PINX 21 Annex A - Protocol Implementation Conformance Statement (PICS) proforma 23 Annex B - Imported ASN.1 definitions 33 Annex C - Examples of Message Sequences 35 Annex D - Specification and Description Langu

26、age (SDL) representation of procedures 41 Annex E - ASN.1 definitions according to ITU-T Recs. X.208 / X.209 49 - iv - . 1 Scope This Standard specifies the signalling protocol for the support of the Wireless terminal call handling additional network features (ANF-WTMI and ANF-WTMO) at the Q referen

27、ce point between Private Integrated services Network eXchanges (PINX) connected together within a Private Integrated Services Network (PISN). ANF-WTMI is a feature that directs incoming calls to a WTMI user within the PISN regardless of the WTMI users geographical location within the PISN, provided

28、that the WTMI users location is known. Roaming outside the PISN is outside the scope of this edition of this Standard. ANF-WTMO permits the PISN to process call requests from a WTMO user at the home location, if required. The Q reference point is defined in ECMA-133. Service specifications are produ

29、ced in three stages and according to the method specified in ITU-T Rec. I.130. This Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ECMA-303. The signalling protocol for ANF-WTMI and ANF-WTMO

30、 operates on top of the signalling protocol for basic circuit switched call control, as specified in ECMA-143, and uses certain aspects of the generic procedures for the control of supplementary services specified in ECMA-165. This Standard also specifies additional signalling protocol requirements

31、for the support of interactions at the Q reference point between ANF-WTMI / ANF-WTMO and other supplementary services and ANFs. This Standard is applicable to PINXs which can interconnect to form a PISN. 2 Conformance In order to conform to this Standard, a PINX shall satisfy the requirements identi

32、fied in the Protocol Implementation Conformance Statement (PICS) proforma in annex A. 3 References (normative) The following standards contain provisions which, through reference in this text, constitute provisions of this Standard. All standards are subject to revision, and parties to agreements ba

33、sed on this Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. In the case of references to ECMA Standards that are aligned with ISO/IEC International Standards, the number of the appropriate ISO/IEC International Standard is

34、 given in brackets after the ECMA reference. ECMA-133 Private Integrated Services Network (PISN) - Reference Configuration for PISN Exchanges (PINX) (International Standard ISO/IEC 11579-1) ECMA-142 Private Integrated Services Network (PISN) - Circuit Mode 64kbit/s Bearer Services - Service Descript

35、ion, Functional Capabilities and Information Flows (International Standard ISO/IEC 11574) ECMA-143 Private Integrated Services Network (PISN) - Circuit Mode Bearer Services - Inter-Exchange Signalling Procedures and Protocol (International Standard ISO/IEC 11572) ECMA-155 Private Integrated Services

36、 Networks - Addressing (International Standard ISO/IEC 11571) ECMA-164 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Name Identification Supplementary Services (International Standard ISO/IEC 13868) ECMA-165 Private Integrated Services Network (PISN) - Generic Fun

37、ctional Protocol for the Support of Supplementary Services - Inter-Exchange Signalling Procedures and Protocol (International Standard ISO/IEC 11582) - 2 - ECMA-174 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Call Diversion Supplementary Services (International

38、Standard ISO/IEC 13873) ECMA-176 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Path Replacement Additional Network Feature (International Standard ISO/IEC 13874) ECMA-192 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Call Offer

39、Supplementary Service (International Standard ISO/IEC 14843) ECMA-194 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Do Not Disturb and Do Not Disturb Override Supplementary Services (International Standard ISO/IEC 14844) ECMA-203 Private Integrated Services Networ

40、k (PISN) - Inter-Exchange Signalling Protocol - Call Intrusion Supplementary Service (International Standard ISO/IEC 14846) ECMA-212 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Advice of Charge Supplementary Services (International Standard ISO/IEC 15050) ECMA-2

41、21 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Call Interception Additional Network Feature (International Standard ISO/IEC 15054) ECMA-225 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Transit Counter Additional Network Featu

42、re (International Standard ISO/IEC 15056) ECMA-242 Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Message Waiting Indication Supplementary Service (International Standard ISO/IEC 15506) ECMA-303 Private Integrated Services Network (PISN) - Specification, Functional

43、 Model and Information Flows - Wireless Terminal Call Handling Additional Network Features (International Standard ISO/IEC 15430) ISO/IEC 13241 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Inter-exchange signalling proto

44、col - Route Restriction Class additional network feature (1997) ITU-T Rec. I.112 Vocabulary of terms for ISDNs (1993) ITU-T Rec. I.130 Method for the characterization of telecommunication services supported by an ISDN and network capabilities of an ISDN (Blue Book) (1988) ITU-T Rec. I.210 Principles

45、 of telecommunication services supported by an ISDN and the means to describe them (1993) ITU-T Rec. Q.850 Usage of cause and location in the digital subscriber signalling system No. 1 and the signalling system No. 7 ISDN user part (1993) ITU-T Rec. Q.950 Supplementary services protocols, structure

46、and general principles (2000) ITU-T Rec. Z.100 Specification and description language (1999) 4 Terms and definitions For the purposes of this Standard, the following definitions apply. 4.1 External definitions This Standard uses the following terms defined in other documents: Additional Network Feat

47、ure (ANF) (ECMA-165) Application Protocol Data Unit (APDU) (ECMA-165) Basic service (ITU-T Rec. I.210) Call, Basic call (ECMA-165) Call independent (ECMA-165) - 3 - Call independent signalling connection (ECMA-165) Call related (ECMA-165) Complete number (ECMA-155) Co-ordination function (ECMA-165)

48、End PINX (ECMA-165) Incoming Gateway PINX (ECMA-143) Incoming WTM call (ECMA-303) Interpretation APDU (ECMA-165) Network Facility Extension (NFE) (ECMA-165) Originating PINX (ECMA-143) Private Integrated Services Network (PISN) (ECMA-133) Private Integrated services Network eXchange (PINX) (ECMA-133

49、) PISN number (ECMA-155) Signalling (ITU-T Rec. I.112) Supplementary service (ITU-T Rec. I.210) Supplementary Service Control Entity (ECMA-165) Subsequent PINX (ECMA-143) Terminating PINX (ECMA-143) Transit PINX (ECMA-143) User (ECMA-142) WTMI user (ECMA-303) WTMO user (ECMA-303) 4.2 Other definitions 4.2.1 Alternative identifier An identifier, other than the PISN number, which identifies the WTMI user uniquely. 4.2.2 Home data base (HDB) The data base in which the current location and all associated parameters of a wireless termina