BS EN ISO 105-E08-1997 Textiles Tests for colour fastness Colour fastness to hot water《纺织品 色牢度试验 耐水浸色牢度 热水》.pdf

《BS EN ISO 105-E08-1997 Textiles Tests for colour fastness Colour fastness to hot water《纺织品 色牢度试验 耐水浸色牢度 热水》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 105-E08-1997 Textiles Tests for colour fastness Colour fastness to hot water《纺织品 色牢度试验 耐水浸色牢度 热水》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 105-E08:1997 Textiles Tests for colour fastness Part E08: Colour fastness to hot water The European Standard EN ISO 105-E08:1996 has the status of a British Standard ICS 59.080.01BSENISO 105-E08:1997 This British Standard, having been prepared under the direction of the Se

2、ctor Board for Materials and Chemicals, was published under the authority of the Standards Board and comes into effect on 15 January 1997 BSI 10-1998 The following BSI references relate to the work on this standard: Committee reference TCI/25 Draft announcement in BSI Update January 1996 ISBN 0 580

3、26906 X Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee TCI/25, Chemical properties, upon which the following bodies were represented: Association of Consulting Scientists Association of Suppliers to the British Clothing

4、Industry British Apparel and Textile Confederation British Clothing Industry Association British Measurement and Testing Association Chemical Industries Association Consumer Policy Committee of BSI Fabric Care Research Association Ltd. Home Laundering Consultative Council International Wool Secretar

5、iat Mail Order Traders Association Ministry of Defence National Wool Textile Export Corporation SATRA Footwear Technology Centre Soap and Detergent Industry Association Society of Dyers and Colourists Textile Finishers Association Participation in the detailed technical work was undertaken by the So

6、ciety of Dyers and Colourists Amendments issued since publication Amd. No. Date CommentsBSENISO105-E08:1997 BSI 10-1998 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 1 Scope 3 2 Normative references 3 3 Principle 3 4 Apparatus and reagent 3 5 Test specimen

7、 3 6 Procedure 3 7 Test report 4 Annex ZA (normative) Normative references to international publications with their relevant European publications 5 List of references Inside back coverBSENISO 105-E08:1997 ii BSI 10-1998 National foreword This British Standard has been prepared by Technical Committe

8、e TCI/25 and is the English language version of ENISO105-E08:1996 Textiles Tests for colour fastness Part E08: Colour fastness to hot water published by the European Committee for Standardization (CEN). It is identical with ISO105-E08:1994 published by the International Organization for Standardizat

9、ion (ISO). This British Standard supersedes the corresponding method in BS1006:1990, which is deleted by amendment. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a B

10、ritish Standard does not of itself confer immunity from legal obligations. Cross-references Publication referred to Corresponding British Standard EN ISO 105-A01:1995 BS EN ISO 105 Textiles. Tests for colour fastness (ISO 105-A01:1994) Part A01:1996 General principles of testing BS EN 20105 Textiles

11、. Tests for colour fastness EN 20105-A02:1994 Part A02:1995 Grey scale for assessing change in colour (ISO 105-A02:1993) EN 20105-A03:1994 Part A03:1995 Grey scale for assessing staining (ISO 105-A03:1993) Summary of pages This document comprises a front cover, an inside front cover, pages i and ii,

12、 theENtitle page, pages 2 to 6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on theinside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 105-E08

13、 August 1996 ICS 59.080.10 Descriptors: Textiles, dyes, tests, chemical tests, water resistance tests, determination, colour fastness, hot water English version Textiles Tests for colour fastness Part E08: Colour fastness to hot water (ISO 105-E08:1994) Textiles Essais de solidit des teintures Parti

14、e E08: Solidit de teintures leau chaude (ISO 105-E08:1994) Textilien Farbechtheitsprfungen Teil E08: Farbechtheit gegen heies Wasser (ISO 105-E08:1994) This European Standard was approved by CEN on 1996-08-16. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate

15、the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists

16、in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies

17、 of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secreta

18、riat: rue de Stassart 36, B-1050 Brussels 1996 Copyright reserved to CEN members Ref. No. EN ISO 105-E08:1996 EENISO 105-E08:1996 BSI 10-1998 2 Foreword The text of the International Standard from Technical Committee ISO/TC 38, Textiles, of the International Organization for Standardization (ISO) ha

19、s been taken over as an European Standard by Technical Committee CEN/TC248, Textiles and textile products, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by

20、February 1997, and conflicting national standards shall be withdrawn at the latest by February 1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, F

21、rance, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. NOTENormative references to International Standards are listed in annex ZA (normative).ENISO105-E08:1996 BSI 10-1998 3 1 Scope This part of ISO 105 specifies

22、 a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of hot water. The method is mainly applicable to wool and textiles containing wool. 2 Normative references The following standards contain provisions which, through reference in this text,

23、constitute provisions of this part of ISO105. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO105 are encouraged to investigate the possibility of applying the most recent editions of the standar

24、ds indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 105-A01:1994, Textiles Tests for colour fastness Part A01: General principles of testing. ISO 105-A02:1993, Textiles Tests for colour fastness Part A02: Grey scale for assessing change in co

25、lour. ISO 105-A03:1993, Textiles Tests for colour fastness Part A03: Grey scale for assessing staining. ISO 105-F:1985, Textiles Tests for colour fastnessPart F: Standard adjacent fabrics. 3 Principle A specimen of the textile in contact with adjacent fabrics is rolled around a glass rod, treated wi

26、th slightly acidified hot water and dried. The change in colour of the specimen and the staining of the adjacent fabrics are assessed by comparison with the grey scales. 4 Apparatus and reagent 4.1 Vessel, to hold a cylindrical specimen 40 mm long in hot water, fitted with reflux condenser to reduce

27、 evaporation. 4.2 Thermostatically controlled bath, to maintain the contents of the vessel (4.1) at 70C 2 C. 4.3 Glass rod, 5mm to 8mm in diameter. 4.4 Wool adjacent fabric, complying with section F01 of ISO 105-F:1985, measuring 40mm 100mm. 4.5 Cotton adjacent fabric complying with sectionF02 of IS

28、O105-F:1985, or, in the case of blends, adjacent fabric made from the kind of fibre admixtured with the wool, complying with the relevant section F03 to F08 of ISO105-F:1985, in each case measuring 40mm 100mm. 4.6 Grade 3 water (seeISO105-A01:1994, subclause8.1), if necessary acidified with acetic a

29、cid to pH 6 0,5. 4.7 Grey scale for assessing change in colour complying with ISO105-A02 and grey scale for assessing staining complying with ISO105-A03. 5 Test specimen 5.1 If the textile to be tested is fabric, place a specimen 40mm 100mm between the two adjacent fabrics (4.4 and 4.5) and sew alon

30、g one of the shorter sides to form a composite specimen. 5.2 If the textile to be tested is yarn, knit it into fabric and treat it as in 5.1, or form a layer of parallel lengths of it between the two adjacent fabrics (4.4 and 4.5), the amount of yarn taken being approximately equal to half the combi

31、ned mass of the adjacent fabrics. Sew around all four sides to hold the yarn in place and to form a composite specimen. 5.3 If the textile to be tested is loose fibre, comb and compress an amount approximately equal to half the combined mass of the adjacent fabrics (4.4 and4.5) into a sheet 40mm 100

32、mm. Place the sheet between the two adjacent fabrics and sew around all four sides to hold the fibres in place and to form a composite specimen. 6 Procedure 6.1 Roll the composite specimen compactly around the glass rod (4.3) to form a cylinder 40mm long, and tie uniformly, but not tightly, with thr

33、ead. 6.2 Place the rod with the specimen in the vessel(4.1) containing slightly acid water (4.6). Leave the specimen in the vessel for 30min under reflux at a temperature of 70C 2C and at a liquor ratio of 30 : 1. During the test ensure that the composite specimen is always submerged in the water. 6

34、.3 Remove the specimen from the rod and squeeze the specimen. Open out the composite specimen by breaking the stitching on all sides except one of the shorter sides and dry it by hanging it in air at a temperature not exceeding 60C with the three parts in contact only at the remaining line of stitch

35、ing.ENISO 105-E08:1996 4 BSI 10-1998 6.4 Assess the change in colour of the specimen and the staining of the adjacent fabrics by comparison with the grey scales (4.7). 7 Test report The test report shall include the following information: a) the number and year of publication of this part of ISO105,

36、 i.e. ISO105-E08:1994; b) all details necessary for identification of the sample tested; c) the numerical grey scale rating for change in colour of the specimen; d) the numerical grey scale rating for staining of each kind of adjacent fabric used.ENISO105-E08:1996 BSI 10-1998 5 Annex ZA (normative)

37、Normative references to international publications with their relevant European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are list

38、ed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. Publication Year Title EN Ye

39、ar ISO 105-A01 1994 Textiles Test for colour fastness PartA01:General principles of testing EN ISO 105-A01 1995 ISO 105-A02 1993 Textiles Test for colour fastness PartA02:Grey scale for assessing change in colour EN 20105-A02 1994 ISO 105-A03 1993 Textiles Test for colour fastness PartA03:Grey scale

40、 for assessing staining EN 20105-A03 19946 blankBSENISO105-E08:1997 BSI 10-1998 List of references See national foreword.BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

41、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the internatio

42、nal level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We wou

43、ld be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual upda

44、ting service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to order

45、s for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library

46、 and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards deve

47、lopments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publ

48、ications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written per

49、mission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.