BS EN 16590-2-2014 Tractors and machinery for agriculture and forestry Safety-related parts of control systems Concept phase《农业和林业用拖拉机和机械 控制系统的安全相关部件 概念阶段》.pdf

《BS EN 16590-2-2014 Tractors and machinery for agriculture and forestry Safety-related parts of control systems Concept phase《农业和林业用拖拉机和机械 控制系统的安全相关部件 概念阶段》.pdf》由会员分享，可在线阅读，更多相关《BS EN 16590-2-2014 Tractors and machinery for agriculture and forestry Safety-related parts of control systems Concept phase《农业和林业用拖拉机和机械 控制系统的安全相关部件 概念阶段》.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 16590-2:2014Tractors and machinery foragriculture and forestry Safety-related parts of controlsystemsPart 2: Concept phase (ISO 25119-2:2010modified)BS EN 16590-2:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16590-2:2014.It

2、 was derived from ISO 25119-2:2010. It supersedes BS ISO 25119-2:2010 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee AGE/6, Agricultural tractors and forestry machinery.A list of organizations represented on this committee can be obtained on request t

3、o its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 82329 9 ICS 35.240.99; 65.060.01 Compliance with a

4、 British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2014.Amendments issued since publicationDate T e x t a f f e c t e dBS EN 16590-2:2014EUROPEAN STANDARD NORME EUROPENNE E

5、UROPISCHE NORM EN 16590-2 April 2014 ICS 35.240.99; 65.060.01 English Version Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified) Tracteurs et matriels agricoles et forestiers - Parties des systmes de comma

6、nde relatives la scurit - Partie 2: Phase de projet (ISO 25119-2:2010 modifi) Sicherheit von Land- und Forstmaschinen - Sicherheitsbezogene Teile von Steuerungen - Teil 2: Konzeptphase (ISO 25119-2:2010 modifiziert) This European Standard was approved by CEN on 23 February 2014. CEN members are boun

7、d to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CE

8、N-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre h

9、as the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L

10、uxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Br

11、ussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16590-2:2014 EBS EN 16590-2:2014EN 16590-2:2014 (E) 2 Contents Page Foreword 5 Introduction .6 1 Scope 8 2 Normative references 8 3 Terms and definitions .8 4 Abbreviated

12、terms .8 5 Concept Unit of observation 9 5.1 Objectives .9 5.2 Prerequisites 9 5.3 Requirements .9 5.3.1 Unit of observation and ambient conditions 9 5.3.2 Limits of unit of observation and its interfaces with other units of observation . 10 5.3.3 Sources of stress 10 5.3.4 Additional determinations

13、 . 10 5.4 Work products . 11 6 Risk analysis and method description . 11 6.1 Objectives 11 6.2 Prerequisites . 11 6.3 Requirements 11 6.3.1 Procedures for preparing a risk analysis . 11 6.3.2 Tasks in risk analysis . 11 6.3.3 Participants in risk analysis 11 6.3.4 Assessment and classification of a

14、potential harm 11 6.3.5 Assessment of exposure in the situation observed . 12 6.3.6 Assessment of a possible avoidance of harm . 12 6.3.7 Selecting the required AgPLr13 6.4 Work products . 15 7 System design . 15 7.1 Objectives 15 7.2 Prerequisites . 15 7.3 Requirements 15 7.3.1 Assignment of AgPL 1

15、5 7.3.2 Achieving the required AgPLr. 16 7.3.3 Achievement of the performance level . 17 7.4 Work products . 17 Annex A (normative) Designated architectures for SRP/CS 18 A.1 General . 18 A.2 Category B (basic) 18 A.3 Category 1 . 19 A.4 Category 2 . 19 A.5 Category 3 . 20 A.6 Category 4 . 22 Annex

16、B (informative) Simplified method to estimate channel MTTFdC24 BS EN 16590-2:2014EN 16590-2:2014 (E) 3 B.1 General . 24 B.2 Component MTTFdvalues 24 B.2.1 Determination of component MTTFdvalues 24 B.2.2 MTTFdfor components from B1025 B.3 Parts count method . 25 B.4 Calculation of symmetric MTTFdCfor

17、 two-channel architectures. 26 Annex C (informative) Determination of diagnostic coverage (DC) . 27 C.1 General . 27 C.2 Estimation of the required DC 27 C.3 Estimation of channel DC . 29 C.4 Calculation of channel DC 30 C.5 Calculation of DC . 30 Annex D (informative) Estimates for common-cause fai

18、lure (CCF) . 31 Annex E (informative) Systematic failure . 33 E.1 General . 33 E.2 Procedure for the control of systematic failures . 33 E.3 Procedure for the avoidance of systematic failures 33 Annex F (informative) Characteristics of safety functions . 36 F.1 General . 36 F.2 Start interlock 36 F.

19、3 Stop function . 36 F.4 Manual reset . 36 F.5 Start and restart . 37 F.6 Response time . 37 F.7 Safety-related parameters 37 F.8 External control function 37 F.9 Muting (manual suspension of safety functions) 37 F.10 Operator warning . 37 Annex G (informative) Example of a risk analysis . 38 G.1 Wo

20、rkflow. 38 G.2 Example risk analysis of an electro-hydraulic transmission for a self-propelled working machine (forage harvester) Extract from a complete risk analysis . 38 G.2.1 System description . 38 G.2.2 Surrounding conditions 39 G.2.3 System states and transitions . 39 G.2.4 System failures 40

21、 G.3 Assessment . 41 G.3.1 System failure Stops unintentionally 41 BS EN 16590-2:2014EN 16590-2:2014 (E) 4 G.3.2 System failure Does not move when commanded . 42 G.4 Results . 42 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Machinery Directi

22、ve 2006/42/EC 43 Bibliography . 44 BS EN 16590-2:2014EN 16590-2:2014 (E) 5 Foreword This document (EN 16590-2:2014) has been prepared by Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry”, the secretariat of which is held by AFNOR. This European Standard shall be gi

23、ven the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2014, and conflicting national standards shall be withdrawn at the latest by October 2014. Attention is drawn to the possibility that some of the elements of this document ma

24、y be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of E

25、U Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. EN 16590 Tractors and machinery for agriculture and forestry Safety-related parts of control systems consists of the following parts: Part 1: General principles for design and

26、 development Part 2: Concept phase Part 3: Series development, hardware and software Part 4: Production, operation, modification and supporting processes The modifications to ISO 25119-2:2010 are indicated by a vertical line in the margin. According to the CEN/CENELEC Internal Regulations, the natio

27、nal standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lith

28、uania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16590-2:2014EN 16590-2:2014 (E) 6 Introduction EN 16590 sets out an approach to the design and assessment, for all safety life cycle activiti

29、es, of safety-relevant systems comprising electrical and/or electronic and/or programmable electronic systems (E/E/PES) on tractors used in agriculture and forestry, and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines used in agriculture. It is also applicable to mu

30、nicipal equipment. It covers the possible hazards caused by the functional behaviour of E/E/PES safety-related systems, as distinct from hazards arising from the E/E/PES equipment itself (electric shock, fire, nominal performance level of E/E/PES dedicated to active and passive safety, etc.). The co

31、ntrol system parts of the machines concerned are frequently assigned to provide the critical functions of the safety-related parts of control systems (SRP/CS). These can consist of hardware or software, can be separate or integrated parts of a control system, and can either perform solely critical f

32、unctions or form part of an operational function. In general, the designer (and to some extent, the user) will combine the design and validation of these SRP/CS as part of the risk assessment. The objective is to reduce the risk associated with a given hazard (or hazardous situation) under all condi

33、tions of use of the machine. This can be achieved by applying various protective measures (both SRP/CS and non-SRP/CS) with the end result of achieving a safe condition. EN 16590 allocates the ability of safety-related parts to perform a critical function under foreseeable conditions into five perfo

34、rmance levels. The performance level of a controlled channel depends on several factors, including system structure (category), the extent of fault detection mechanisms (diagnostic coverage), the reliability of components (mean time to dangerous failure, common-cause failure), design processes, oper

35、ating stress, environmental conditions and operation procedures. Three types of failures are considered: systematic, common-cause and random. In order to guide the designer during design, and to facilitate the assessment of the achieved performance level, EN 16590 defines an approach based on a clas

36、sification of structures with different design features and specific behaviour in case of a fault. The performance levels and categories can be applied to the control systems of all kinds of mobile machines: from simple systems (e.g. auxiliary valves) to complex systems (e.g. steer by wire), as well

37、 as to the control systems of protective equipment (e.g. interlocking devices, pressure sensitive devices). EN 16590 adopts a risk-based approach for the determination of the risks, while providing a means of specifying the required performance level for the safety-related functions to be implemente

38、d by E/E/PES safety-related channels. It gives requirements for the whole safety life cycle of E/E/PES (design, validation, production, operation, maintenance, decommissioning), necessary for achieving the required functional safety for E/E/PES that are linked to the performance levels. The structur

39、e of safety standards in the field of machinery is as follows. a) Type-A standards (basic safety standards) give basic concepts, principles for design and general aspects that can be applied to machinery. b) Type-B standards (generic safety standards) deal with one or more safety aspect(s), or one o

40、r more type(s) of safeguards that can be used across a wide range of machinery: type-B1 standards on particular safety aspects (e.g. safety distances, surface temperature, noise); type-B2 standards on safeguards (e.g. two-hand controls, interlocking devices, pressure sensitive devices, guards). c) T

41、ype-C standards (machinery safety standards) deal with detailed safety requirements for a particular machine or group of machines. BS EN 16590-2:2014EN 16590-2:2014 (E) 7 This part of EN 16590 is a type-B1 standard as stated in EN ISO 12100. For machines which are covered by the scope of a machine s

42、pecific type-C standard and which have been designed and built according to the provisions of that standard, the provisions of that type-C standard take precedence over the provisions of this type-B standard. BS EN 16590-2:2014EN 16590-2:2014 (E) 8 1 Scope This part of EN 16590 specifies the concept

43、 phase of the development of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry, and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines used in agriculture. It can also be applied to municipal equipment (e.g. street-sweeping m

44、achines). It specifies the characteristics and categories required of SRP/CS for carrying out their safety functions. This part of EN 16590 is applicable to the safety-related parts of electrical/electronic/programmable electronic systems (E/E/PES), as these relate to mechatronic systems. It does no

45、t specify which safety functions, categories or performance levels are to be used for particular machines. Machine specific standards (type-C standards) can identify performance levels and/or categories or they should be determined by the manufacturer of the machine based on risk assessment. It is n

46、ot applicable to non-E/E/PES systems (e.g. hydraulic, mechanic or pneumatic). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated

47、references, the latest edition of the referenced document (including any amendments) applies. EN 16590-1:2014, Tractors and machinery for agriculture and forestry Safety-related parts of control systems Part 1: General principles for design and development EN 16590-3:2014, Tractors and machinery for

48、 agriculture and forestry Safety-related parts of control systems Part 3: Series development, hardware and software 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 16590-1:2014 apply. 4 Abbreviated terms For the purposes of this document, the followin

49、g abbreviated terms apply. ADC analogue to digital converter AgPL agricultural performance level AgPLrrequired agricultural performance level CAD computer-aided design Cat hardware category CCF common-cause failure CRC cyclic redundancy check DC diagnostic coverage DCavgaverage diagnostic coverage ECU electronic control unit ETA event tree analysis E/E/PES electrical/electronic/programmable electronic systems BS EN 16590-2:2014EN 16590-2:2014 (E) 9 EMC electromagnetic compatibility EUC equipment under control FMEA failure mode and effects analys