BS 6356-7-1993 Spraying equipment for crop protection - Guide for typical data sheet layout《农作物保护用喷雾设备 典型数据表设计指南》.pdf

《BS 6356-7-1993 Spraying equipment for crop protection - Guide for typical data sheet layout《农作物保护用喷雾设备 典型数据表设计指南》.pdf》由会员分享，可在线阅读，更多相关《BS 6356-7-1993 Spraying equipment for crop protection - Guide for typical data sheet layout《农作物保护用喷雾设备 典型数据表设计指南》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 6356-7: 1993 Spraying equipment for crop protection Part 7: Guide for typical data sheet layoutBS6356-7:1993 This British Standard, having been prepared under the directionof the Agricultural Machinery and Implements Standards Policy Committee, waspublished under the authorityof

2、the Standards Boardand comes intoeffecton 15February1993 BSI 08-1999 The following BSI references relate to the work on this standard: Committee reference AGE/15 Draft for comment 90/81568 DC ISBN 0 580 21577 6 Committees responsible for this British Standard The preparation of this British Standard

3、 was entrusted by the Agricultural Machinery and Implements Standards Policy Committee (AGE/-) to Technical Committee AGE/15, upon which the following bodies were represented: Agricultural Engineers Association British Agrochemicals Association Ltd. British Crop Protection Council British Plastics F

4、ederation Health and Safety Executive Imperial College of Science and Technology Long Ashton Research Station Ministry of Agriculture, Fisheries and Food National Farmers Union Silsoe Research Institute Amendments issued since publication Amd. No. Date CommentsBS6356-7:1993 BSI 08-1999 i Contents Pa

5、ge Committees responsible Inside front cover Foreword ii 1 Scope 1 2 Normative references 1 3 Data sheet typical layout 1 Figure 1 Dimensions 3 List of references Inside back coverBS6356-7:1993 ii BSI 08-1999 Foreword This British Standard has been prepared under the direction of the Agricultural Ma

6、chinery and Implements Standards Policy Committee. It is related to ISO10627-1:1992 Agricultural sprayers Data sheet Part 1: Typical layout, published by the International Organization for Standardization (ISO). ISO10627-1:1992 was prepared by Technical Committee ISO/TC 23 Tractors and machinery for

7、 agriculture and forestry, subcommittee SC 6 Equipment for crop protection. The differences between this Part of BS6356 and ISO10627-1 are as follows: In3.6.1 reference to ISO2288 has been omitted in respect of output because the ISO test method is not used in the UK. In3.8 Pumps, a reference to max

8、imum pressure has been added. In 3.8 Pumps, and 3.9 Filling sprayer tank, reference to ISO5682-2 has been omitted because the test powder used in ISO 5682-2 is not an approved pesticide in the UK. In3.10 Filters, mesh size has been substituted for wire diameter as mesh size is more informative. A Br

9、itish Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a fr

10、ont cover, an inside front cover, pages i and ii, pages1 to 14, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS6356-7:1993 BSI 08-1999 1 1 S

11、cope This Part of BS6356 gives guidance for the presentation of a typical data sheet layout, for the preparation of documents giving the dimensions and performance of non-air-assisted agricultural sprayers. It applies to preparation of data sheets by manufacturers and importers of non-air-assisted a

12、gricultural sprayers, whether mounted, trailed or self-propelled, used for the protection and/or fertilization of crops. NOTEFor the purposes of this Part of BS6356, the definitions given in BS6355:1983 apply. 2 Normative references This Part of BS6356 incorporates, by reference, provisions from spe

13、cific editions of other publications. These normative references are cited at the appropriate points in the text and the publications are listed on the inside back cover. Subsequent amendments to, or revisions of, any of these publications apply to this Part of BS6356 only when incorporated in it by

14、 updating or revision. 3 Data sheet typical layout 3.1 GeneralBS6356-7:1993 2 BSI 08-1999 3.2 Dimensions (seeFigure 1)BS6356-7:1993 BSI 08-1999 3 Figure 1 DimensionsBS6356-7:1993 4 BSI 08-1999 3.3 Masses 3.4 Tyres 3.5 Brakes Mass on drawbar Mass on wheels Total mass Front axle mass Rear axle mass To

15、tal mass kg kg kg kg kg kgBS6356-7:1993 BSI 08-1999 5 3.6 Self-propelled equipment Other specifications 3.6.1 Engine 3.6.2 TransmissionBS6356-7:1993 6 BSI 08-1999 3.6.3 Driving position 3.6.4 Other equipment 3.6.5 Optional equipment (To be listed)BS6356-7:1993 BSI 08-1999 7 3.7 Sprayer tank 3.7.1 Ge

16、neral specifications 3.7.2 Tank discharge 3.7.3 Tank level gaugeBS6356-7:1993 8 BSI 08-1999 3.7.4 Tank access arrangement 3.8 Pumps 3.8.1 Main pump 1)The preparation of a European standard, taking account of ISO4254-1 is currently under discussion in CEN.BS6356-7:1993 BSI 08-1999 9 3.8.2 Auxiliary p

17、ump 3.9 Filling sprayer tank 3.9.1 With water 3.9.2 With pesticidesBS6356-7:1993 10 BSI 08-1999 3.10 FiltersBS6356-7:1993 BSI 08-1999 11 3.11 Stirrer 3.12 ControlBS6356-7:1993 12 BSI 08-1999 3.13 DistributionBS6356-7:1993 BSI 08-1999 13 3.14 BoomBS6356-7:1993 14 BSI 08-1999 3.15 Nozzles 3.16 Instruc

18、tion manual and parts listBS6356-7:1993 BSI 08-1999 List of references (see clause 2) Normative references BSI standards publications BRITISH STANDARDS INSTITUTION, London BS 6347, Performance assessment of agricultural tractors. BS 6347-3:1983, Method for determination of turning and clearance diam

19、eters. BS 6355:1983, Glossary of terms for equipment for crop protection. BS 6356-7: 1993 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the

20、 international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and service

21、s. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual up

22、dating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders fo

23、r international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and

24、its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments an

25、d receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the i

26、nternationalstandardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.

27、This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.