BS EN 61076-3-116-2008 Connectors for electronic equipment - Product requirements - Rectangular connectors - Detail specification for protective housings for use with 8-way shieldeo.pdf

《BS EN 61076-3-116-2008 Connectors for electronic equipment - Product requirements - Rectangular connectors - Detail specification for protective housings for use with 8-way shieldeo.pdf》由会员分享，可在线阅读，更多相关《BS EN 61076-3-116-2008 Connectors for electronic equipment - Product requirements - Rectangular connectors - Detail specification for protective housings for use with 8-way shieldeo.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、Connectors for electronic equipment Product require-ments Part 3-116: Rectangular connectors Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 seriesinterface Vari

2、ant 13 related to IEC 61076-3-106 Locking leverBS EN 61076-3-116:2008raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/07/2009 07:38, Uncontrolled Copy, (c) BSINational forew

3、ordThis British Standard is the UK implementation of EN 61076-3-116:2008. It isidentical to IEC 61076-3-116:2008.The UK participation in its preparation was entrusted to Technical CommitteeEPL/48, Electromechanical components and mechanical structures for elec-tronic equipment.A list of organization

4、s represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2008ISBN 978 0 580 56743 8ICS 31.220.10BRITISH STANDARDBS EN 61076-3-116:2008Compl

5、iance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on Amendments issued since publicationAmd. No. Date Text affectedMarch31 2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA ST

6、ANDARDS, 06/07/2009 07:38, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 61076-3-116 NORME EUROPENNE EUROPISCHE NORM November 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central

7、 Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61076-3-116:2008 E ICS 31.220.10 English version Connectors for electronic equipment - Product requirements - Part 3-116: Rec

8、tangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever (IEC 61076-3-116:2

9、008) Connecteurs pour quipements lectroniques - Exigences de produit - Partie 3-116: Connecteurs rectangulaires - Spcification particulire pour botiers de protection utiliss avec des connecteurs blinds et non blinds 8 voies pour des frquences infrieures ou gales 600 MHz dans des environnements indus

10、triels incorporant linterface srie CEI 60603-7 - Variante 13 lie la CEI 61076-3-106 - Levier de verrouillage (CEI 61076-3-116:2008) Steckverbinder fr elektronische Einrichtungen - Produktanforderungen - Teil 3-116: Rechteckige Steckverbinder - Bauartspezifikation fr Schutzgehuse fr die Anwendung mit

11、 8-poligen geschirmten und ungeschirmten Steckverbindern fr Frequenzen bis 600 MHz fr industrielle Umgebungen zur Aufnahme der Schnittstelle der Reihe IEC 60603-7 - Ausfhrung 13 zu IEC 61076-3-106 - Verriegelungshebel (IEC 61076-3-116:2008) This European Standard was approved by CENELEC on 2008-10-0

12、1. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtain

13、ed on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Centra

14、l Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal

15、ta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61076-3-116:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/07/2009 07:38, Uncontrolled Copy, (c) BSIEN 61076-3-116:2008 - 2 - Foreword The text of docum

16、ent 48B/1916/FDIS, future edition 1 of IEC 61076-3-116, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61076-3-116 on 2008-10-01. The follo

17、wing dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-10-01 The International E

18、lectrotechnical Commission (IEC) and CENELEC draw attention to the fact that it is claimed that compliance with this document may involve the use of a patent concerning Amphenol 1). The IEC and CENELEC take no position concerning the evidence, validity and scope of this patent right. The holder of t

19、his patent right has assured the IEC that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with IEC. Information may be obtained f

20、rom: Amphenol Socapex S.A.S. 948 Promenade de lArve B.P. 29 74311 Thyez cedex, France Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. IEC and CENELEC shall not be held responsible for identifying

21、any or all such patent rights. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61076-3-116:2008 was approved by CENELEC as a European Standard without any modification. _ 1)Amphenol is the trade name of Amphenol Socapex S.A.S. This information is g

22、iven for the information of users of this International Standard and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance to this profile does not require use of the trade name Amphenol. Use of the trade name Amphenol requires permission from Amphenol

23、Socapex S.A.S. BS EN 61076-3-116:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/07/2009 07:38, Uncontrolled Copy, (c) BSI- 3 - EN 61076-3-116:2008 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following refer

24、enced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common m

25、odifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60050-581 1978 International Electrotechnical Vocabulary (IEV) - Chapter 581: Electromechanical components for electronic equipment - - IEC 60068-1 - 1)Environmental testing - Part 1: General and guid

26、ance EN 60068-1 1994 2)IEC 60068-2-14 - 1)Environmental testing - Part 2: Tests - Test N: Change of temperatureEN 60068-2-14 1999 2)IEC 60068-2-30 - 1)Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)EN 60068-2-30 2005 2)IEC 60512-1 - 1)Connectors for electron

27、ic equipment - Tests and measurements - Part 1: General EN 60512-1 2001 2)IEC 60512-1-100 - 1)Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications EN 60512-1-100 2006 2)IEC 60529 - 1)Degrees of protection provided by enclosures (IP Code) EN 605

28、29 + corr. May 1991 2)1993 IEC 60603-7 - 1)Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors EN 60603-7 200X 3)IEC 60603-7-1 - 1)Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded free and fixed c

29、onnectors with common mating features, with assessed quality EN 60603-7-1 2002 2)IEC 60603-7-2 - 1)Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHzEN 60603-7-2 200X 3)IEC 60603

30、-7-3 - 1)Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz EN 60603-7-3 200X 3)1)Undated reference. 2)Valid edition at date of issue. 3)To be ratified. BS EN 61076-3-116:2008Licens

31、ed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/07/2009 07:38, Uncontrolled Copy, (c) BSIEN 61076-3-116:2008 - 4 - Publication Year Title EN/HD Year IEC 60603-7-4 - 1)Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data t

32、ransmissions with frequencies up to 250 MHzEN 60603-7-4 2005 2)IEC 60603-7-5 - 1)Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHzEN 60603-7-5 200X 3)IEC 60603-7-7 - 1)Connectors

33、for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz EN 60603-7-7 2006 2)IEC 60664-1 - 1)Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and te

34、sts EN 60664-1 2007 2)IEC 61076-1 - 1)Connectors for electronic equipment - Product requirements - Part 1: Generic specification EN 61076-1 2006 2)IEC 61156-2 - 1)Multicore and symmetrical pair/quad cables for digital communications - Part 2: Horizontal floor wiring - Sectional specification - - IEC

35、 61156-3 - 1)Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area wiring - Sectional specification - - IEC 61156-4 - 1)Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification - - BS EN 61076-3-116:200

36、8Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/07/2009 07:38, Uncontrolled Copy, (c) BSI 2 61076-3-116 IEC:2008 CONTENTS 1 General data 6 1.1 Scope and object.6 1.2 Normative references 6 2 Terms and definitions .7 3 Dimensional information .7 3.1 Common features 7 3.2 General .8 3.3 Con

37、tact arrangement of all connector types.8 3.4 IP65 and IP67 sealing .8 3.5 Industrial IEC 60603-7 variant 13 Locking lever8 3.5.1 Industrial IEC 60603-7 variant 13, fixed connectors .8 3.5.2 Industrial IEC 60603-7 variant 13, free connectors 10 3.6 Termination and mounting information.11 3.7 General

38、 .11 3.8 Mounting information for variant 13, fixed connector11 3.9 Cap for variant 13 fixed connector.12 4 Gauges 13 4.1 Connectors, IEC 60603-7 interface13 5 Characteristics .13 5.1 Climatic category.13 5.2 Electrical .13 5.2.1 Clearance and creepage distances13 5.2.2 Voltage proof.14 5.2.3 Curren

39、t-derating diagram.14 5.2.4 Mating cycles with power applied.14 5.2.5 Initial contact resistance 14 5.2.6 Input-to-output resistance15 5.2.7 Resistance unbalance .15 5.2.8 Initial insulation resistance 15 5.3 Transmission characteristics .15 5.3.1 General .15 5.3.2 Mechanical operation 15 5.3.3 Effe

40、ctiveness of connector coupling devices transversal15 5.3.4 Effectiveness of connector coupling devices15 5.3.5 Separation and engagement forces .15 6 Test schedule.16 6.1 General .16 6.2 Test Procedures and measuring methods16 6.3 Preconditioning .16 6.4 Wiring and mounting of specimens 16 6.4.1 Wi

41、ring16 6.4.2 Mounting .16 6.5 Arrangement for contact resistance test: .17 6.6 Arrangement for dynamic stress tests (test phase AP2).17 6.7 Basic (minimum) test schedule 17 BS EN 61076-3-116:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/07/2009 07:38, Uncontrolled Copy, (c) BSI61076-

42、3-116 IEC:2008 3 6.8 Full test schedule 17 6.8.1 Test preliminary group P17 6.8.2 Test group P18 6.8.3 Test group AP .18 6.8.4 Test group BP .20 6.8.5 Test group CP .20 6.8.6 Test group DP .21 6.8.7 Test group EP .21 Figure 1 Variant 13, fixed connector 9 Figure 2 Variant 13, free connector10 Figure

43、 3 Variant 13 mounting .11 Figure 4 Variant 13 cap for fixed connector12 Figure 5 Connector derating diagram .14 Table 1 Dimensions of fixed connector, variant 13 .10 Table 2 Dimensions of free connector, variant 13.11 Table 3 Mounting information.12 Table 4 Dimensions of cap for fixed connector var

44、iant 13.12 Table 5 Climatic categories Selected values for environmental performance level A .13 Table 6 Minimum distances13 Table 7 Test group P .18 Table 8 Test group AP Dynamic/climatic .18 Table 9 Test group BP Mechanical20 Table 10 Test group CP Continuity20 BS EN 61076-3-116:2008Licensed Copy:

45、 Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 06/07/2009 07:38, Uncontrolled Copy, (c) BSI 6 61076-3-116 IEC:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT PRODUCT REQUIREMENTS Part 3-116: Rectangular connectors Detail specification for protective housings for use with 8-way shielded and unshielded connectors

46、for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface Variant 13 related to IEC 61076-3-106 Locking lever 1 General data 1.1 Scope and object This part of IEC 61076 covers protective housings for upgrading existing 8-way shielded and unshielded conn

47、ectors utilizing the interface described in IEC 60603-7-2, IEC 60603-7-3, IEC 60603-7-4, IEC 60603-7-5, and IEC 60603-7-7 to IP65 and IP67 ratings, according to IEC 60529, for use in industrial environments. The housings cover a variety of different locking mechanisms according to this International

48、 Standard and a variety of different mounting configurations and termination types which are detailed in IEC 60603-7. Common mating configuration for all variants are defined in IEC 60603-7. The mating dimensions for the housings under Clause 3 allow the mating conditions under IEC 60603-7 to be ful

49、filled. The fully assembled variants (connectors) described in this standard incorporate fixed and free connectors which are fully compliant with IEC 60603-7. 1.2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050-5