DIN EN ISO 18276-2017 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276 201.pdf

《DIN EN ISO 18276-2017 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276 201.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 18276-2017 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276 201.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、July 2017 English price group 15No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 25.160.20!%h8a“2692162www.din.deDIN

2、 EN ISO 18276Welding consumables Tubular cored electrodes for gasshielded and nongasshielded metal arc welding of high strength steels Classification (ISO 18276:2017);English version EN ISO 18276:2017,English translation of DIN EN ISO 18276:2017-07Schweizustze Flldrahtelektroden zum MetallLichtbogen

3、schweien mit und ohne Schutzgas von hochfesten Sthlen Einteilung (ISO 18276:2017);Englische Fassung EN ISO 18276:2017,Englische bersetzung von DIN EN ISO 18276:2017-07Produits consommables pour le soudage Filslectrodes fourrs pour le soudage larc avec ou sans gaz de protection des aciers haute rsist

4、ance Classification (ISO 18276:2017);Version anglaise EN ISO 18276:2017,Traduction anglaise de DIN EN ISO 18276:2017-07SupersedesDIN EN ISO 18276:200609www.beuth.deDocument comprises 32 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authori

5、tative.07.17 DIN EN ISO 18276:2017-07 2 A comma is used as the decimal marker. National foreword This document (EN ISO 18276:2017) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes” (Secretariat: AFNOR, France) in collaboration with Technical Committee CEN/TC 121 “Weld

6、ing and allied processes” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Schweien und verwandte Verfahren (DIN Standards Committee Welding and Allied Processes), Working Committee NA 092-00-03 AA “Welding consumables (DVS AG W 5)”. The DI

7、N Standards corresponding to the International Standards referred to in this document are as follows: ISO 544 DIN EN ISO 544 ISO 3690 DIN EN ISO 3690 ISO 6847 DIN EN ISO 6847 ISO 6947 DIN EN ISO 6947 ISO 13916 DIN EN ISO 13916 ISO 14175 DIN EN ISO 14175 ISO 14344 DIN EN ISO 14344 ISO 15792-1:2000/Am

8、d 1:2011 DIN EN ISO 15792-1:2012-01 ISO 80000-1:2009/Cor 1:2011 DIN EN ISO 80000-1:2013-08 Amendments This standard differs from DIN EN ISO 18276:2006-09 as follows: a) the content has been aligned with ISO 17632:2015 and ISO 17634:2015; b) normative references have been updated and a bibliography h

9、as been included; c) shielding gas designations have been updated; d) Table 3B has been extensively revised to align with existing Pacific Rim designations; e) new alloys have been included in Table 3B; f) the T4 designator has been deleted from Table 4B; g) heat input ranges given in Table 8B have

10、been modified to match current Pacific Rim values; h) the fillet weld test has been removed; i) an example using the Z designation has been included in Clause 11A; j) the standard has been editorially revised and harmonized with current rules of presentation. Previous editions DIN EN 12535: 2000-04

11、DIN EN ISO 18276: 2006-09 DIN EN ISO 18276:2017-07 3 National Annex NA (informative) Bibliography DIN EN ISO 544, Welding consumables Technical delivery conditions for filler materials and fluxes Type of product, dimensions, tolerances and markings DIN EN ISO 3690, Welding and allied processes Deter

12、mination of hydrogen content in arc weld metal DIN EN ISO 6847, Welding consumables Deposition of a weld metal pad for chemical analysis DIN EN ISO 6947, Welding and allied processes Welding positions DIN EN ISO 13916, Welding Guidance on the measurement of preheating temperature, interpass temperat

13、ure and preheat maintenance temperature DIN EN ISO 14175, Welding consumables Gases and gas mixtures for fusion welding and allied processes DIN EN ISO 14344, Welding consumables Procurement of filler materials and fluxes DIN EN ISO 15792-1:2012-01, Welding consumables Test methods Part 1: Test meth

14、ods for all-weld metal test specimens in steel, nickel and nickel alloys (ISO 15792-1:2000 + Amd 1:2011) DIN EN ISO 80000-1:2013-08, Quantities and units Part 1: General (ISO 80000-1:2009 + Cor 1:2011) DIN EN ISO 18276:2017-07 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EURO

15、PISCHE NORM EN ISO 18276 April 2017 ICS 25.160.20 Supersedes EN ISO 18276:2006English Version Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017) Produits consommables pour le soudage - Fils-

16、lectrodes fourrs pour le soudage larc avec ou sans gaz de protection des aciers haute rsistance - Classification (ISO 18276:2017) Schweizustze - Flldrahtelektroden zum Metall-Lichtbogenschweien mit und ohne Schutzgas von hochfesten Sthlen - Einteilung (ISO 18276:2017) This European Standard was appr

17、oved by CEN on 29 March 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

18、standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language a

19、nd notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hung

20、ary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG

21、CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 18276:2017 EEuropean foreword .3Introduction 51 Scope . 62 Normative references 63 Terms and definitions . 74

22、 Classification 75 Symbols and requirements 85.1 Symbol for the product/process 85.2 Symbol for tensile properties of all-weld metal . 95.3 Symbol for impact properties of all-weld metal . 95.4 Symbol for chemical composition of all-weld metal 105.5 Symbol for type of electrode core or the usability

23、 characteristics of the electrodes 135.6 Symbol for shielding gas 145.7 Symbol for welding position 145.8 Symbol for hydrogen content of deposited metal 145.9 Symbol for conditions of post-weld heat treatment 156 Rounding procedure 157 Mechanical tests .157.1 Preheating and interpass temperatures 15

24、7.2 Pass sequence . 167.3 Post-weld heat treatment (PWHT) condition .178 Chemical analysis 179 Retesting 1710 Technical delivery conditions 1711 Examples of designations .17Annex A (informative) Classification systems 20Annex B (informative) Description of composition designations for electrodes in

25、the classification system based upon tensile strength and average impact energy of 27 J 23Annex C (informative) Description of types of electrode core in the classification system based upon yield strength and average impact energy of 47 J 24Annex D (informative) Descriptions of types of usability c

26、haracteristics in the classification system based upon tensile strength and average impact energy of 27 J .25Annex E (informative) Notes on hydrogen content .27Bibliography .28Contents PageDIN EN ISO 18276:2017-07 EN ISO 18276:2017 (E) 2Foreword .4European foreword This document (EN ISO 18276:2017)

27、has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publicatio

28、n of an identical text or by endorsement, at the latest by October 2017, and conflicting national standards shall be withdrawn at the latest by October 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall

29、 not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 18276:2006. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulg

30、aria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzer

31、land, Turkey and the United Kingdom. Endorsement notice The text of ISO 18276:2017 has been approved by CEN as EN ISO 18276:2017 without any modification. DIN EN ISO 18276:2017-07 EN ISO 18276:2017 (E) 3 ForewordISO (the International Organization for Standardization) is a worldwide federation of na

32、tional standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Intern

33、ational organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those inten

34、ded for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www

35、.iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document

36、 will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and e

37、xpressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 44, We

38、lding and allied processes, Subcommittee SC 3, Welding consumables.This second edition cancels and replaces the first edition (ISO 18276:2005), which has been technically revised with the following changes: content has been aligned with ISO 17632:2015 and ISO 17634:2015; shielding gas designations h

39、ave been updated; Table 3B has been extensively revised to align with existing Pacific Rim designations; new designations have been added to Table 3B; the T4 designator has been deleted from Table 4B; heat input ranges given in Table 8B have been modified to match current Pacific Rim values; fillet

40、weld tests have been removed; an example using the Z designation has been added to Clause 11A.Requests for official interpretations of any aspect of this document should be directed to the Secretariat of ISO/TC 44/SC 3 via your national standards body. A complete listing of these bodies can be found

41、 at www .iso .org.DIN EN ISO 18276:2017-07 EN ISO 18276:2017 (E) 4 IntroductionThis document proposes a classification system for tubular cored electrodes in terms of the tensile properties, impact properties, chemical composition of the all-weld metal, type of electrode core, shielding gas and weld

42、ing position. The ratio of yield strength to tensile strength of the weld metal is generally higher than that of the parent metal. Note that matching weld metal yield strength to parent metal yield strength will not necessarily ensure that the weld metal tensile strength matches that of the parent m

43、etal. Where the application requires matching tensile strength, therefore, selection of the consumable should be made by reference to column 3 of Table 1A or Table 1B.Note that the mechanical properties of all-weld metal test specimens used to classify tubular cored electrodes will differ from those

44、 obtained with production joints because of differences in welding procedure such as electrode size, width of weave, welding position and parent metal composition.The classification in accordance with system A is mainly based on EN 125351. The classification in accordance with system B is mainly bas

45、ed upon standards used around the Pacific Rim.DIN EN ISO 18276:2017-07 EN ISO 18276:2017 (E) 5 1 ScopeThis document specifies the requirements for classification of tubular cored electrodes with or without a gas shield for metal arc welding of high-strength steels in the as-welded condition or in th

46、e post-weld heat-treated condition with a minimum yield strength higher than 550 MPa or a minimum tensile strength higher than 590 MPa. One tubular cored electrode can be tested and classified with different shielding gases, if used with more than one.This document is a combined specification provid

47、ing classification utilizing a system based upon the yield strength and an average impact energy of 47 J of the all-weld metal, or utilizing a system based upon the tensile strength and an average impact energy of 27 J of the all-weld metal. Subclauses and tables which carry the suffix letter “A” ar

48、e applicable only to tubular cored electrodes classified under the system based upon the yield strength and an average impact energy of 47 J of the all-weld metal given in this document. Subclauses and tables which carry the suffix letter “B” are applicable only to tubular cored electrodes classified under the system based upon the tensile strength and an average impact energy of 27 J of the all-weld metal given in this document. Subclauses and tables which do not have either the suffix