BS ISO IEC 29341-30-1-2017 Information technology UPnP Device Architecture IoT management and control device control protocol IoT management and control architecture overview《信息技术 .pdf

《BS ISO IEC 29341-30-1-2017 Information technology UPnP Device Architecture IoT management and control device control protocol IoT management and control architecture overview《信息技术 .pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 29341-30-1-2017 Information technology UPnP Device Architecture IoT management and control device control protocol IoT management and control architecture overview《信息技术 .pdf（68页珍藏版）》请在麦多课文档分享上搜索。

1、Information technology UPnP Device ArchitecturePart 30-1: IoT management and control device control protocol IoT management and control architecture overviewBS ISO/IEC 29341-30-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Information technology UPnP Device A

2、rchitecture Part 30-1: IoT management and control device control protocol IoT management and control architecture overviewTechnologies de linformation Architecture de dispositif UPnP Partie 30-1: Protocole de contrle de dispositif de gestion et de contrle de lInternet des objets Aperu gnral de larch

3、itecture de gestion et de contrle de lInternet des objetsINTERNATIONAL STANDARDISO/IEC29341-30-1Reference numberISO/IEC 29341-30-1:2017(E)First edition2017-06 ISO/IEC 2017National forewordThis British Standard is the UK implementation of ISO/IEC 29341-30-1:2017.The UK participation in its preparatio

4、n was entrusted to Technical Committee ICT/-/1, Information systems co-ordination.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its c

5、orrect application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 90901 6ICS 35.200Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Stra

6、tegy Committee on 31 July 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS ISO/IEC 29341-30-1:2017Information technology UPnP Device Architecture Part 30-1: IoT management and control device control protocol IoT management and control architecture overviewTechn

7、ologies de linformation Architecture de dispositif UPnP Partie 30-1: Protocole de contrle de dispositif de gestion et de contrle de lInternet des objets Aperu gnral de larchitecture de gestion et de contrle de lInternet des objetsINTERNATIONAL STANDARDISO/IEC29341-30-1Reference numberISO/IEC 29341-3

8、0-1:2017(E)First edition2017-06 ISO/IEC 2017BS ISO/IEC 29341-30-1:2017ii ISO/IEC 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO/IEC 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form

9、 or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet

10、8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO/IEC 29341-30-1:2017(E)BS ISO/IEC 29341-30-1:2017ii ISO/IEC 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO/IEC 2017, Published in SwitzerlandAll rights reserved. Unless otherw

11、ise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address be

12、low or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO/IEC 29341-30-1:2017(E) ISO/IEC 29341-30-1:2017(E) ISO/IEC 2017 All rights reserved iii CON

13、TENTS 1 Scope 1 1.1 Introduction . 1 1.2 Goals 1 1.3 Non-Goals . 1 1.4 IoTManagementAndControl and DataStore Specification Map . 2 2 Normative references . 3 3 Terms, definitions and abbreviations . 4 3.1 IoTManagementAndControl terms and definitions . 4 3.2 DataStore terms and definitions . 5 3.3 C

14、onfiguration Management terms and definitions . 6 3.4 Device Protection terms and definitions 7 4 Architectural Overview 8 4.1 UPnP IoTManagementAndControl Device 8 4.1.1 Sensor Data Model 9 4.1.2 Sensor Collections . 9 4.1.3 Sensor Control . 9 4.1.4 Sensors DataItem(s) 9 4.1.5 Sensor DataItem Descr

15、iption Document 10 4.1.6 Sensors DataRecord(s) 10 4.1.7 Sensors Data Transport . 10 4.1.8 Sensors Groups . 10 4.1.9 Sensor Protection Model 10 4.2 UPnP DataStore Service 12 4.2.1 DataTable(s) 13 4.2.2 DataTable DataRecord(s) . 13 4.2.3 DataTable Dictionary 13 4.2.4 DataItem types . 13 4.2.5 DataTabl

16、e Operations 14 4.2.6 DataStore Protection Model 14 4.3 DataItem Semantics 15 4.3.1 DataItem Name 15 4.3.2 DataItem Prefix 16 4.3.3 DataItem Type . 16 4.3.4 DataItem Encoding . 17 4.3.5 DataItem Description Document . 17 4.4 DataItem Description XML Document . 18 4.4.1 Introduction 18 4.4.2 DataItem

17、 Categories 18 4.4.3 DataItem Description Document Elements 18 4.5 DataItem Description Units of Measurement . 26 4.5.1 SI Prefixes . 26 4.5.2 SI Base Units . 26 4.5.3 SI Derived Units . 26 4.5.4 Non-SI in common use . 27 4.5.5 British units in common use 27 BS ISO/IEC 29341-30-1:2017ISO/IEC 29341-3

18、0-1:2017(E) iv ISO/IEC 2017 All rights reserved 4.5.6 Coordinates . 27 4.5.7 Duration . 28 4.5.8 Encoding . 28 4.6 Theory of Operation (informative) . 29 4.6.1 IoTManagementAndControl Device . 29 4.6.2 Configuring the DataStore service 36 Annex A Sample Device Illustration (informative) . 44 Figure

19、1 IoTManagementAndControl Architectural Components . 8 Figure 2 IoTManagementAndControl Device services 9 Figure 3 DataStore service . 12 Figure 4 DataStore service - DataTable Components 13 Figure A.1 Sample Device 44 Table 1 Sensor Permissions . 10 Table 2 access= attribute allowed values . 20 Tab

20、le 3 treatment= attribute allowed values (measurement) . 20 Table 4 accumulation= attribute allowed values (measurement) . 21 Table 6 relationtype= attribute (alarm) 22 Table 7 limittype= attribute (limit) 23 Table 8 relationtype= attribute allowed values (limit) . 23 Table 9 relationtype= attribute

21、 allowed values (setting) . 24 Table 10 units= attribute allowed values (interval) 24 Table 11 relationtype= attribute allowed values (interval) 25 BS ISO/IEC 29341-30-1:2017ISO/IEC 29341-30-1:2017(E) iv ISO/IEC 2017 All rights reserved 4.5.6 Coordinates . 27 4.5.7 Duration . 28 4.5.8 Encoding . 28

22、4.6 Theory of Operation (informative) . 29 4.6.1 IoTManagementAndControl Device . 29 4.6.2 Configuring the DataStore service 36 Annex A Sample Device Illustration (informative) . 44 Figure 1 IoTManagementAndControl Architectural Components . 8 Figure 2 IoTManagementAndControl Device services 9 Figur

23、e 3 DataStore service . 12 Figure 4 DataStore service - DataTable Components 13 Figure A.1 Sample Device 44 Table 1 Sensor Permissions . 10 Table 2 access= attribute allowed values . 20 Table 3 treatment= attribute allowed values (measurement) . 20 Table 4 accumulation= attribute allowed values (mea

24、surement) . 21 Table 6 relationtype= attribute (alarm) 22 Table 7 limittype= attribute (limit) 23 Table 8 relationtype= attribute allowed values (limit) . 23 Table 9 relationtype= attribute allowed values (setting) . 24 Table 10 units= attribute allowed values (interval) 24 Table 11 relationtype= at

25、tribute allowed values (interval) 25 ISO/IEC 29341-30-1:2017(E) ISO/IEC 2017 All rights reserved v Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that

26、 are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other internat

27、ional organizations, governmental and nongovernmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its fur

28、ther maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

29、 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in th

30、e Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the voluntary nature of Standards, the meaning of ISO

31、specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT), see the following URL: www.iso.org/iso/foreword.html. ISO/IEC 29341301 was prepared by UPnP Forum and adopted, under the PAS pr

32、ocedure, by joint technical committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC. The list of all currently available parts of ISO/IEC 29341 series, under the general title Information technology UPnP Device Architecture, can be found on th

33、e ISO web site. BS ISO/IEC 29341-30-1:2017ISO/IEC 29341-30-1:2017(E) vi ISO/IEC 2017 All rights reserved Introduction ISO and IEC draw attention to the fact that it is claimed that compliance with this document may involve the use of patents as indicated below. ISO and IEC take no position concernin

34、g the evidence, validity and scope of these patent rights. The holders of -these patent rights have assured ISO and IEC that they are willing to negotiate licenses under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statements of th

35、e holders of these patent rights are registered with ISO and IEC. Intel Corporation has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Intel Corporation Standards Licensing Department 5200 NE Elam Young Parkway MS: JFS-98 USA Hillsboro, Ore

36、gon 97124 Microsoft Corporation has informed IEC and ISO that it has patent applications or granted patents as listed below: 6101499 / US; 6687755 / US; 6910068 / US; 7130895 / US; 6725281 / US; 7089307 / US; 7069312 / US; 10/783 524 /US Information may be obtained from: Microsoft Corporation One Mi

37、crosoft Way USA Redmond WA 98052 Philips International B.V. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Philips International B.V. IP 6687755 / US; 6910068 / US; 7130895 / US; 6725281 / US; 7089307 / US; 7069312 / US; 10/783 524 /US

38、Information may be obtained from: Microsoft Corporation One Microsoft Way USA Redmond WA 98052 Philips International B.V. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Philips International B.V. IP 6 170 007 / US; 6 139 177 / US; 6 529

39、 936 / US; 6 470 339 / US; 6 571 388 / US; 6 205 466 / US Information may be obtained from: Hewlett Packard Company 1501 Page Mill Road USA Palo Alto, CA 94304 Samsung Electronics Co. Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from:

40、Digital Media Business, Samsung Electronics Co. Ltd. 416 Maetan-3 Dong, Yeongtang-Gu, KR Suwon City 443-742 Huawei Technologies Co., Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Huawei Technologies Co., Ltd. Administration Buildi

41、ng, Bantian Longgang District Shenzhen China 518129 Qualcomm Incorporated has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Qualcomm Incorporated 5775 Morehouse Drive San Diego, CA USA 92121 Telecom Italia S.p.A.has informed IEC and ISO th

42、at it has patent applications or granted patents. Information may be obtained from: Telecom Italia S.p.A. Via Reiss Romoli, 274 Turin - Italy 10148 Cisco Systems informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Cisco Systems, Inc. 170 West Ta

43、sman Drive San Jose, CA USA 95134 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. ISO and IEC shall not be held responsible for identifying any or all such patent rights. BS ISO/IEC 29341-30-1:201

44、7ISO/IEC 29341-30-1:2017(E) viii ISO/IEC 2017 All rights reserved Original UPnP Document Reference may be made in this document to original UPnP documents. These references are retained in order to maintain consistency between the specifications as published by ISO/IEC and by UPnP Implementers Corpo

45、ration and later by UPnP Forum. The following table indicates the original UPnP document titles and the corresponding part of ISO/IEC 29341: UPnP Document Title ISO/IEC 29341 Part UPnP Device Architecture 1.0 ISO/IEC 29341-1:2008 UPnP Device Architecture Version 1.0 ISO/IEC 29341-1:2011 UPnP Device

46、Architecture 1.1 ISO/IEC 29341-1-1:2011 UPnP Device Architecture 2.0 ISO/IEC 29341-1-2 UPnP Basic:1 Device ISO/IEC 29341-2 UPnP AV Architecture:1 ISO/IEC 29341-3-1:2008 UPnP AV Architecture:1 ISO/IEC 29341-3-1:2011 UPnP AVTransport:1 Service ISO/IEC 29341-3-10 UPnP ConnectionManager:1 Service ISO/IE

47、C 29341-3-11 UPnP ContentDirectory:1 Service ISO/IEC 29341-3-12 UPnP RenderingControl:1 Service ISO/IEC 29341-3-13 UPnP MediaRenderer:1 Device ISO/IEC 29341-3-2 UPnP MediaRenderer:2 Device ISO/IEC 29341-3-2:2011 UPnP MediaServer:1 Device ISO/IEC 29341-3-3 UPnP AVTransport:2 Service ISO/IEC 29341-4-1

48、0:2008 UPnP AVTransport:2 Service ISO/IEC 29341-4-10:2011 UPnP ConnectionManager:2 Service ISO/IEC 29341-4-11:2008 UPnP ConnectionManager:2 Service ISO/IEC 29341-4-11:2011 UPnP ContentDirectory:2 Service ISO/IEC 29341-4-12 UPnP RenderingControl:2 Service ISO/IEC 29341-4-13:2008 UPnP RenderingControl

49、:2 Service ISO/IEC 29341-4-13:2011 UPnP ScheduledRecording:1 ISO/IEC 29341-4-14 UPnP ScheduledRecording:2 ISO/IEC 29341-4-14:2011 UPnP MediaRenderer:2 Device ISO/IEC 29341-4-2 UPnP MediaServer:2 Device ISO/IEC 29341-4-3 UPnP AV Datastructure Template:1 ISO/IEC 29341-4-4:2008 UPnP AV Datastructure Template:1 ISO/IEC 29341-4-4:2011 UPnP DigitalSecurityCamera:1 Device ISO/IEC 29341-5-1 UPnP DigitalSecurityCameraMot