DIN EN ISO 16773-1-2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 1 Terms and definitions (ISO 16773-1 2016) German version EN I.pdf

《DIN EN ISO 16773-1-2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 1 Terms and definitions (ISO 16773-1 2016) German version EN I.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 16773-1-2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 1 Terms and definitions (ISO 16773-1 2016) German version EN I.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、December 2016 English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 87.040!%V*“2595107www.din.deDIN

2、 EN ISO 16773-1Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens Part 1: Terms and definitions (ISO 167731:2016);English version EN ISO 167731:2016,English translation of DIN EN ISO 16773-1:2016-12Elektrochemische Impedanzspektroskopie (EIS) an beschichteten und

3、unbeschichteten metallischen Proben Teil 1: Begriffe (ISO 167731:2016);Englische Fassung EN ISO 167731:2016,Englische bersetzung von DIN EN ISO 16773-1:2016-12Spectroscopie dimpdance lectrochimique (SIE) sur des prouvettes mtalliques revtues etnon revtues Partie 1: Termes et dfinitions (ISO 167731:2

4、016);Version anglaise EN ISO 167731:2016,Traduction anglaise de DIN EN ISO 16773-1:2016-12SupersedesDIN EN ISO 167731:200707www.beuth.deDocument comprises 16 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.11.16 DIN EN ISO 1677

5、3-1:2016-12 2 A comma is used as the decimal marker. National foreword This document (EN ISO 16773-1:2016) has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes”, Subcommittee SC 9 “General test methods for paints and varnishes” (Secretariat: BSI, United Kingdom) in collaboration

6、with Technical Committee CEN/TC 139 “Paints and varnishes” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Beschichtungsstoffe und Beschichtungen (DIN Standards Committee Coatings and Coating Materials), Working Committee NA 002-00-07 AA A

7、llgemeine Prfverfahren fr Beschichtungsstoffe und Beschichtungen, Working Group NA 002-00-07-17 AK Elektrochemische Methoden. DIN EN ISO 16773 consists of the following parts, under the general title Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens: Part 1: Term

8、s and definitions Part 2: Collection of data Part 3: Processing and analysis of data from dummy cells Part 4: Examples of spectra of polymer-coated and uncoated specimens The DIN Standard corresponding to the International Standard referred to in this document is as follows: ISO 4618:2014 DIN EN ISO

9、 4618:2015-01 Amendments This standard differs from DIN EN ISO 16773-1:2007-07 as follows: a) the introductory element of the title, Paints and varnishes, has been omitted since the scope has been extended to include metals and metal alloys, and the main element of the title has been changed to: Ele

10、ctrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens; b) a reference to ISO/TR 16208 has been added; c) the terms are now listed in alphabetical order; d) the definition of “working electrode” has been taken from ISO/TR 16208; e) units and symbols have been added, wher

11、e appropriate. Previous editions DIN EN ISO 16773-1: 2007-07 DIN EN ISO 16773-1:2016-12 3 National Annex NA (informative) Bibliography DIN EN ISO 4618:2015-01, Paints and varnishes Terms and definitions (ISO 4618:2014) DIN EN ISO 16773-1:2016-12 4 This page is intentionally blank EUROPEAN STANDARD N

12、ORME EUROPENNE EUROPISCHE NORM EN ISO 16773-1 April 2016 ICS 87.040 Supersedes EN ISO 16773-1:2007English Version Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 1: Terms and definitions (ISO 16773-1:2016) Spectroscopie dimpdance lectrochimique (SIE) sur

13、 des prouvettes mtalliques revtues et non revtues -Partie 1: Termes et dfinitions (ISO 16773-1:2016) Elektrochemische Impedanzspektroskopie (EIS) an beschichteten und unbeschichteten metallischen Proben - Teil 1: Begriffe (ISO 16773-1:2016) This European Standard was approved by CEN on 11 March 2016

14、. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on

15、 application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENEL

16、EC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy

17、, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue

18、 Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 16773-1:2016 EEuropean foreword .3Introduction 51 Scope . 62 Terms and definitions . 6Bibliography . 12Contents PageDIN EN ISO 16773-1:2016-12 EN

19、ISO 16773-1:2016 (E) 2Foreword .4European foreword This document (EN ISO 16773-1:2016) has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN. This European Standard

20、 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2016, and conflicting national standards shall be withdrawn at the latest by October 2016. Attention is drawn to the possibility that some of the elements of this

21、 document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 16773-1:2007. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countr

22、ies are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Pola

23、nd, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 16773-1:2016 has been approved by CEN as EN ISO 16773-1:2016 without any modification. DIN EN ISO 16773-1:2016-12 EN ISO 16773-1:2016 (E) 3 ForewordISO (the Intern

24、ational Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has b

25、een established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical sta

26、ndardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accord

27、ance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details

28、of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endors

29、ement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsi

30、ble for this document is ISO/TC 35, Paints and varnishes, Subcommittee SC 9, General test methods for paints and varnishes.This second edition cancels and replaces the first edition (ISO 16773-1:2007), which has been technically revised. The main changes are the following:a) the introductory element

31、 of the title, Paints and varnishes, has been omitted because the scope is broadened to include metals and alloys and the main element of the title has been changed to: Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens;b) a reference to ISO/TR 16208 has been adde

32、d;c) the terms are listed in alphabetical order;d) the definition for working electrode has been implemented from ISO/TR 16208;e) the units and symbols have added where applicable.ISO 16773 consists of the following parts, under the general title Electrochemical impedance spectroscopy (EIS) on coate

33、d and uncoated metallic specimens: Part 1: Terms and definitions Part 2: Collection of data Part 3: Processing and analysis of data from dummy cells Part 4: Examples of spectra of polymer-coated and uncoated specimensDIN EN ISO 16773-1:2016-12 EN ISO 16773-1:2016 (E) 4 IntroductionISO 16773 describe

34、s the application of electrochemical impedance spectroscopy (EIS). Although this International Standard was originally developed for coatings and major sections are specific for coatings, the general guidelines can be used also for uncoated samples. For uncoated samples extra information can be foun

35、d in ISO/TR 16208.This part of ISO 16773 defines terms used in electrochemical impedance spectroscopy.ISO 16773-2 describes an experimental procedure for testing laboratory instrumentation for collecting and presenting EIS data collected under potentiostatic control with a focus on high-impedance or

36、ganic coatings on metal surfaces. ISO 16773-2 specifies a dummy cell that models the properties of a high-impedance system. It gives a test procedure and set-up parameters for the collection of impedance data from the dummy cell and the coated metal specimens. It outlines a procedure for comparing t

37、he recorded spectra with the theoretical data for the dummy cell in order to establish guidelines for acceptable instrumental accuracy and limitations. It does not provide any guidance on data interpretation.ISO 16773-3 specifies the procedure used for the evaluation of the experimental results obta

38、ined from dummy cells which simulate high-impedance coated samples and it gives acceptance criteria for the values obtained.ISO 16773-4, which is informative in nature, includes some background on impedance spectra of coated metal specimens and some typical examples of spectra from actual coatings.I

39、SO/TR 16208 describes basic principles of electrochemical impedance spectroscopy (EIS) specially focusing on the corrosion of metallic materials. It also deals with how to use electrochemical apparatus, set up and connect electrical instruments, present measured data, and analyse results.DIN EN ISO

40、16773-1:2016-12 EN ISO 16773-1:2016 (E) 5 1 ScopeThis part of ISO 16773 defines terms for electrochemical impedance spectroscopy (EIS) for use in the other parts of ISO 16773.2 Terms and definitions2.1peak-to-peak amplitude2U0maximum value between maximum and minimum excitation of the applied a.c. p

41、erturbation signalNote 1 to entry: The peak-to-peak amplitude is usually expressed in millivolts.2.2rms amplitudeUrmsroot-mean-square (i.e. effective) value of the applied a.c. perturbation signalNote 1 to entry: This is the peak-to-peak value of the a.c. amplitude, divided by 22 .2.3Bode plotcurves

42、 of (a) phase angle (2.36) versus the logarithm of the applied frequency and (b) the logarithm of the magnitude of the impedance (2.28) |Z| versus the logarithm of the applied frequency2.4charge transfer resistanceRctresistance of the resistor representing the metal-electrolyte interface characteris

43、tics in the equivalent circuit (2.18)Note 1 to entry: The charge transfer resistance is usually expressed in ohms. The specific charge transfer resistance is usually expressed in ohms times square centimetres.2.5coatinglayer formed from a single or multiple application of a coating material to a sub

44、strateSOURCE: ISO 4618:2014, 2.50.12.6coatingprocess of applying a coatNote 1 to entry: The use of the term “coating” for “coating material” is deprecated.SOURCE: ISO 4618:2014, 2.50.2DIN EN ISO 16773-1:2016-12 EN ISO 16773-1:2016 (E) 6 2.7coating capacitanceCccapacitance of the capacitor representi

45、ng the electrical capacitance of the coating (2.5) in the equivalent circuit (2.18)Note 1 to entry: The coating capacitance is usually expressed in nanofarads. The specific coating capacitance is usually expressed in nanofarads per square centimetre.Note 2 to entry: For coatings which do not have id

46、eal capacitance, the constant phase element (CPE) is frequently used. The use of a constant phase element does not have a physical meaning.2.8coating resistanceRcresistance (2.40) of the resistor representing the electrical resistance of the coating (2.5) in the equivalent circuit (2.18)Note 1 to en

47、try: The coating resistance is usually expressed in gigaohms. The specific coating resistance is usually expressed in gigaohms times square centimetres.2.9corrosion potentialUcorpotential of a corroding surface at which the rate of oxidation (corrosion) and the rate of reduction of the one or more o

48、xidants are equalNote 1 to entry: This is also known as the mixed potential or the rest potential.Note 2 to entry: This potential is measured relative to a reference electrode (2.39) under open-circuit conditions.Note 3 to entry: The corrosion potential is usually expressed in volts.2.10corrosion rateamount of metal lost in unit timeNote 1 to entry: The corrosion rate is usually expressed in millimetres per year.2.11counter electrod