ECA EIA-60384-17-2014 Fixed Capacitors for Use in Electronic Equipment - Part 17 Sectional Specification - Fixed Metallized Polypropylene Film Dielectric a c and Pulse Capacitors.pdf
《ECA EIA-60384-17-2014 Fixed Capacitors for Use in Electronic Equipment - Part 17 Sectional Specification - Fixed Metallized Polypropylene Film Dielectric a c and Pulse Capacitors.pdf》由会员分享,可在线阅读,更多相关《ECA EIA-60384-17-2014 Fixed Capacitors for Use in Electronic Equipment - Part 17 Sectional Specification - Fixed Metallized Polypropylene Film Dielectric a c and Pulse Capacitors.pdf(35页珍藏版)》请在麦多课文档分享上搜索。
1、 EIA STANDARD Fixed Capacitors for Use in Electronic Equipment Part 17: Sectional Specification Fixed Metallized Polypropylene Film Dielectric a.c. and Pulse CapacitorsEIA-60384-17 (IEC 60384-17:2005, IDT) October 2014 ANSI/EIA-60384-17-2014 Approved: October 10, 2014 EIA-60384-17 NOTICE EIA Enginee
2、ring Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper prod
3、uct for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of ECIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude th
4、eir voluntary use by those other than ECIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by ECIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, ECIA does not assume any li
5、ability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This EIA Standard is identical (IDT) with the International Standard IEC Publication 60384-17:2005: Fixed Capacitors for Use in Electronic Equipment Part 17: Sectional Specificati
6、on . Fixed Metallized Polypropylene Film Dielectric a.c. and Pulse Capacitors. This document is the EIA Standard EIA-60384-17 2014 Edition 2: Fixed Capacitors for Use in Electronic Equipment Part 17: Sectional Specification Fixed Metallized Polypropylene Film Dielectric a.c. and Pulse Capacitors. Th
7、e text, figures and tables of IEC 60384-17:2005 are used in this Standard with the consent of the IEC and the American National Standards Institute (ANSI). These materials are subject to copyright claims of IEC and ECIA. No part of this publication may be reproduced in any form, including an electro
8、nic retrieval system, without the prior written permission of ECIA. All requests pertaining to EIA-60384-17 2014 Edition 2: Fixed Capacitors for Use in Electronic Equipment Part 17: Sectional Specification Fixed Metallized Polypropylene Film Dielectric a.c. and Pulse Capacitors should be submitted t
9、o ECIA at the address below. The IEC copyrighted material has been reproduced with permission from ANSI. The IEC Foreword and Introduction are not part of the requirements of this standard but are included for information purposes only. This Standard does not purport to address all safety problems a
10、ssociated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 5276, formulated unde
11、r the cognizance of the P-2.2 Committee on EIA Paper, Film, Mica any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC co
12、llaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinio
13、n on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ens
14、ure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently t
15、o the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered
16、responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its te
17、chnical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other I
18、EC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the sub
19、ject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384-17 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This second edition cancels and replaces the first edition p
20、ublished in 1987 and constitutes minor revisions related to tables, figures and references. The text of this standard is based on the following documents: FDIS Report on voting40/1597/FDIS 40/1630/RVD Full information on the voting for the approval of this standard can be found in the report on voti
21、ng indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. EIA-60384-17 Page 2 IEC 60384 consists of the following parts, under the (new) general title Fixed capacitors for use in electronic equipment: Part 1: Generic specification Part 2: S
22、ectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors Part 3: Sectional specification: Fixed tantalum chip capacitors Part 4: Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte Part 5: Sectional specification:
23、 Fixed mica dielectric d.c. capacitors with a rated voltage not exceeding 3000 V Selection of methods of test and general requirements Part 6: Sectional specification: Fixed metallized polycarbonate film dielectric d.c. capacitors Part 7: Sectional specification: Fixed polystyrene film dielectric me
24、tal foil d.c. capacitors Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2 Part 11: Sectional specification: Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors Par
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ECAEIA60384172014FIXEDCAPACITORSFORUSEINELECTRONICEQUIPMENTPART17SECTIONALSPECIFICATIONFIXEDMETALLIZEDPOLYPROPYLENEFILMDIELECTRICACANDPULSECAPACITORSPDF
![提示](http://www.mydoc123.com/images/bang_tan.gif)
链接地址:http://www.mydoc123.com/p-704429.html