BS EN 13312-6-2001 Biotechnology - Performance criteria for piping and instrumentation - Equipment probes《生物技术 管道和仪表性能标准 设备探头》.pdf

《BS EN 13312-6-2001 Biotechnology - Performance criteria for piping and instrumentation - Equipment probes《生物技术 管道和仪表性能标准 设备探头》.pdf》由会员分享，可在线阅读，更多相关《BS EN 13312-6-2001 Biotechnology - Performance criteria for piping and instrumentation - Equipment probes《生物技术 管道和仪表性能标准 设备探头》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 13312-6:2001 Biotechnology Performance criteria for piping and instrumentation Part 6: Equipment probes The European Standard EN 13312-6:2001 has the status of a British Standard ICS 07.080; 07.100.01 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN

2、13312-6:2001 This British Standard, having been prepared under the direction of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Committee and comes into effect on 15 April 2001 BSI 04-2001 ISBN 0 580 37461 0 National foreword This British Standard

3、 is the official English language version of EN 13312-6:2001. The UK participation in its preparation was entrusted to Technical Committee CII/58, Biotechnology, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-

4、references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic

5、Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand th

6、e text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an in

7、side front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN133126 F

8、ebruary2001 ICS07.080;07.100.01 Englishversion BiotechnologyPerformancecriteriaforpipingand instrumentationPart6:Equipmentprobes BiotechnologieCritresdeperformancepourtuyauteries etinstrumentationPartie6:Sondesdinstrumentation BiotechnikLeistungskriterienfrLeitungssystemeund InstrumentierungTeil6:Ge

9、rtesonden ThisEuropeanStandardwasapprovedbyCENon13January2001. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational st

10、andardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe offi

11、cial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISC

12、HESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2001CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN133126:2001EPage2 EN133126:2001 Contents Page Foreword. 3 Introduction 4 1 Scope. 4 2 Normativereferences . 4 3 Termsanddefinition

13、s. 4 4 Hazards 5 5 Performanceclasses 5 6 Classificationandverificationofperformance. 5 7 Markingandpackaging 6 8 Documentation6 AnnexA(informative)Guidanceontestmethodsfordetermining leaktightnessofequipmentprobes 7 Bibliography .8Page3 EN133126:2001 Foreword ThisdraftEuropeanStandardhasbeenprepare

14、dbytheTechnicalCommitteeCEN/TC233 “Biotechnology“,thesecretariatofwhichisheldbyAFNOR. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherby publicationofanidenticaltextorbyendorsement,atthelatestbyAugust2001,and conflictingnationalstandardsshallbewithdrawnatthelatestbyAugust2001. Thi

15、sEuropeanStandardhasbeenpreparedunderamandategiventoCENbythe EuropeanCommissionandtheEuropeanFreeTradeAssociation. ThisstandardisoneofaseriesofEuropeanStandardsconcernedwithperformancecriteria forpipingandinstrumentation.Thesestandardsare: EN133121, BiotechnologyPerformancecriteriaforpipingandinstru

16、mentationPart1: Generalperformancecriteria. EN133122, BiotechnologyPerformancecriteriaforpipingandinstrumentationPart2: Couplings. EN133123, BiotechnologyPerformancecriteriaforpipingandinstrumentationPart3: Samplingandinoculationdevices. EN133124, BiotechnologyPerformancecriteriaforpipingandinstrume

17、ntationPart4: Tubesandpipes. EN133125, BiotechnologyPerformancecriteriaforpipingandinstrumentationPart5: Valves. EN133126, BiotechnologyPerformancecriteriaforpipingandinstrumentationPart6: Equipmentprobes. Thisstandardincludesabibliography. AccordingtotheCEN/CENELECInternalRegulations,thenationalsta

18、ndardsorganizations ofthefollowingcountriesareboundtoimplementthisEuropeanStandard:Austria,Belgium, CzechRepublic,Denmark,Finland,France,Germany,Greece,Iceland,Ireland,Italy, Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandtheUnited Kingdom.Page4 EN133126:2001 Introduction Equipmen

19、tprobesaredevicesusedtomeasureprocessparameterssuchaspH, concentrationofoxygen,biomassandothersubstratesandproducts,temperature, pressure,foamlevelandconductivity.Theyareinsertedintoapieceofequipmentthrough thebarrierthatenclosestheclosedsystem.Thereforeprobescanbeindirectcontactwith themicroorganis

20、msbeingusedintheprocess. Usuallyameasuringsystemorameasuringchainconsistsofaequipmentprobecontaining asensor,asignaltransmitterandasignalindicator.Themeasuringsystemcanbestand aloneorcoupledtoamonitoringandcontrolsystem. Theperformancecriteriacleanabilityandsterilizabilitywillbeinfluencedbythedesign

21、ofthe probe,whereasthecriterionleaktightnesswillbemainlyinfluencedbythewaytheprobeis housedintheequipment. UseofthisEuropeanStandardwillaidtheequipmentmanufacturerintheclassificationof equipmentprobeswithregardtosafeperformanceinbiotechnologicalprocesses.The classificationiseasilyunderstandableandre

22、adilyutilizablebytheuserandtheregulatory authorities. 1 Scope ThisEuropeanStandardspecifiesperformancecriteriaforequipmentprobesusedin biotechnologicalprocesseswithrespecttothepotentialhazardstotheworkerandthe environmentfrommicroorganismsinuse. ThisEuropeanStandardapplieswheretheintendeduseoftheequ

23、ipmentprobesincludes hazardousorpotentiallyhazardousmicroorganismsusedinbiotechnologicalprocessesor whereexposureoftheworkerortheenvironmenttosuchmicroorganismsisrestrictedfor reasonsofsafety. 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreference,provisionsfromother publica

24、tions.Thesenormativereferencesarecitedattheappropriateplacesinthetextand thepublicationsarelistedhereafter.Fordatedreferences,subsequentamendmentstoor revisionsofanyofthesepublicationsapplytothisEuropeanStandardonlywhen incorporatedinitbyamendmentorrevision.Forundatedreferencesthelatesteditionofthe

25、publicationreferredtoapplies(includingamendments). EN133121:2001, BiotechnologyPerformancecriteriaforpipingandinstrumentationPart 1:Generalperformancecriteria. 3 Termsanddefinitions Forthepurposesofthisstandard,thetermsanddefinitionsgiveninEN133121:2001 apply.Page5 EN133126:2001 4 Hazards Thefollowi

26、nghazardsshallbetakenintoaccount. a)Releaseofmicroorganismscausedbynoncompatibilityofequipmentprobesand ports. b)Releaseofmicroorganismscausedbydeteriorationofthegasket. c)Releaseofmicroorganismscausedbyimproperreplacementofgaskets. d)Releaseofmicroorganismscausedbylooseningoftheequipmentprobe. e)Re

27、leaseofmicroorganismscausedbybreakageoftheequipmentprobe. f)Releaseofmicroorganismscausedbytransportofmicroorganismsthroughthebarrier oftheclosedsystemifthepositionofaslidingequipmentprobeisadjusted. Hazardsmentionedundera),b),c)andd)arediscussedinmoredetailinEN133122(see 1)andEN133123(see2). Althou

28、ghthisstandarddoesnotapplytotheconsequencesofmalfunctioningofthe measuringsystemofwhichtheequipmentprobeispart,thefollowingshallbetakeninto account: releaseofmicroorganismscanoccurcausedbymalfunctioningofthemeasuring system,leadingtonoorincorrectactionsbasedonmisinformation; releaseofmicroorganismsw

29、henopeningordismantlingtheequipmentcausedby inadequateinactivationprocedureresultingfrommalfunctioningofpressureand/or temperatureindicators. 5 Performanceclasses Theequimentprobeshallbeclassifiedforleaktightness,cleanabilityandsterilizabilityin accordancewith5.1to5.4ofEN133121:2001. Theselectionoft

30、heappropriateclassforperformanceofanequipmentprobeshallbemade inaccordancewith5.5ofEN133121:2001. 6 Classificationandverificationofperformance 6.1 General Theequipmentprobesshallconformtothegeneralrequirementsgivenin6.1ofEN13312 1:2001.Page6 EN133126:2001 6.2 Leaktightness Theequipmentprobesshallcon

31、formtotherequirementsgivenin6.2ofEN133121:2001. GuidanceontestmethodsfordeterminingleaktightnessofequipmentisgiveninannexA. NOTEGenerallyequipmentprobesaredesignedtobeleaktighttoaspecified maximumpressureandmaybeverifiedbypressuretestingwhennecessary. Pressuretestingaloneisnotproofofleaktightnessfor

32、microbiologicaluse. 6.3 Cleanability Theequipmentprobesshallconformtotherequirementsgivenin6.3ofEN133121:2001. 6.4 Sterilizability Theequipmentprobesshallconformtotherequirementsgivenin6.4ofEN133121:2001. 7 Markingandpackaging Theequipmentprobesshallconformtotherequirementsgivenin clause7ofEN13312 1

33、:2001. 8 Documentation Theequipmentprobesshallconformtotherequirementsgivenin clause8ofEN13312 1:2001.Page7 EN133126:2001 AnnexA(informative) Guidanceontestmethodsfordeterminingleaktightnessofequipmentprobes AlistoftestmethodsforleaktightnessisgivenintableA.1ofEN12298:1998(see3). Fromthatlistsuitabl

34、etestmethodstothetestingofequipmentprobesaregivenintable A.1. TableA.1Suitablealternativeleaktightnesstestmethodsforequipmentprobes Number Testmethod 1 Pressurelossgas/air 2 Pressurelossliquid 5 Thermalconductivity 11 Electronicparticlecounting 12 Traceraerosol(NaCl) 14 Qualitativebioaerosolmonitori

35、ng 15 QuantitativebioaerosolmonitoringPage8 EN133126:2001 Bibliography 1 EN133122, BiotechnologyPerformancecriteriaforpipingandinstrumentation Part2:Couplings. 2 EN133123, BiotechnologyPerformancecriteriaforpipingandinstrumentation Part3:Samplingandinoculationdevices. 3 EN12298:1998, BiotechnologyEq

36、uipmentGuidanceontestingproceduresfor leaktightness.blankBS EN 13312-6:2001 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the internati

37、onal level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We wo

38、uld be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual upd

39、ating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also

40、available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information

41、 on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 70

42、48. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is ava

43、ilable on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reprodu

44、ced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, ty

45、pe or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.