BS EN 13880-4-2003 Hot applied joint sealants - Test method for the determination of heat resistance - Change in penetration value《热用密封胶 耐热性测定的试验方法 穿透值的变化》.pdf

《BS EN 13880-4-2003 Hot applied joint sealants - Test method for the determination of heat resistance - Change in penetration value《热用密封胶 耐热性测定的试验方法 穿透值的变化》.pdf》由会员分享，可在线阅读，更多相关《BS EN 13880-4-2003 Hot applied joint sealants - Test method for the determination of heat resistance - Change in penetration value《热用密封胶 耐热性测定的试验方法 穿透值的变化》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 13880-4:2003 Hot applied joint sealants Part 4: Test method for the determination of heat resistance Change in penetration value The European Standard EN 13880-4:2003 has the status of a British Standard ICS 93.080.20 BS EN 13880-4:2003 This British Standard, was published und

2、er the authority of the Standards Policy and Strategy Committee on 18 June 2003 BSI 18 June 2003 ISBN 0 580 42097 3 National foreword This British Standard is the official English language version of EN 13880-4:2003. The UK participation in its preparation was entrusted by Technical Committee B/510,

3、 Road materials, to Subcommittee B/510/3, Materials for concrete roads, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications

4、 referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary

5、provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpreta

6、tion, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back co

7、ver. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN138804 June2003 ICS93.080.20 Englishversion HotappliedjointsealantsPart4:Testmethodforthe det

8、erminationofheatresistanceChangeinpenetrationvalue ProduitsdescellementdejointsappliquschaudPartie 4:Mthodedessaipourladterminationdelarsistance lchaleurVariationdelapntrabilit HeiverarbeitbareFugenmassenTeil4:Prfverfahren zurBestimmungderWrmebestndigkeitnderungder KonusPenetration ThisEuropeanStand

9、ardwasapprovedbyCENon25March2003. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplica

10、tiontotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersaret

11、henationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,SwitzerlandandUn ited Kingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESK

12、OMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2003CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN138804:2003EEN138804:2003(E) 2 Contents page Foreword3 1 Scope 4 2 Normativereferences 4 3 Termanddefinition. .4 4 Principle4 5 Appara

13、tus .4 6 Procedure .4 6.1 Conepenetration .4 6.2 Penetrationandrecovery(resilience). .5 6.3 Testconditionsforstorageatelevatedtemperature. 5 6.4 Conditioningafterstorageatelevatedtemperature 5 7 Expressionofresults . .5 8 Precision.5 9 Testreport . .5 Bibliography 6EN138804:2003(E) 3 Foreword Thisdo

14、cument(EN138804:2003)hasbeenpreparedbyTechnicalCommitteeCEN/TC227“Roadmaterials“,the secretariatofwhichisheldbyDIN. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidenticaltextor byendorsement,atthelatestbyDecember2003,andconflictingnationalstandardsshallbewithdr

15、awnatthelatest byMarch2005. ThisEuropeanStandardisoneofaseriesofstandardsaslistedbelow: prEN138801 HotappliedjointsealantsPart1:Testmethodforthedeterminationofdensityat25C prEN138802 HotappliedjointsealantsPart2:Testmethodforthedeterminationofconepenetrationat 25C EN138803 HotappliedjointsealantsPar

16、t3:Testmethodforthedeterminationofpenetrationand recovery(resilience) EN138804 HotappliedjointsealantsPart4:Testmethodforthedeterminationofheatresistance Changeinpenetrationvalue prEN138805 HotappliedjointsealantsPart5:Testmethodforthedeterminationofflowresistance prEN138806 HotappliedjointsealantsP

17、art6:Testmethodforthepreparationofsamplesfortesting prEN138807 HotappliedjointsealantsPart7:Functiontestingofjointsealants prEN138808 HotappliedjointsealantsPart8:Testmethodforthedeterminationofthechangeinweight offuelresistancejointsealantsafterfuelimmersion EN138809 HotappliedjointsealantsPart9:Te

18、stmethodforthedeterminationofcompatibilitywith asphaltpavements prEN1388010 HotappliedjointsealantsPart10:Testmethodforthedeterminationofadhesionand cohesionfollowingcontinuousextensionandcompression EN1388011 HotappliedjointsealantsPart11:Testmethodforthepreparationofasphalttestblocks usedinthefunc

19、tiontestandforthedeterminationofcompatibilitywithasphaltpavement s prEN1388012 HotappliedjointsealantsPart12:Testmethodforthemanufactureofconcretetestblocks forbondtesting(recipemethods) prEN1388013 HotappliedjointsealantsPart13:Testmethodforthedeterminationofthediscontinuous extension(adherencetest

20、) AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark,Finland, France,Germany,Greece,Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal, Slovakia,Sp

21、ain,Sweden,SwitzerlandandtheUnitedKingdom.EN138804:2003(E) 4 1Scope ThisEuropeanStandarddescribesamethodfordeterminingtheeffectsofstorageatelevatedtemperatureson samplesofhotappliedjointsealantsbycomparingtheconepenetrationandresiliencevaluesbeforeandafter storage. 2 Normativereferences ThisEuropean

22、Standardincorporatesbydatedorundatedreference,provisionsfromotherpublications.These normativereferencesarecitedattheappropriateplacesinthetext,andthepublicationsarelistedhereafter.For datedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothisEuropean Standardonlywhenincorpo

23、ratedinitbyamendmentorrevision.Forundatedreferencesthelatesteditionofthe publicationreferredtoapplies(includingamendments). prEN138802:2000, HotappliedjointsealantsPart2:Testmethodforthedeterminationofconepenetrationat 25C. EN138803:2003, HotappliedjointsealantsPart3:Testmethodforthedeterminationofp

24、enetrationand recovery(resilience). ISO188, Rubber,vulcanizedorthermoplasticAcceleratedageingandheatresistancetests. 3 Termanddefinition ForthepurposesofthisEuropeanStandardthefollowingtermanddefinitionapplies: 3.1 changeinpenetrationvalue changeoftheconepenetrationandresiliencebeforeandafterstorage

25、atelevatedtemperature 4Principle Aportionofthelaboratorysampleispouredintometalcontainerstoprovidethetestspecimensforexamination. Twospecimensareplacedinaovenatatemperatureof(70 1)Cforaperiodof(168 2)h,thencooledinair andconditionedinthewaterbathat(25,0 0,1)C.Afterconditioning,thespecimensaretestedt

26、odeterminethe conepenetrationandresiliencevalues. ThetestresultsobtainedbeforeandafterstorageatelevatedtemperaturearereportedaccordingtoprEN13 8802 andEN138803. 5Apparatus 5.1 Laboratoryoven complyingwithISO188andcapableofmaintainingthespecimensatatemperatureof (70 1)C. 6Procedure 6.1 Conepenetratio

27、n DeterminetheconepenetrationbeforeandafterstorageatelevatedtemperatureaccordingtoprEN138802.EN138804:2003(E) 5 6.2 Penetrationandrecovery(resilience) Determinethepenetrationandrecovery(resilience)beforeandafterstorageatelevatedtemperatureaccordingto EN138803. 6.3 Testconditionsforstorageatelevatedt

28、emperature Storethetestspecimensintheovenaccordingto5.1at(70 2)h. 6.4 Conditioningafterstorageatelevatedtemperature Removethespecimensafterthestorageandprotectthemagainstdustandallowtocoolinairatatemperatureof (23 2)Cforaperiodof(1,75 0,25)h. 7 Expressionofresults 7.1 Reportthetestresultsfortheconep

29、enetrationbeforeandafterstorageatelevatedtemperaturein0,1mm accordingtoprEN138802:2000,clause9. 7.2 Reportthetestresultsoftherecovery Rbeforeandafterstorageatelevatedtemperature,calculatedac cordingtoEN138803:2003,clause9. 8Precision Estimatesoftherepeatabilityandreproducibilityofthistestmethodandof

30、thevariabilityduetosamplingarenot availableasyetbuttheywillbeincludedbyamendmentwhenknown. 9 Testreport ThetestreportshallstatethatthetestwascarriedoutinaccordancewiththisEuropeanStandardandshallinclude thefollowinginformation: a) nameofsample; b) sourceofsample; c) batchnumberanddateofmanufacturewh

31、ereappropriateorexpirydate; d) thedateoftestingandresultsobtained; e) thenameoftheanalystandtestlaboratory.EN138804:2003(E) 6 Bibliography prEN138806, HotappliedjointsealantsPart6:Testmethodforthepreparationofsamplesfortesting.blankBS EN 13880-4:2003 BSI 389 Chiswick High Road London W4 4AL BSI Brit

32、ish Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of B

33、ritish Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of

34、the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.

35、Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for intern

36、ational standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Tec

37、hnical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date wi

38、th standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standar

39、ds via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodi

40、es. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free

41、use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.