BS EN ISO 9016-2012 Destructive tests on welds in metallic materials Impact tests Test specimen location notch orientation and examination《金属材料焊缝的破坏试验 冲击试验 试样定位、槽口取向和检验》.pdf
《BS EN ISO 9016-2012 Destructive tests on welds in metallic materials Impact tests Test specimen location notch orientation and examination《金属材料焊缝的破坏试验 冲击试验 试样定位、槽口取向和检验》.pdf》由会员分享,可在线阅读,更多相关《BS EN ISO 9016-2012 Destructive tests on welds in metallic materials Impact tests Test specimen location notch orientation and examination《金属材料焊缝的破坏试验 冲击试验 试样定位、槽口取向和检验》.pdf(16页珍藏版)》请在麦多课文档分享上搜索。
1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 9016:2012Destructive tests on weldsin metallic materials Impact tests Test specimenlocation, notch orientation andexamination (ISO 9016:2012)BS EN ISO 9016:2012 BRITISH
2、 STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 9016:2012.It supersedes BS EN ISO 9016:2011 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee WEE/46, Non-destructive testing.A list of organizations represented on this co
3、mmittee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 79591 6ICS 25.160.
4、40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2012.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCH
5、E NORM EN ISO 9016 November 2012 ICS 25.160.40 Supersedes EN ISO 9016:2011English Version Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2012) Essais destructifs des soudures sur matriaux mtalliques -Essai de flex
6、ion par choc - Position de lprouvette, orientation de lentaille et examen (ISO 9016:2012) Zerstrende Prfung von Schweiverbindungen an metallischen Werkstoffen - Kerbschlagbiegeversuch - Probenlage, Kerbrichtung und Beurteilung (ISO 9016:2012)This European Standard was approved by CEN on 31 October 2
7、012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained
8、 on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CE
9、NELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, It
10、aly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix
11、17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 9016:2012: EBS EN ISO 9016:2012EN ISO 9016:2012 (E) 3 Foreword This document (EN ISO 9016:2012) has been prepared by Technical Committee ISO/TC 44 “Weldin
12、g and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2013, and confli
13、cting national standards shall be withdrawn at the latest by May 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document s
14、upersedes EN ISO 9016:2011. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republ
15、ic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 9016:2012 has been appro
16、ved by CEN as a EN ISO 9016:2012 without any modification. BS EN ISO 9016:2012ISO 9016:2012(E) ISO 2012 All rights reserved iiiContents g19g131g137g135Foreword iv1 Scope . 12 Normative reference . 13 Principle 14 Method of denomination 1g886g484g883g3 g15g135g150g150g135g148g139g144g137g3g149g155g14
17、9g150g135g143 1g886g484g884g3 g6g138g131g148g131g133g150g135g148g149 . 15 Examples of denomination 26 Examination 57 Test report . 5Annex A g523g139g144g136g145g148g143g131g150g139g152g135g524 Example of a test report . 6Bibliography 7BS EN ISO 9016:2012ISO 9016:2012(E)Forewordg12g22g18g3g523g150g13
18、8g135g3g12g144g150g135g148g144g131g150g139g145g144g131g142g3g18g148g137g131g144g139g156g131g150g139g145g144g3g136g145g148g3g22g150g131g144g134g131g148g134g139g156g131g150g139g145g144g524g3g139g149g3g131g3g153g145g148g142g134g153g139g134g135g3g136g135g134g135g148g131g150g139g145g144g3g145g136g3g144g1
19、31g150g139g145g144g131g142g3g149g150g131g144g134g131g148g134g149g3g132g145g134g139g135g149g3g523g12g22g18g3g143g135g143g132g135g148g3g132g145g134g139g135g149g524g484g3g23g138g135g3g153g145g148g141g3g145g136g3g146g148g135g146g131g148g139g144g137g3g12g144g150g135g148g144g131g150g139g145g144g131g142g3g
20、22g150g131g144g134g131g148g134g149g3g139g149g3g144g145g148g143g131g142g142g155g3g133g131g148g148g139g135g134g3g145g151g150g3g150g138g148g145g151g137g138g3 g12g22g18g3 g150g135g133g138g144g139g133g131g142g3 g133g145g143g143g139g150g150g135g135g149g484g3 g8g131g133g138g3 g143g135g143g132g135g148g3 g13
21、2g145g134g155g3 g139g144g150g135g148g135g149g150g135g134g3 g139g144g3 g131g3 g149g151g132g140g135g133g150g3 g136g145g148g3 g153g138g139g133g138g3 g131g3 g150g135g133g138g144g139g133g131g142g3g133g145g143g143g139g150g150g135g135g3 g138g131g149g3 g132g135g135g144g3 g135g149g150g131g132g142g139g149g138
22、g135g134g3 g138g131g149g3 g150g138g135g3 g148g139g137g138g150g3 g150g145g3 g132g135g3 g148g135g146g148g135g149g135g144g150g135g134g3 g145g144g3 g150g138g131g150g3 g133g145g143g143g139g150g150g135g135g484g3 g12g144g150g135g148g144g131g150g139g145g144g131g142g3g145g148g137g131g144g139g156g131g150g139g
23、145g144g149g481g3 g137g145g152g135g148g144g143g135g144g150g131g142g3 g131g144g134g3 g144g145g144g486g137g145g152g135g148g144g143g135g144g150g131g142g481g3 g139g144g3 g142g139g131g139g149g145g144g3 g153g139g150g138g3 g12g22g18g481g3 g131g142g149g145g3 g150g131g141g135g3 g146g131g148g150g3 g139g144g3
24、g150g138g135g3 g153g145g148g141g484g3g12g22g18g3 g133g145g142g142g131g132g145g148g131g150g135g149g3 g133g142g145g149g135g142g155g3 g153g139g150g138g3 g150g138g135g3 g12g144g150g135g148g144g131g150g139g145g144g131g142g3 g8g142g135g133g150g148g145g150g135g133g138g144g139g133g131g142g3 g6g145g143g143g1
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSENISO90162012DESTRUCTIVETESTSONWELDSINMETALLICMATERIALSIMPACTTESTSTESTSPECIMENLOCATIONNOTCHORIENTATIONANDEXAMINATION

链接地址:http://www.mydoc123.com/p-582529.html