ASTM D6240 D6240M-2012 red 2390 Standard Tables of Body Measurements for Mature Men ages 35 and older Sizes Thirty-Four to Fifty-Two (34 to 52) Short Regular and Tall《对用于年龄为35岁及以上 .pdf
《ASTM D6240 D6240M-2012 red 2390 Standard Tables of Body Measurements for Mature Men ages 35 and older Sizes Thirty-Four to Fifty-Two (34 to 52) Short Regular and Tall《对用于年龄为35岁及以上 .pdf》由会员分享,可在线阅读,更多相关《ASTM D6240 D6240M-2012 red 2390 Standard Tables of Body Measurements for Mature Men ages 35 and older Sizes Thirty-Four to Fifty-Two (34 to 52) Short Regular and Tall《对用于年龄为35岁及以上 .pdf(20页珍藏版)》请在麦多课文档分享上搜索。
1、Designation:D624098 (Reapproved 2006) Designation: D6240/D6240M 12Standard Tables ofBody Measurements for Men Sizes Thirty-Four to Sixty (34to 60) RegularBody Measurements for Mature Men, ages 35and older, Sizes Thirty-Four to Fifty-Two (34 to 52) Short,Regular, and Tall1This standard is issued unde
2、r the fixed designation D6240; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since th
3、e last revision or reapproval.This standard is issued under the fixed designation D6240/D6240M; the number immediately following the designation indicates theyear of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of lastreapproval
4、. A superscript epsilon () indicates an editorial change since the last revision or reapproval.INTRODUCTIONThese body measurement tables were developed from evaluation of data currently used in theapparel industry. These tables were developed from data published by the U.S. Department ofCommerce,2Ca
5、esar Study,3Size USA Study,4Current USA industry and Studies, Scans anddocumentation from Alvanon Inc.5This standard takes into consideration Mature Men at a standardheight of Short 5 ft 7 in., Regular 5 ft 10 in., and Tall 6 ft 2 in. (65 % of average USA population)taking into account the decrease
6、and increase in body weight that shift a person from one size toanother, while this person does not gain in height. Major review and evaluation was done. Theincremental growth at different key body points has been addressed and defined, which resulted inidentifying increases and decreases at differe
7、nt rates in specific areas; chest, waist, high hip andhip/seat. Additionally to better serve the industry, incremental movement between sizes was reviewedensuring smooth transition between sizes. To verify the proposed body measurements, a three-dimensional Avatar was created in the Mens Short, Regu
8、lar and Tall size range 34 through 52 byAlvanon Inc. for a visual reference and is also attached in the documentation.1. Scope1.1These standard tables cover the body measurements of men from size thirty-four to sixty. Although these are bodymeasurements, they can be used in designing apparel for men
9、 in this size range when such factors as fabric type, ease of bodymovement, styling, and fit are taken into account.1.2The values stated in either acceptable metric units or in other units shall be regarded separately as standard. The values statedin each system may not be exact equivalents; therefo
10、re, each system must be used independently of the other, without combiningvalues in any way.1.1 These tables list body measurements of mature male figure type, age 35 and older, sizes 34 through 52 in Short, Regular,and Tall. Although these are body measurements, they can be used as a baseline in de
11、signing apparel for Mature Men in this sizerange when considering such factors as fabric type, ease for body movement, styling, and fit.1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in eachsystem may not be exact equivalents
12、; therefore, each system shall be used independently of the other. Combining values from the1These tables are under the jurisdiction of ASTM Committee D13 on Textiles and is the direct responsibility of Subcommittee D13.55 on Body Measurement for ApparelSizing.Current edition approved Jan.Feb. 1, 20
13、06.2012. Published February 2006.March 2012. Originally approved in 1998. Last previous edition approved in 19982006 asD624098(2006). DOI: 10.1520/D6240-98R06.10.1520/D6240_D6240M-12.2For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at serviceastm
14、.org. For Annual Book of ASTM Standardsvolume information, refer to the standards Document Summary page on the ASTM website.2U.S. Department of Commerce, Voluntary Product Standard: Body Measurements for the Sizing of Childrens Apparel, NIST Publication No. PS 54-172, Washington,DC.3Available from A
15、merican National Standards Institute, 11 W. 42nd St., 13th Floor, New York, NY 10036.3Caesar: Summary Statistics for the Adult population (Ages 18-65) of the United States of America, June 2002.4Available from: http:/ Inc., 145 W. 30th Street, Suite 1000, New York, NY 10001.1This document is not an
16、ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Becauseit may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In
17、 all cases only the current versionof the standard as published by ASTM is to be considered the official document.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.two systems may result in non-conformance with the standard.1.3 This sta
18、ndard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibilityof the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatorylimitations prior to use.2. Referenced Documents2.1 AS
19、TM Standards:6D123 Terminology Relating to TextilesD5219 Terminology Relating to Body Dimensions for Apparel Sizing2.2 ISO Standard:7ISO 3635 Size Designation of Clothes, Definitions, and Body Measurement Procedures Apparel Sizes3. Terminology3.1 Definitions:3.1.1 For definitions relating to body di
20、mensions, refer to Terminology D5219.3.1.2 For definitions of other textile terms used in these tables, refer to Terminology D123.4. Significance and Use4.1 The use of the body measurement information in Tables 1-4 will assist manufacturers in the development of patterns andgarments that are consist
21、ent with the current anthropometric characteristics of the population of interest. These standard tables inturn should reduce or minimize consumer confusion and dissatisfaction related to apparel sizing. (Also refer to ISO 3635.) Tables1 and 2 will assist manufacturers in developing patterns and gar
22、ments that are consistent with the current anthropometriccharacteristics of the population of interest. This practice should in turn reduce or minimize consumer confusion and dissatisfactionrelated to apparel sizing. (Also refer to ISO 3635 Size Designation Procedures.)4.2 Three-dimensional avatars
23、depicting each of the mature mens sizes in short, regular and tall, were created by Alvanon, Inc.and included in this standard to assist manufacturers in visualizing the posture, shape, and proportions generated by themeasurements charts in the accompanying Tables. (Avatar 1-6) See Figs. 1-3.5. Appa
24、ratus5.1 Tape Measure, (dimensionally stable and approximately 1.5 cm (1/2 in.)12 in. wide and graduated accurately in cm (1/16in.). 116 in.).5.2 Plastic Goniometer, to measure the radian (degree) of shoulder slope.5.3 Scale, standard, calibrated, body weight type.5.4 Metal Ruler.6. Procedure6.1 Gen
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
5000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASTMD6240D6240M2012RED2390STANDARDTABLESOFBODYMEASUREMENTSFORMATUREMENAGES35ANDOLDERSIZESTHIRTYFOURTOFIFTYTWO34TO52SHORTREGULARANDTALL

链接地址:http://www.mydoc123.com/p-521937.html