BS PD CEN TS 15968-2010 Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles liquids and fire fighting foams Method for sampling e涂.pdf

《BS PD CEN TS 15968-2010 Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles liquids and fire fighting foams Method for sampling e涂.pdf》由会员分享，可在线阅读，更多相关《BS PD CEN TS 15968-2010 Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles liquids and fire fighting foams Method for sampling e涂.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationPD CEN/TS 15968:2010Determination of extractableperfluorooctanesulphonate(PFOS) in coated andimpregnated solid articles,liquids and fire fighting foams Method for sampling,extraction and analysis by LC-qMS or LC-tandem/MSCopyright British Standards Institution Provided by IH

2、S under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TS 15968:2010 PUBLISHED DOCUMENTNational forewordThis Published Document is the UK implementation of CEN/TS15968:2010.The UK participation in its preparation was ent

3、rusted to TechnicalCommittee TCI/80, Chemical testing of textiles.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication.

4、 The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 85786 7ICS 71.040.50; 71.080.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy C

5、ommittee on 31 January 2014.Amendments issued since publicationDate Text affectedCopyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TS 15968:2010TECHNICAL SPECIFI

6、CATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 15968 August 2010 ICS 71.040.50; 71.080.20 English Version Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams - Method for sampling, extraction and analy

7、sis by LC-qMS or LC-tandem/MS Dtermination du sulfonate de perfluorooctane (SPFO) extractible dans des articles solides couchs et imprgns, des liquides et des mousses anti-incendie - Mthode dchantillonnage, dextraction et danalyse par LC-MS ou LC-MS/MS Bestimmung von extrahierbarem Perfluoroctansulf

8、onat (PFOS) in beschichteten und imprgnierten Feststoffartikeln, Flssigkeiten und Feuerlschschumen -Verfahren zur Probenahme, Extraktion und Analyse mittels LC-MS oder LC-MS This Technical Specification (CEN/TS) was approved by CEN on 25 October 2009 for provisional application. The period of validi

9、ty of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are required to announce the existence of this CEN/TS in the sa

10、me way as for an EN and to make the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached. CEN member

11、s are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, S

12、weden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Member

13、s. Ref. No. CEN/TS 15968:2010: ECopyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TS 15968:2010CEN/TS 15968:2010 (E) 2 Contents Page Foreword 4Introduction .51 S

14、cope 62 Normative references 63 Terms and definitions .64 Symbols and abbreviations 75 Principle 76 Apparatus and Reagents 86.1 General 86.2 Equipment 96.3 Reagents for extraction .96.4 Reagents for LC and MS .97 Sampling 107.1 General . 107.2 Conditioning samples 107.3 Sampling solids 107.4 Samplin

15、g products that have separate distinct parts . 107.5 Sampling liquids . 108 Sample pre-treatment . 119 Extraction 119.1 Extraction method for textile, fabrics, leather and paper . 119.2 Clean-up method for textile, fabrics, leather and paper . 119.3 Dilution method for aqueous fire extinguishing foa

16、ms 119.4 Extraction method for other liquids 1210 Interference with LC-tandemMS 1211 Analysis . 1211.1 LC-tandemMS operating conditions . 1211.2 Blank determination . 1211.3 Quality Control samples 1211.4 Identification 1212 System suitability test 1412.1 Calibration . 1412.2 Recovery 1512.3 Blank m

17、easurement 1513 Calculation . 1513.1 Calibration curve for quantification 1513.2 Calculation of results after calibration with reference compounds 1613.3 Calculation of results to PFOS equivalents . 1714 Expression of results . 1715 Test report . 18Annex A (informative) LC-QMS and LC-TOFMS 20Annex B

18、 (informative) . 25Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TS 15968:2010CEN/TS 15968:2010 (E) 3 Annex C (informative) Confirmation of compound identity

19、 by MS methods 26Bibliography 31Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TS 15968:2010CEN/TS 15968:2010 (E) 4 Foreword This document (CEN/TS 15968:2010)

20、 has been prepared by Technical Committee CEN/TC 382 “Project Committee - PFOS”, the secretariat of which is held by NEN. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identif

21、ying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of REACH (1907/2006), annex XVII, designation 53 1. According to the CEN/CENELEC Internal Regulation

22、s, the national standards organizations of the following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal

23、ta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS

24、-,-,-PD CEN/TS 15968:2010CEN/TS 15968:2010 (E) 5 Introduction For implementation of REACH (1907/2006), annex XVII, designation 53 1 the European Commission asked CEN to develop an European Technical Specification with test methods for measuring levels of PFOS containing compounds in preparations, se

25、mi-finished products and articles including textile and coated materials. REACH (1907/2006), annex XVII, designation 53 1 states that the substances that are under the Directive are perfluorooctanesulfonates (PFOS), that means substances with the formula C8F17SO2X (where X=OH, Metal salt (O-M+), hal

26、ide, amide and other derivatives including polymers). Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TS 15968:2010CEN/TS 15968:2010 (E) 6 1 Scope This Technic

27、al Specification describes the determination of perfluorooctanesulfonate (PFOS) in concentrated extracts from coated and impregnated solid articles, liquids and fire extinguishing foams using high performance liquid chromatography-tandem mass spectrometry (LC-tandemMS) or quadrupole mass spectrometr

28、y (LC-qMS). The method is applicable for a concentration range for PFOS in the extract solution of 0,5 g/l to 50 g/l. WARNING Persons using this Technical Specification should be familiar with normal laboratory practice. This Technical Specification does not purport to address all of the safety prob

29、lems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions. IMPORTANT It is absolutely essential that tests conducted in accordance with this Technical Specification

30、 be carried out by suitably qualified staff. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any am

31、endments) applies. EN 20187, Paper, board and pulps Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990) EN ISO 2419, Leather Physical and mechanical tests Sample preparation and conditioning (ISO 2419:2006) EN ISO 36

32、96:1995, Water for analytical laboratory use Specification and test methods (ISO 3696:1987) EN ISO 8130-9, Coating powders Part 9: Sampling (ISO 8130-9:1992) EN ISO 15194, In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for certified referen

33、ce materials and the content of supporting documentation (ISO 15194:2009) ISO 8466-1, Water quality Calibration and evaluation of analytical methods and estimation of performance characteristics Part 1: Statistical evaluation of the linear calibration function 3 Terms and definitions For the purpose

34、s of this document, the following terms and definitions apply 3.1 analyte substance or chemical constituent that is subjected to measurement 3.2 blank matrix matrix which is largely identical with the analytical one, but does not contain the analyte or contains it in low and known content NOTE Blank

35、s are used to check the analytical process. Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TS 15968:2010CEN/TS 15968:2010 (E) 7 3.3 constituents all pure chem

36、ical materials and substances of which a material is composed 3.4 extract concentrated preparation of the analytes isolated from the treated material 3.5 foams fire extinguishing foams 3.6 overall treated materials materials with a seamless finish 3.7 internal standard compound different from the an

37、alyte, present in the sample with known content or added to the sample, simultaneously detected with the analyte, with physical and chemical properties as similar as possible to the analyte 3.8 reference material RM material, sufficiently homogeneous and stable regarding one or more properties, used

38、 in calibration, assignment of a value to another material, or quality assurance (conform EN ISO 15194) 3.9 coated materials materials that are treated with chemicals to provide them with water and soil repellent properties; or treated for aesthetic or decorative reasons 4 Symbols and abbreviations

39、LC-qMS liquid chromatography (LC) coupled with quadrupole mass spectrometry (qMS) LC-tandemMS liquid chromatography (LC) coupled with tandem mass spectrometry (tandemMS) LC-TOFMS liquid chromatography (LC) coupled with time of flight mass spectrometer (TOFMS) 5 Principle The analytes listed in Table

40、 1, after extraction with methanol, are determined by liquid chromatography with tandem mass spectrometric detection (LC-tandemMS) or liquid chromatography mass spectrometric detection (LC-qMS). The list of analytes is not comprehensive for all possible PFOS derivates. Copyright British Standards In

41、stitution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TS 15968:2010CEN/TS 15968:2010 (E) 8 Table 1 Analytes determinable by this method Compound name Chemical formula Acronym CAS No. Perfluorooct

42、ane sulphonic acid C8F17SO3H PFOS 1763-23-1Perfluorooctane sulphonamide C8F17SO2NH2 PFOSA 754-91-6 N-Methyl-heptadecafluorooctane sulphonamide C8F17SO2NH(CH3) N-Me-FOSA N.A.a N-Ethyl-heptadecafluorooctane sulphonamide C8F17SO2NH(C2H5) N-Et-FOSA N.A.a N-Methyl-heptadecafluorooctane sulphonamidoethano

43、l C8F17SO2N(CH3)CH2CH2OH N-Me-FOSE alcohol 24448-09-7 N-Ethyl-heptadecafluorooctane sulphonamidoethanol C8F17SO2N(C2H5)CH2CH2OH N-Et-FOSE alcohol 1691-99-2 NOTE PFOS may be present in its salt form e.g. potassium salt (CAS 2795-39-3), lithium salt (CAS 29457-72-5), ammonium salt (CAS 29081-56-9) and

44、 diethanolamine salt (CAS 70225-39-5). Others may exist. The method described in this protocol is valid for all these different chemical forms. aN.A.: Not available. This Technical Specification describes the method for determining the PFOS concentration in the following steps: a) sampling (see Clau

45、se 7); b) extraction with methanol (see Clause 9); c) clean up of the methanol solution (see 9.2); d) analysis by LC-qMS or LC-tandemMS (see Clause 11); e) calculation of the results (see Clause 13). 6 Apparatus and Reagents 6.1 General Sample containers shall be rinsed thoroughly with water (0) and

46、 methanol (0) prior to use. Sample containers shall be checked for possible background contamination before use. Equipment or any accessible part of which that may come into contact with the sample or the extract should be free from interfering compounds. Clean all lab-ware and accessible parts of a

47、pparatus for extraction by rinsing with methanol (0). Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TS 15968:2010CEN/TS 15968:2010 (E) 9 6.2 Equipment Use eq

48、uipment free from glass (e.g. PP, PE): cutting die or template and cutting tool to measure and cut area materials (textiles, leather, paper, etc.). Mill to grind granular bulk solids; 125 m sieve; volumetric flasks, with inert stopper; vials, polypropylene or polyethylene; ultrasonic bath, equipped with adjustable and stable bath temperature (20 C to 70 C); concentration