BS EN 536-2015 Road construction machines Mixing plants for road construction materials Safety requirements《道路施工机械 道路施工材料用混合设备 安全要求》.pdf

《BS EN 536-2015 Road construction machines Mixing plants for road construction materials Safety requirements《道路施工机械 道路施工材料用混合设备 安全要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 536-2015 Road construction machines Mixing plants for road construction materials Safety requirements《道路施工机械 道路施工材料用混合设备 安全要求》.pdf（64页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 536:2015Road construction machines Mixing plants for roadconstruction materials Safety requirementsBS EN 536:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 536:2015. Itsupersedes BS EN 536:1999 which is withdrawn.The UK parti

2、cipation in its preparation was entrusted to TechnicalCommittee B/513/1, Earth moving machinery (International).A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Use

3、rs are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 81774 8ICS 93.080.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of t

4、heStandards Policy and Strategy Committee on 31 August 2015.Amendments issued since publicationDate Text affectedBS EN 536:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 536 August 2015 ICS 93.080.10 Supersedes EN 536:1999English Version Road construction machines - Mixing plants for road

5、construction materials - Safety requirements Machines pour la construction des routes - Centrales denrobage pour matriaux routiers - Prescriptions de scurit Straenbaumaschinen - Mischanlagen fr Materialien zum Straenbau - Sicherheitsanforderungen This European Standard was approved by CEN on 3 July

6、2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtaine

7、d on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-C

8、ENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, I

9、taly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: A

10、venue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 536:2015 EBS EN 536:2015EN 536:2015 (E) 2 Contents Page European foreword .5 Introduction .6 1 Scope 7 2 Normative references 7 3 Terms and defin

11、itions .9 4 List of significant hazards . 12 5 Safety requirements and/or measures . 15 5.1 General . 15 5.2 Means of access . 15 5.2.1 General . 15 5.2.2 Mobile plants . 15 5.2.3 Openings . 16 5.3 Guards . 17 5.3.1 General . 17 5.3.2 Fixed guards 17 5.3.3 Interlocking devices and interlocking devic

12、es with guard locking . 17 5.4 Electrical installation 18 5.4.1 General . 18 5.4.2 Electrical cables 18 5.4.3 Earthing . 18 5.4.4 Isolation for maintenance purposes . 18 5.5 Pneumatic 18 5.5.1 General . 18 5.5.2 Energy isolation and dissipation 18 5.6 Hydraulic 19 5.6.1 General . 19 5.6.2 Isolation

13、and energy dissipation . 19 5.7 Emergency stops 19 5.8 Hot parts 19 5.9 Piping . 19 5.9.1 General . 19 5.9.2 Piping for hot liquids 20 5.10 Control stations 20 5.10.1 General . 20 5.10.2 Main control station 20 5.10.3 Starting 20 5.10.4 Stopping 20 5.10.5 Restarting 21 5.10.6 Troubleshooting 21 5.10

14、.7 Maintenance mode 21 5.10.8 Alarms and warnings . 21 5.11 Materials sampling 21 5.12 Restricted areas 22 5.13 Lifting, tie down and transport 22 5.13.1 General . 22 5.13.2 Design of attachment points for transportation purpose . 22 5.13.3 Location of tying-down and lifting attachment points for tr

15、ansportation purpose . 22 BS EN 536:2015EN 536:2015 (E) 3 5.13.4 Identification of tying-down and lifting attachment points for transportation purpose 23 5.13.5 Other lifting attachment points for handling purpose of components or other sub-assemblies . 23 5.14 Transportable and mobile machines - Er

16、ecting equipment 23 5.15 Equipment for storage of constituent materials 23 5.15.1 Silos 23 5.15.2 Tanks 24 5.16 Equipment for handling of constituent materials 25 5.16.1 Conveyor belts . 25 5.16.2 Vibrating scalping screen . 26 5.16.3 Rotating drums 26 5.16.4 Bucket elevator 28 5.16.5 Screw conveyor

17、s . 29 5.16.6 Rotary valve . 29 5.16.7 Manually introduced additives . 29 5.16.8 Screen . 29 5.16.9 Hot aggregates storage 30 5.16.10 Equipment for metering 30 5.16.11 Water steam duct . 31 5.16.12 Mixer . 31 5.16.13 Mixing tower exhaustion . 31 5.16.14 Lifting equipment 31 5.17 Equipment for handli

18、ng of mixed material . 31 5.17.1 Transfer skips 31 5.17.2 Skip Hoists . 32 5.17.3 Drag slat conveyor 35 5.18 Burner . 35 5.19 Exhaust system . 36 5.19.1 Exhaust fans 36 5.19.2 Dust collector . 36 5.20 Safety signs . 36 5.21 Hazard generated by noise . 37 5.21.1 Noise reduction at source at the desig

19、n stage. 37 5.21.2 Noise reduction by protective devices 37 5.21.3 Noise reduction by information . 37 6 Verification of safety requirements and/or measures . 37 7 Information for use 38 7.1 General . 38 7.2 Information for the foundations . 38 7.3 Erection and transport instructions 39 7.3.1 Erecti

20、on 39 7.3.2 Transport 39 7.4 Instructions for use . 39 7.5 Information for maintenance 39 7.6 Tools and equipment 40 7.7 Spare parts and wear parts 40 7.8 Troubleshooting 40 7.9 Procedure in case of fire. 40 8 Marking . 40 8.1 Machine plate . 40 8.2 Thermal heaters . 41 8.3 Tanks and vessels . 41 An

21、nex A (normative) Minimum passage openings 42 A.1 Passage of the body 42 BS EN 536:2015EN 536:2015 (E) 4 Annex B (normative) Noise test code Grade 2 . 43 B.1 Scope . 43 B.2 Determination of A-weighted emission sound pressure levels on a contour 43 B.2.1 Measurement method . 43 B.2.2 Measurement posi

22、tions on the contour . 43 B.2.3 Measurement procedure 44 B.3 Determination of the A-weighted emission sound pressure level at workstations . 45 B.3.1 Workstations . 45 B.3.2 Measurement procedure 45 B.4 Measurement uncertainty 45 B.5 Installation conditions 46 B.6 Operating conditions 46 B.7 Informa

23、tion to be recorded 46 B.8 Information to be reported . 46 B.9 Declaration of noise emission values 46 Annex C (informative) Examples for asphalt mixing plants and terminology 48 C.1 Stationary plant . 48 C.2 Transportable plant 49 C.3 Mobile plant . 49 C.3.1 Mobile plant assembled . 49 C.3.2 Mobile

24、 plant during transportation . 50 C.4 Batch plant 50 C.5 Continuous plant 52 Annex D (normative) Movable gratings 54 D.1 General . 54 D.2 Safety requirements . 54 D.2.1 General . 54 D.2.2 Access . 54 D.2.3 Controls . 54 D.2.4 Maintenance 54 Annex E (informative) Pictorials . 56 E.1 Examples . 56 Ann

25、ex F (normative) Performance levels of the safety related parts of control system . 58 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC . 59 Bibliography . 60 BS EN 536:2015EN 536:2015 (E) 5 European foreword This document (

26、EN 536:2015) has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines - Safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endors

27、ement, at the latest by February 2016, and conflicting national standards shall be withdrawn at the latest by February 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for iden

28、tifying any or all such patent rights. This document supersedes EN 536:1999. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s),

29、 see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmar

30、k, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 536:2015EN

31、 536:2015 (E) 6 Introduction This European Standard is a type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards are covered are indicated in the scope of this standard. BS EN 536:2015EN 536:2015 (E) 7 1 Scope This European Standard specifies the safety req

32、uirements applicable to stationary and relocatable mixing plants for the production of materials (e.g. hot-mix asphalt, cold-mix asphalt, cement gravel) used for the construction and maintenance of traffic routes (roads, highways, sidewalks, airfields, etc.) water retaining works, dam walls, culvert

33、s, etc. This European Standard applies to the following types of mixing plant: a) hot asphalt mixing plant; b) cold mixing plant (e.g. for production of cement gravel, cold mix asphalt); c) mixing plant for bituminous or non-bituminous reclaimed materials; d) mixing plant for mastic asphalt, also in

34、cluding natural asphalt. Machines moving during the working process (e.g. mobile mastic asphalt mixers) and crushers are not covered by this European Standard. Those types of asphalt mixing plants can also be combined or enlarged by additional installations (e.g. Plant for storage of binders (e.g. b

35、ituminous, synthetic, vegetal). This European Standard deals with all significant hazards pertinent to mixing plants, when they are used as intended and under the conditions of misuse which are reasonably foreseen by the manufacturer (see Clause 4). This European Standard specifies the appropriate t

36、echnical measures to eliminate or reduce risks arising from the significant hazards. This European Standard does not apply to machines for the production of cement concrete and mortar as covered in EN 12151. This European Standard does not deal with hazards caused by flammable gases. As soon as info

37、rmation is available it will be included. This European Standard is not applicable to mixing plants for road construction materials, which are manufactured before the date of publication of this European Standard by CEN. 2 Normative references The following documents, in whole or in part, are normat

38、ively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 547-1:1996+A1:2008, Safety of machinery Human body measureme

39、nts Part 1: Principles for determining the dimensions required for openings for whole body access into machinery EN 547-2:1996+A1:2008, Safety of machinery Human body measurements Part 2: Principles for determining the dimensions required for access openings EN 618:2002+A1:2010, Continuous handling

40、equipment and systems Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors EN 620:2002+A1:2010, Continuous handling equipment and systems Safety and EMC requirements for fixed belt conveyors for bulk materials BS EN 536:2015EN 536:2015 (E) 8

41、 EN 746-1:1997+A1:2009, Industrial thermoprocessing equipment Part 1: Common safety requirements for industrial thermoprocessing equipment EN 795:2012, Personal fall protection equipment Anchor devices EN 842:1996+A1:2008, Safety of machinery Visual danger signals General requirements, design and te

42、sting EN 953:1997+A1:2009, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards EN 1037:1995+A1:2008, Safety of machinery Prevention of unexpected start-up EN 12600:2002, Glass in building Pendulum test Impact test method and classification for

43、flat glass EN 13482:2013, Rubber hoses and hose assemblies for asphalt and bitumen Specification EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 6204-1:2005, modified) EN 60529:1991, Degrees of protection provided by enclosures (IP Code) (IEC 6

44、0529:1989) EN ISO 4413:2010, Hydraulic fluid power General rules and safety requirements for systems and their components (ISO 4413:2010) EN ISO 4414:2010, Pneumatic fluid power General rules and safety requirements for systems and their components (ISO 4414:2010) EN ISO 4871:2009, Acoustics Declara

45、tion and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 7010:2012, Graphical symbols Safety colours and safety signs Registered safety signs (ISO 7010:2011) EN ISO 7731:2008, Ergonomics Danger signals for public and work areas Auditory danger signals (ISO 773

46、1:2003) EN ISO 11201:2010, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) EN ISO 1168

47、8-1:2009, Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning (ISO/TR 11688-1:1995) EN ISO 12100:2010, Safety of machinery General principles for design Risk assessment and risk reduction (ISO 12100:2010) EN ISO 13732-1:2008, Ergonomics of the thermal

48、environment Methods for the assessment of human responses to contact with surfaces Part 1: Hot surfaces (ISO 13732-1:2006) EN ISO 13849-1:2008, Safety of machinery Safety-related parts of control systems Part 1: General principles for design (ISO 13849-1:2006) EN ISO 13850:2008, Safety of machinery

49、Emergency stop Principles for design (ISO 13850:2006) EN ISO 13857:2008, Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) BS EN 536:2015EN 536:2015 (E) 9 EN ISO 14119:2013, Safety of machinery Interlocking devices associated with guards Principles for design and selection (ISO 14119:2013) EN ISO 14122-1:2001, Safety of machinery Permanent means of access to machinery Part 1: Choice of fixed means of access between two leve