DIN 13-24-2005 General purpose ISO metric screw threads - Part 24 Limits of sizes for fine pitch threads with the prefered tolerance classes - Nominal diameter from 112 mm to 180 m.pdf

《DIN 13-24-2005 General purpose ISO metric screw threads - Part 24 Limits of sizes for fine pitch threads with the prefered tolerance classes - Nominal diameter from 112 mm to 180 m.pdf》由会员分享，可在线阅读，更多相关《DIN 13-24-2005 General purpose ISO metric screw threads - Part 24 Limits of sizes for fine pitch threads with the prefered tolerance classes - Nominal diameter from 112 mm to 180 m.pdf（19页珍藏版）》请在麦多课文档分享上搜索。

1、 DEUTSCHE NORMAugust 2005DIN 13-24 ICS 21.040.10 Supersedes DIN 13-24:1983-10 General purpose ISO metric screw threads Part 24: Limits of sizes for fine pitch threads with preferred tolerance classes Nominal thread diameters of 112 mm to 180 mm Metrisches ISO-Gewinde allgemeiner Anwendung Teil 24: G

2、renzmae fr Feingewinde mit bevorzugten Toleranzklassen Gewinde-Nenndurchmesser von 112 mm bis 180 mm Document comprises 19 pagesTranslation by DIN-Sprachendienst. In case of doubt, the German-language original should be consulted as the authoritative text. No part of this translation may be reproduc

3、ed without prior permission of DIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). English price group 12 www.din.de www.beuth.de !,ni,“11.06 9757009DIN 13-24:2005-08 2 Contents Page Foreword 2

4、1 Scope 3 2 Normative references 3 3 Terms and definitions . 4 4 Limits of size 4 Figures Figure 1 Internal thread with tolerance position H . 4 Figure 2 External thread with tolerance position h 5 Figure 3 External thread with tolerance position g 5 Tables Table 1 Limits of size . 6 Foreword This s

5、tandard has been prepared by Section B Gewinde of the Normenausschuss Technische Grundlagen (Fundamental Technical Standards Committee). It is an editorially revised edition of DIN 13-24:1983-10, except that one limit size given in table 1 has been corrected. The normative references have been updat

6、ed and the designations used in the German edition have been modified in form, but not in substance, to conform with standard terminology (see amendments). Amendments The following amendments have been made to DIN 13-24:1983-10: a) the title of the standard is now more precise; b) the maximum limit

7、of size for the pitch diameter of the external thread M135 3 6g has been corrected from 133,033 to 133,003; c) in the German edition of this standard, the following terminology has been modified. The first two terms have also been changed in the English translation: Innengewinde (internal thread) re

8、places Muttergewinde (nut thread), Auengewinde (external thread) replaces Bolzengewinde (bolt thread), Mindestma (minimum limit of size) replaces Kleinstma, DIN 13-24:2005-08 3 Hchstma (maximum limit of size) replaces Grtma, Toleranzklasse (tolerance class) replaces Toleranzfeld; d) the normative re

9、ferences have been updated; e) the standard has been editorially revised, Previous editions DIN 13-43:1965-08 DIN 13-24:1973-02, 1983-10 1 Scope This standard applies for ISO general purpose screw threads with a basic profile as in DIN ISO 68-1. It sets out limits of size for fine pitch threads with

10、 nominal thread diameters of 112 mm to 180 mm, with preferred tolerance classes. 2 Normative references This standard incorporates, by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the titles of the pub

11、lications are listed below. For dated references, subsequent amendments to or revisions of any of these publications apply to this standard only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to (including any amendments) appl

12、ies. DIN 13-5, General purpose ISO metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads with diameters from 7,5 mm to 200 mm DIN 13-6, General purpose ISO metric screw threads Part 6: Nominal sizes for 1,5 mm fine pitch threads with diameters from 12 mm to 300 mm DIN

13、13-7, General purpose ISO metric screw threads Part 7: Nominal sizes for 2 mm fine pitch threads with diameters from 17 mm to 300 mm DIN 13-8, General purpose ISO metric screw threads Part 8: Nominal sizes for 3 mm fine pitch threads with diameters from 28 mm to 300 mm DIN 13-9, ISO general purpose

14、metric screw threads Part 9: Nominal sizes for 4 mm fine pitch threads with nominal diameter from 40 mm to 300 mm DIN 13-10, General purpose ISO metric screw threads Part 10: Nominal sizes for 6 mm fine pitch threads with diameters from 70 mm to 500 mm DIN 13-11, General purpose ISO metric screw thr

15、eads Part 11: Nominal sizes for 8 mm fine pitch threads with diameters from 130 mm to 1 000 mm DIN 2244, Screw threads Terms and screw thread elements for parallel screw threads DIN ISO 68-1, ISO general purpose screw threads Basic profile Part 1: Metric screw threads DIN ISO 965-1, ISO general purp

16、ose metric screw threads Tolerances Part 1: Principles and basic data DIN 13-24:2005-08 4 DIN ISO 965-3, ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads 3 Terms and definitions For the purpose of this standard, the terms and definitions used in

17、 DIN 2244 shall apply*). 4 Limits of size The limits of size for fine pitch threads with preferred tolerance classes (cf. DIN ISO 965-1) have been calculated on the basis of the nominal dimensions as in DIN 13-5 to DIN 13-11, applying the limit deviations and tolerances as in DIN ISO 965-1. Limits o

18、f size for threads with tolerance classes not covered in this standard may be calculated using the limit deviations as in DIN ISO 965-3. The limits for the root radius of the external thread are specified in DIN ISO 965-1 as R = 0,144 34 P = H/6 for the maximum limit of size and Rmin= 0,125 P H/7 fo

19、r the minimum limit of size of the minor diameter d3. Key D Nominal thread diameter, major diameter D1Minor diameter D2Pitch diameter aMinimum limit of size bMaximum limit of size Figure 1 Internal thread with tolerance position H *) Translators note: Standard only available in German. DIN 13-24:200

20、5-08 5 Key d Nominal thread diameter, major diameter d2Pitch diameter d3Minor diameter aMinimum limit of size bMaximum limit of size Figure 2 External thread with tolerance position h Key d Nominal thread diameter, major diameter d2Pitch diameter d3Minor diameter aMinimum limit of size bMaximum limi

21、t of size Figure 3 External thread with tolerance position g DIN 13-24:2005-08 6 Table 1 Limits of size Dimensions in millimetres Internal thread External thread Nomi-nal thread diam-eter Pitch Major diam-eter Pitch diameter Minor diameter Major diameter Pitch diameter Minor diametera d = D P D D2D1

22、d d2d3Toler-ance class min. min. max. min. max. Toler-ance class max. min. max. min. max. min. 1 5H 112,000 111,350 111,510 110,917 111,107 4h 112,000 111,888 111,350 111,255 110,773 110,6391 6H 112,000 111,350 111,550 110,917 111,153 6g 111,974 111,794 111,324 111,174 110,747 110,5581 7H 112,000 11

23、1,350 111,600 110,917 111,217 1,5 5H 112,000 111,026 111,206 110,376 110,612 4h 112,000 111,850 111,026 110,920 110,160 109,9961,5 6H 112,000 111,026 111,250 110,376 110,676 6g 111,968 111,732 110,994 110,824 110,128 109,9001,5 7H 112,000 111,026 111,306 110,376 110,751 2 5H 112,000 110,701 110,901

24、109,835 110,135 4h 112,000 111,820 110,701 110,583 109,546 109,3512 6H 112,000 110,701 110,951 109,835 110,210 6g 111,962 111,682 110,663 110,473 109,508 109,2412 7H 112,000 110,701 111,016 109,835 110,310 8g 111,962 111,512 110,663 110,363 109,508 109,1313 5H 112,000 110,051 110,287 108,752 109,152

25、 4h 112,000 111,764 110,051 109,911 108,319 108,0633 6H 112,000 110,051 110,351 108,752 109,252 6g 111,952 111,577 110,003 109,779 108,271 107,9313 7H 112,000 110,051 110,426 108,752 109,382 8g 111,952 111,352 110,003 109,648 108,271 107,8004 5H 112,000 109,402 109,667 107,670 108,145 4h 112,000 111

26、,700 109,402 109,242 107,093 106,7794 6H 112,000 109,402 109,737 107,670 108,270 6g 111,940 111,465 109,342 109,092 107,033 106,629112 4 7H 112,000 109,402 109,827 107,670 108,420 8g 111,940 111,190 109,342 108,942 107,033 106,4791 5H 115,000 114,350 114,510 113,917 114,107 4h 115,000 114,888 114,35

27、0 114,255 113,773 113,6391 6H 115,000 114,350 114,550 113,917 114,153 6g 114,974 114,794 114,324 114,174 113,747 113,5581 7H 115,000 114,350 114,600 113,917 114,217 1,5 5H 115,000 114,026 114,206 113,376 113,612 4h 115,000 114,850 114,026 113,920 113,160 112,9961,5 6H 115,000 114,026 114,250 113,376

28、 113,676 6g 114,968 114,732 113,994 113,824 113,128 112,9001,5 7H 115,000 114,026 114,306 113,376 113,751 2 5H 115,000 113,701 113,901 112,835 113,135 4h 115,000 114,820 113,701 113,583 112,546 112,3512 6H 115,000 113,701 113,951 112,835 113,210 6g 114,962 114,682 113,663 113,473 112,508 112,2412 7H

29、 115,000 113,701 114,016 112,835 113,310 8g 114,962 114,512 113,663 113,363 112,508 112,1313 5H 115,000 113,051 113,287 111,752 112,152 4h 115,000 114,764 113,051 112,911 111,319 111,0633 6H 115,000 113,051 113,351 111,752 112,252 6g 114,952 114,577 113,003 112,779 111,271 110,9313 7H 115,000 113,05

30、1 113,426 111,752 112,382 8g 114,952 114,352 113,003 112,648 111,271 110,8004 5H 115,000 112,402 112,667 110,670 111,145 4h 115,000 114,700 112,402 112,242 110,093 109,7794 6H 115,000 112,402 112,737 110,670 111,270 6g 114,940 114,465 112,342 112,092 110,033 109,6294 7H 115,000 112,402 112,827 110,6

31、70 111,420 8g 114,940 114,190 112,342 111,942 110,033 109,4796 5H 115,000 111,103 111,418 108,505 119,135 4h 115,000 114,625 111,103 110,913 107,639 107,2186 6H 115,000 111,103 111,503 108,505 109,305 6g 114,920 114,320 111,023 110,723 107,559 107,028115 6 7H 115,000 111,103 111,603 108,505 109,505

32、8g 114,920 113,970 111,023 110,548 107,559 106,8531 5H 118,000 117,350 117,510 116,917 117,107 4h 118,000 117,888 117,350 117,255 116,773 116,6391 6H 118,000 117,350 117,550 116,917 117,153 6g 117,974 117,794 117,324 117,174 116,747 116,558118 1 7H 118,000 117,350 117,600 116,917 117,217 DIN 13-24:2

33、005-08 7 Table 1 (continued) Dimensions in millimetres Internal thread External thread Nomi-nal thread diam-eter Pitch Major diam-eter Pitch diameter Minor diameter Major diameter Pitch diameter Minor diametera d = D P D D2D1d d2d3Toler-ance class min. min. max. min. max. Toler-ance class max. min.

34、max. min. max. min. 1,5 5H 118,000 117,026 117,206 116,376 116,612 4h 118,000 117,850 117,026 116,920 116,160 115,9961,5 6H 118,000 117,026 117,250 116,376 116,676 6g 117,968 117,732 116,994 116,824 116,128 115,9001,5 7H 118,000 117,026 117,306 116,376 116,751 2 5H 118,000 116,701 116,901 115,835 11

35、6,135 4h 118,000 117,820 116,701 116,583 115,546 115,3512 6H 118,000 116,701 116,951 115,835 116,210 6g 117,962 117,682 116,663 116,473 115,508 115,2412 7H 118,000 116,701 117,016 115,835 116,310 8g 117,962 117,512 116,663 116,363 115,508 115,1313 5H 118,000 116,051 116,287 114,752 115,152 4h 118,00

36、0 117,764 116,051 115,911 114,319 114,0633 6H 118,000 116,051 116,351 114,752 115,252 6g 117,952 117,577 116,003 115,779 114,271 113,9313 7H 118,000 116,051 116,426 114,752 115,382 8g 117,952 117,352 116,003 115,648 114,271 113,8004 5H 118,000 115,402 115,667 113,670 114,145 4h 118,000 117,700 115,4

37、02 115,242 113,093 112,7794 6H 118,000 115,402 115,737 113,670 114,270 6g 117,940 117,465 115,342 115,092 113,033 112,629118 4 7H 118,000 115,402 115,827 113,670 114,420 8g 117,940 117,190 115,342 114,942 113,033 112,4791 5H 120,000 119,350 119,510 118,917 119,107 4h 120,000 119,888 119,350 119,255

38、118,773 118,6391 6H 120,000 119,350 119,550 118,917 119,153 6g 119,974 119,794 119,324 119,174 118,747 118,5581 7H 120,000 119,350 119,600 118,917 119,217 1,5 5H 120,000 119,026 119,206 118,376 118,612 4h 120,000 119,850 119,026 118,920 118,160 117,9961,5 6H 120,000 119,026 119,250 118,376 118,676 6

39、g 119,968 119,732 118,994 118,824 118,128 117,9001,5 7H 120,000 119,026 119,306 118,376 118,751 2 5H 120,000 118,701 118,901 117,835 118,135 4h 120,000 119,820 118,701 118,583 117,546 117,3512 6H 120,000 118,701 118,951 117,835 118,210 6g 119,962 119,682 118,663 118,473 117,508 117,2412 7H 120,000 1

40、18,701 119,016 117,835 118,310 8g 119,962 119,512 118,663 118,363 117,508 117,1313 5H 120,000 118,051 118,287 116,752 117,152 4h 120,000 119,764 118,051 117,911 116,319 116,0633 6H 120,000 118,051 118,351 116,752 117,252 6g 119,952 119,577 118,003 117,779 116,271 115,9313 7H 120,000 118,051 118,426

41、116,752 117,382 8g 119,952 119,352 118,003 117,648 116,271 115,8004 5H 120,000 117,402 117,667 115,670 116,145 4h 120,000 119,700 117,402 117,242 115,093 114,7794 6H 120,000 117,402 117,737 115,670 116,270 6g 119,940 119,465 117,342 117,092 115,033 114,6294 7H 120,000 117,402 117,827 115,670 116,420

42、 8g 119,940 119,190 117,342 116,942 115,033 114,4796 5H 120,000 116,103 116,418 113,505 114,135 4h 120,000 119,625 116,103 115,913 112,639 112,2186 6H 120,000 116,103 116,503 113,505 114,305 6g 119,920 119,320 116,023 115,723 112,559 112,028120 6 7H 120,000 116,103 116,603 113,505 114,505 8g 119,920

43、 118,970 116,023 115,548 112,559 111,8531 5H 122,000 121,350 121,510 120,917 121,107 4h 122,000 121,888 121,350 121,255 120,773 120,6391 6H 122,000 121,350 121,550 120,917 121,153 6g 121,974 121,794 121,324 121,174 120,747 120,5581 7H 122,000 121,350 121,600 120,917 121,217 1,5 5H 122,000 121,026 12

44、1,206 120,376 120,612 4h 122,000 121,850 121,026 120,920 120,160 119,9961,5 6H 122,000 121,026 121,250 120,376 120,676 6g 121,968 121,732 120,994 120,824 120,128 119,900122 1,5 7H 122,000 121,026 121,306 120,376 120,751 DIN 13-24:2005-08 8 Table 1 (continued) Dimensions in millimetres Internal threa

45、d External thread Nomi-nal thread diam-eter Pitch Major diam-eter Pitch diameter Minor diameter Major diameter Pitch diameter Minor diametera d = D P D D2D1d d2d3Toler-ance class min. min. max. min. max. Toler-ance class max. min. max. min. max. min. 2 5H 122,000 120,701 120,901 119,835 120,135 4h 1

46、22,000 121,820 120,701 120,583 119,546 119,3512 6H 122,000 120,701 120,951 119,835 120,210 6g 121,962 121,682 120,663 120,473 119,508 119,2412 7H 122,000 120,701 121,016 119,835 120,310 8g 121,962 121,512 120,663 120,363 119,508 119,1313 5H 122,000 120,051 120,287 118,752 119,152 4h 122,000 121,764

47、120,051 119,911 118,319 118,0633 6H 122,000 120,051 120,351 118,752 119,252 6g 121,952 121,577 120,003 119,779 118,271 117,9313 7H 122,000 120,051 120,426 118,752 119,382 8g 121,952 121,352 120,003 119,648 118,271 117,8004 5H 122,000 119,402 119,667 117,670 118,145 4h 122,000 121,700 119,402 119,242

48、 117,093 116,7794 6H 122,000 119,402 119,737 117,670 118,270 6g 121,940 121,465 119,342 119,092 117,033 116,629122 4 7H 122,000 119,402 119,827 117,670 117,420 8g 121,940 121,190 119,342 118,942 117,033 116,4791 5H 125,000 124,350 124,510 123,917 124,107 4h 125,000 124,888 124,350 124,255 123,773 12

49、3,6391 6H 125,000 124,350 124,550 123,917 124,153 6g 124,974 124,794 124,324 124,174 123,747 123,5581 7H 125,000 124,350 124,600 123,917 124,217 1,5 5H 125,000 124,026 124,206 123,376 123,612 4h 125,000 124,850 124,026 123,920 123,160 122,9961,5 6H 125,000 124,026 124,250 123,376 123,676 6g 124,968 124,732 123,994 123,824 123,128 122,9001,5 7H 125,000 124,026 124,306 123,376 123,751 2 5H 125,000 123,701 123,901 122,835 123,135 4h 125,000 124,820 123,701 124,583 122,546 122,351