CAN CSA-ISO IEC 13818-1A-2015 Information technology - Generic coding of moving pictures and associated audio information Part 1 Systems AMENDMENT 1 Extensions for simplified carri.pdf

《CAN CSA-ISO IEC 13818-1A-2015 Information technology - Generic coding of moving pictures and associated audio information Part 1 Systems AMENDMENT 1 Extensions for simplified carri.pdf》由会员分享，可在线阅读，更多相关《CAN CSA-ISO IEC 13818-1A-2015 Information technology - Generic coding of moving pictures and associated audio information Part 1 Systems AMENDMENT 1 Extensions for simplified carri.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、 ISO/IEC 2014. CSA Group 2015. All rights reserved. Unauthorized reproduction is strictly prohibited.Amendment 1:2015 (IDT) toCAN/CSA-ISO/IEC 13818-1:15(ISO/IEC 13818-1:2013, IDT)National Standard of CanadaAmendment 1:2015 (IDT) to CAN/CSA-ISO/IEC 13818-1:15Information technology Generic coding of m

2、oving pictures andassociated audio information: Part 1: SystemsAMENDMENT 1: Extensions for simplified carriage of MPEG-4 overMPEG-2(ISO/IEC 13818-1:2013, IDT)Standards Update ServiceAmendment 1:2015 (IDT) to CAN/CSA-ISO/IEC 13818-1:15December 2015Title: Information technology Generic coding of movin

3、g pictures and associated audioinformation: Part 1: SystemsAMENDMENT 1: Extensions for simplified carriage of MPEG-4 over MPEG-2To register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for update

4、s to this publication is 2424059.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect yourpersonal information.Reference numberISO/IEC 13818-1:2013/Amd.1:2014(E)ISO/IEC 2014INTERN

5、ATIONAL STANDARD ISO/IEC13818-1Fourth edition2013-06-15AMENDMENT 12014-05-01Information technology Generic coding of moving pictures and associated audio information: Part 1: Systems AMENDMENT 1: Extensions for simplified carriage of MPEG-4 over MPEG-2 Technologies de linformation Codage gnrique des

6、 images animes et du son associ Partie 1: Systmes AMENDEMENT 1: Extensions pour transport simplifi de MPEG-4 sur MPEG-2 ISO/IEC 13818-1:2013/Amd.1:2014(E) COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2014 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utili

7、zed in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax +

8、 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org ii ISO/IEC 2014 All rights reservedAmendment 1:2015 (IDT) toCAN/CSA-ISO/IEC 13818-1:15ISO/IEC 13818-1:2013/Amd.1:2014(E) ISO/IEC 2014 All rights reserved iiiForeword ISO (the International Organization for Standardization) and IEC (the Interna

9、tional Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fiel

10、ds of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a j

11、oint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical commit

12、tee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall

13、 not be held responsible for identifying any or all such patent rights. Amendment 1 to ISO/IEC13818-1:2013 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information, in collaboration with ITU-T

14、. The identical text is published as ITU-T H.222.0 (2012)/Amd.1 (01/2014). Amendment 1:2015 (IDT) toCAN/CSA-ISO/IEC 13818-1:15ISO/IEC 13818-1:2013/Amd.1:2014 (E) Rec. ITU-T H.222.0 (2012)/Amd.1 (01/2014) 1 INTERNATIONAL STANDARD RECOMMENDATION ITU-T Information technology Generic coding of moving pi

15、ctures and associated audio information: Systems Amendment 1 Extensions for simplified carriage of MPEG-4 over MPEG-2 1) Table 2-31 Replace Table 2-31 with: Table 2-31 table_id assignment values Value Description0x00 program_association_section 0x01 conditional_access_section (CA_section) 0x02 TS_pr

16、ogram_map_section 0x03 TS_description_section0x04 ISO_IEC_14496_scene_description_section 0x05 ISO_IEC_14496_object_descriptor_section0x06 Metadata_section 0x07 IPMP Control Information Section (defined in ISO/IEC 13818-11) 0x08 ISO_IEC_14496_section 0x09-0x37 Rec. ITU-T H.222.0 | ISO/IEC 13818-1 re

17、served 0x38-0x3F Defined in ISO/IEC 13818-6 0x40-0xFE User private 0xFF Forbidden 2) Table 2-45 In clause 2.6.1, replace Table 2-45 with: Table 2-45 Program and program element descriptors descriptor_tag TS PS Identification 0 n/a n/a Reserved 1 n/a X Forbidden 2 X X video_stream_descriptor 3 X X au

18、dio_stream_descriptor4 X X hierarchy_descriptor 5 X X registration_descriptor 6 X X data_stream_alignment_descriptor 7 X X target_background_grid_descriptor 8 X X video_window_descriptor 9 X X CA_descriptor 10 X X ISO_639_language_descriptor 11 X X system_clock_descriptor Amendment 1:2015 (IDT) to C

19、AN/CSA-ISO/IEC 13818-1:15ISO/IEC 13818-1:2013/Amd.1:2014 (E) 2 Rec. ITU-T H.222.0 (2012)/Amd.1 (01/2014) Table 2-45 Program and program element descriptors descriptor_tag TS PS Identification 12 X X multiplex_buffer_utilization_descriptor 13 X X copyright_descriptor 14 X maximum_bitrate_descriptor 1

20、5 X X private_data_indicator_descriptor 16 X X smoothing_buffer_descriptor 17 X STD_descriptor 18 X X IBP_descriptor19-26 X Defined in ISO/IEC 13818-6 27 X X MPEG-4_video_descriptor28 X X MPEG-4_audio_descriptor 29 X X IOD_descriptor 30 X SL_descriptor31 X X FMC_descriptor 32 X X external_ES_ID_desc

21、riptor 33 X X MuxCode_descriptor 34 X X FmxBufferSize_descriptor 35 X multiplexBuffer_descriptor36 X X content_labeling_descriptor 37 X X metadata_pointer_descriptor 38 X X metadata_descriptor 39 X X metadata_STD_descriptor 40 X X AVC video descriptor 41 X X IPMP_descriptor (defined in ISO/IEC 13818

22、-11, MPEG-2 IPMP) 42 X X AVC timing and HRD descriptor 43 X X MPEG-2_AAC_audio_descriptor 44 X X FlexMuxTiming_descriptor 45 X X MPEG-4_text_descriptor46 X X MPEG-4_audio_extension_descriptor 47 X X Auxiliary_video_stream_descriptor 48 X X SVC extension descriptor 49 X X MVC extension descriptor50 X

23、 n/a J2K video descriptor 51 X X MVC operation point descriptor 52 X X MPEG2_stereoscopic_video_format_descriptor 53 X X Stereoscopic_program_info_descriptor 54 X X Stereoscopic_video_info_descriptor 55-62 n/a n/a Rec. ITU-T H.222.0 | ISO/IEC 13818-1 Reserved 63 X X Extension_descriptor 64-255 n/a n

24、/a User Private Amendment 1:2015 (IDT) to CAN/CSA-ISO/IEC 13818-1:15ISO/IEC 13818-1:2013/Amd.1:2014 (E) Rec. ITU-T H.222.0 (2012)/Amd.1 (01/2014) 3 3) Clauses 2.6.90 to 2.6.92 Insert after clause 2.6.89: 2.6.90 Extension descriptor This descriptor provides a mechanism to extend the Rec. ITU-T H.222.

25、0 | ISO/IEC 13818-1 descriptor range (see Table 2-45). The descriptors which are based on the extension descriptor are signalled using the extension descriptor with extension_descriptor_tag values defined in Table 2-103ter. Table 2-103bis Extension descriptor Syntax No. of bits Mnemonic Extension_de

26、scriptor () descriptor_tag 8 uimsbf descriptor_length 8 uimsbf extension_descriptor_tag 8 uimsbf if (Extension_descriptor_tag = 0x02) uimsbfObjectDescriptorUpdate() else for i=0; iN; i+) reserved 8 bslbf 2.6.91 Semantic definition of fields in the extension descriptor descriptor_tag The descriptor_t

27、ag is an 8-bit field whose value is defined in Table 2-45. descriptor_length The descriptor_length is an 8-bit field specifying the number of bytes of the descriptor immediately following the descriptor_length field. extension_descriptor_tag The extension_descriptor_tag is an 8-bit field which ident

28、ifies each descriptor that uses this tag value. See Table 2-103ter for the extension_descriptor_tag values. ObjectDescriptorUpdate(): This structure is defined in section 8.5.5.2 of ISO/IEC 14496-1. Table 2-103ter Extension descriptor tag values Extension_descriptor_tag TS PS Identification 0 n/a n/

29、a Reserved 1 n/a X Forbidden 2 X ODUpdate_descriptor 3-255 n/a n/a Rec. ITU-T H.222.0 | ISO/IEC 13818-1 Reserved 2.6.92 ODUpdate_descriptor The ODUpdate_descriptor may be used to carry a set of ObjectDescriptors through an ObjectDescriptorUpdate, as a replacement or as a complement to ISO/IEC 14496

30、object descriptor streams defined in the IOD. If used, the ObjectDescriptorUpdate command shall be processed by the MPEG-4 terminal as defined in clause 7.2.5.5.2 of ISO/IEC 14496-1. The descriptors carried in the ODUpdate_descriptor are in the same name scope as the scene description described in t

31、he InitialObjectDescriptor carried in the IOD descriptor. When an ODUpdate_descriptor is used within a transport stream, the ODUpdate_descriptor shall be conveyed in the descriptor loop immediately following the program_info_length field in the program map table, and shall be included after an IOD d

32、escriptor. Amendment 1:2015 (IDT) to CAN/CSA-ISO/IEC 13818-1:15ISO/IEC 13818-1:2013/Amd.1:2014 (E) 4 Rec. ITU-T H.222.0 (2012)/Amd.1 (01/2014) When an ODUpdate_descriptor is used within a program stream, the ODUpdate_descriptor shall be conveyed in the descriptor loop immediately following the progr

33、am_stream_info_length field in the program stream map, and shall be included after an IOD descriptor. If an ODUpdate_descriptor is included before an IOD descriptor or if IOD descriptor is not present, then the ODUpdate descriptor shall be ignored. More than one ODUpdate_descriptor may be included i

34、n a program map table or program stream map. 4) Clause 2.11.3.1 At the end of clause 2.11.3.1 add: Additionally, an ISO/IEC 14496 audiovisual scene may refer to non SL-Packetized streams carried in an Rec. ITU-T H.222.0 | ISO/IEC 13818-1 transport stream using a “pid:/PID_NUMBER“ URL scheme instead

35、of a “od:/OD_ID“ URL scheme. ISO/IEC 14496 streams may derive their time base from the PCR of the program through the OCR_ES_ID mechanism. 5) Clause 2.11.3.3 a) In clause 2.11.3.3, add the following new bullet point to the end of the first list of bullet points: The object time base of an SL-packeti

36、zed stream whose OCR_ES_ID identifies a non SL-packetized stream with a PID equal to the PCR PID is fstc(t) / 300 b) Replace the last paragraph of clause 2.11.3.3 with: For SL-packetized streams inheriting their object time base from the PCR PID, the following considerations apply: TimeStampResoluti

37、on = 90000 / 2k, with k a positive integer larger than or equal to zero. TimeStampLength = 33k. For SL-packetized streams carrying an OCR, the relationship between a value of the STC and the corresponding value of the object time base of a stream is established by associating PTS fields in PES packe

38、t headers with the OCR or FCR in SL packet headers and FlexMux Stream packets respectively, as specified in 2.11.3.6 and 2.11.3.7. For SL-packetized streams inheriting their time base from the PCR, the object time base of such a stream is fstc(t) / 300. 6) Clause 2.11.3.8 a) In clause 2.11.3.8, repl

39、ace: Only SL-packetized object descriptor streams and scene description streams shall use ISO_IEC_14496_sections. with: Any ISO/IEC 14496 stream may be carried over ISO_IEC_14496_sections. b) In clause 2.11.3.8, replace: Table 2-105 shows the syntax of ISO_IEC_14496_sections defined to convey ISO/IE

40、C 14496-1 elementary streams, qualified by the table_id as either object descriptor or scene description stream data. with: Table 2-105 shows the syntax of ISO_IEC_14496_sections defined to convey ISO/IEC 14496-1 elementary streams, qualified by the table_id as either object descriptor stream data,

41、scene description stream data or any other ISO/IEC 14496 stream data. Amendment 1:2015 (IDT) to CAN/CSA-ISO/IEC 13818-1:15ISO/IEC 13818-1:2013/Amd.1:2014 (E) Rec. ITU-T H.222.0 (2012)/Amd.1 (01/2014) 5 c) In clause 2.11.3.8, add the following sentence:Other ISO/IEC 14496 stream data consists of an I

42、SO/IEC 14496 table. The ISO/IEC 14496 table may be transmitted in multiple ISO_IEC_14496_sections. after: It is not required that a complete table be received in order to process its payload. However, the payload of sections shall be processed in the correct order, as indicated by the value of the s

43、ection_number field in the ISO_IEC_14496_section header bytes. d) In clause 2.11.3.8, replace:This 8-bit field shall be set to 0x04 or 0x05 in case of an ISO_IEC_14496_section. A value of 0x04 indicates an ISO_IEC_14496_scene_description_section that carries an ISO/IEC 14496-1 scene description stre

44、am. A value of 0x05 indicates an ISO_IEC_14496_object_descriptor_section that carries an ISO/IEC 14496-1 object descriptor stream. with: This 8-bit field shall be set to 0x04, 0x05, or 0x08, in case of an ISO_IEC_14496_section. A value of 0x04 indicates an ISO_IEC_14496_section that carries an ISO/I

45、EC 14496-1 scene description stream. A value of 0x05 indicates an ISO_IEC_14496_section that carries an ISO/IEC 14496-1 object descriptor stream. A value of 0x08 indicates an ISO_IEC_14496_section that carries other ISO/IEC 14496 streams. 7) Annex Ra) In clause R.2, replace the following bullet: Loc

46、ate the additional streams using their ES_ID and the stream map table.with: Locate the additional streams using their ES_ID and the stream map table. If ODUpdate_descriptors are present in the first descriptor loop, process the ObjectDescriptor_Update asdefined in 2.6.92.b) At the end of Annex R add

47、:Figure R.3 gives an example of ISO/IEC 14496 program elements in a transport stream, consisting of a scene description stream (BIFS-Command), and audio and video streams natively carried over PES (no SL packetization or FlexMux). BIFS-Command stream are conveyed by means of ISO_IEC_14496_sections,

48、and the BIFS scene directly refers to the audio and video streams in the transport stream through “pid:/“ URLs in the BIFS media nodes. Amendment 1:2015 (IDT) to CAN/CSA-ISO/IEC 13818-1:15ISO/IEC 13818-1:2013/Amd.1:2014 (E) 6 Rec. ITU-T H.222.0 (2012)/Amd.1 (01/2014) H.222.0(12)-Amd.1(14)_FR.3Progra

49、m association tableMPEG-2 transport streamBIFS streamTS packet PID = 0 0111TS packet PID = 00100TS packet PID = 00000ISO_IEC_14496_SectionTS packet PID = 00113MPEG-4 audioAAC streamMPEG-4 videoAVC streamPES packetTS packet PID = 00114PES packet.program_map_PID = 00100.program_number = 00001.CRC_32Initial object descriptorTS program MAP section.Program_stream_info_length2 _descriptor_loop ndIOD_descriptorstreamType = 0132 _descriptor_loop ndelementary_PID = 00111SL_De