ABS 62 CORR-2016 GUIDE FOR BUILDING AND CLASSING YACHTS DECEMBER 2016.pdf

《ABS 62 CORR-2016 GUIDE FOR BUILDING AND CLASSING YACHTS DECEMBER 2016.pdf》由会员分享，可在线阅读，更多相关《ABS 62 CORR-2016 GUIDE FOR BUILDING AND CLASSING YACHTS DECEMBER 2016.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、 GUIDE FOR BUILDING AND CLASSING YACHTS DECEMBER 2016 CORRIGENDA/EDITORIALS 22 February 2016 CORRIGENDA/EDITORIALS 1 July 2016 CORRIGENDA/EDITORIALS 1 October 2016 Page No. Paragraph Comments Part 3 Hull Construction and Equipment Chapter 2 Hull Structures and Arrangements Section 1 Primary Hull Str

2、ength 39 3-2-1/1.1.1 In definition of Cb, “L 61 m (200 ft)”. 41 3-2-1/1.1.2(d) In definition of ncg, “ncg” to read “(1 + ncg)”. Part 3 Hull Construction and Equipment Chapter 2 Hull Structures and Arrangements Section 3 Displacement Yachts 69 3-2-3/3.3.6 Reference “3-2-3/1.3” to read “3-2-3/3.3”. Pa

3、rt 3 Hull Construction and Equipment Chapter 2 Hull Structures and Arrangements Section 4 Semi-Planing and Planing Yachts 85 3-2-4/1 In first line, “less than” to read “greater than”. 89 3-2-4/3.5.2(a) In definition of , reference “3-1-2/Figure 4” to read “3-1-2/Figure 5”. Part 3 Hull Construction a

4、nd Equipment Chapter 2 Hull Structures and Arrangements Section 5 Sailing Yachts 109 3-2-5/5.1.1 References “3-2-5/5.1.3(b) and 3-2-5/5.1.4(b)” to read “3-2-5/5.1.2(b) and 3-2-5/5.1.3(b)”. 109 3-2-5/5.1.3 Renumber as “5.1.2”. 109 3-2-5/5.1.3(a) Renumber as “5.1.2(a)”. 109 3-2-5/5.1.3(a) In definitio

5、n of F, reference “3-1-1/5.7” to read “3-1-1/7.3”. 110 3-2-5/5.1.3(b) Renumber as “5.1.2(b)”. 110 3-2-5/5.1.3(b) In last line, reference “3-2-5/5.1.3(a)” to read “3-2-5/5.1.2(a)”. 110 3-2-5/5.1.4 Renumber as “5.1.3”. 110 3-2-5/5.1.4(a) Renumber as “5.1.3(a)”. 111 3-2-5/5.1.4(a) In last line, referen

6、ce “3-2-5/5.1.3(a)” to read “3-2-5/5.1.2(a)”. 111 3-2-5/5.1.4(b) Renumber as “5.1.3(b)”. 112 3-2-5/5.1.4(b) In last line before Table 3, reference “3-2-5/5.1.3(a)” to read “3-2-5/5.1.2(a)”. 113 3-2-5/5.1.4(c) Renumber as “5.1.3(c)”. 114 3-2-5/5.1.4(c) In second-to-last paragraph before Table 6, refe

7、rence “3-2-5/5.1.3(a)” to read “3-2-5/5.1.2(a)”. ABSGUIDE FOR BUILDING AND CLASSING YACHTS .2016 1 Corrigenda/Editorials 1 October 2016 Page No. Paragraph Comments Part 3 Hull Construction and Equipment Chapter 2 Hull Structures and Arrangements Section 5 Sailing Yachts 115 3-2-5/5.1.4(d) Renumber a

8、s “5.1.3(d)”. 115 3-2-5/5.1.4(e) Renumber as “5.1.3(e)”. 116 3-2-5/5.3.2 In first paragraph, reference “2-6-1/7.1” to read “2-6-1/7.1 of the ABS Rules for Materials and Welding (Part 2) Aluminum and Fiber Reinforced Plastics”. Part 3 Hull Construction and Equipment Chapter 2 Hull Structures and Arra

9、ngements Section 6 Hull Structural Arrangement 127 3-2-6/Figure 1 In definition of x, “Lr” to read “Lf”. 128 3-2-6/1.3.6 In last paragraph, reference “3-2-10/23.7” to read “3-2-10/15.7”. Part 3 Hull Construction and Equipment Chapter 2 Hull Structures and Arrangements Section 7 Hull Structural Arran

10、gement 138 3-2-7/1.3.5(b) Reference “3-2-3/5.7.4” to read “3-2-4/5.1.4(a)”. 138 3-2-7/1.3.5(b) Reference “3-2-6/Figure 2” to read “3-2-7/Figure 2”. 143 3-2-7/3.1.1 Reference “Chapters 4 and 5 of the ABS Rules for Materials and Welding (Part 2) Aluminum and Fiber Reinforced Plastics (FRP)” to read “C

11、hapter 4 of the ABS Rules for Materials and Welding (Part 2) and Chapter 5 of the ABS Rules for Materials and Welding (Part 2) Aluminum and Fiber Reinforced Plastics (FRP)”. Part 3 Hull Construction and Equipment Chapter 2 Hull Structures and Arrangements Section 8 Keels, Stems, and Shaft Struts 156

12、 3-2-8/5.1 In definition of L, reference “Section 3-1-1/3” to read “3-1-1/3”. 157 3-2-8/9.3 In definition of D, reference “Section 4-3-2” to read “Section 4-3-1”. Part 3 Hull Construction and Equipment Chapter 2 Hull Structures and Arrangements Section 9 Rudders 164 3-2-9/7.1 In definition of QR, “L

13、tf-m” to read “Ltf-ft”. 177 3-2-9/23.1.3 In equation for P, “V2” to read “V”. (2 places) 180 3-2-9/23.5.1 In definition of R, “pphM” to read “bphM”. 181 3-2-9/23.7.1 In definition of d, reference “22.1.1” to read “3-2-9/23.1.1”. Part 3 Hull Construction and Equipment Chapter 2 Hull Structures and Ar

14、rangements Section 12 Bulwarks, Rails, Ports, Portlights, Windows, Ventilators, Tank Vents and Overflows 194 3-2-12/1.7 In equation, “Q0” to read “Q”. 194 3-2-12/1.7 Delete definition “Q0= material factor, as determined from 3-2-12/1.7.1”. 198 3-2-12/5.3.1 In second paragraph, “1/4“ radius” to read

15、“6.5 mm (0.25 in.) radius”. 202 3-2-12/7.1 Delete “In addition, for those located on the fore deck of yachts with length L (as defined in 3-1-1/3) not less than 80 meters (263 feet), the requirements given in 3-2-12/7.7 are to be complied with.”. 202 3-2-12/7.5 Delete “and, where applicable, the req

16、uirements given below in 3-2-12/7.7”. 2 ABSGUIDE FOR BUILDING AND CLASSING YACHTS .2016 Corrigenda/Editorials 1 October 2016 Page No. Paragraph Comments Part 3 Hull Construction and Equipment Chapter 3 Subdivision and Stability Appendix 2 Onboard Computers for Stability Calculations 244 3-3-A2/11.1

17、Reference “3-3-A3/15” to read “3-3-A2/15”. Part 3 Hull Construction and Equipment Chapter 5 Equipment Section 1 Anchoring and Mooring Equipment 250 3-5-1/3 In definition of m, add “2.0” value for SI units. 251 3-5-1/3 Delete definition “b = breadth of the widest superstructure or deckhouse on each t

18、ier, in m (ft)”. 258 3-5-1/Table 1 SI, MKS Units Second instance of “UY25” through “UY30” to read “UY32” through “UY37”. 259 3-5-1/Table 1 US Units Second instance of “UY25” through “UY30” to read “UY32” through “UY37”. Part 4 Vessel Systems and Machinery Chapter 1 General Section 1 Classification o

19、f Machinery 4 4-1-1/7.1 Reference “4-1-1/25” to read “4-1-1/19”. 13 4-1-1/Table 2 In Note 2, reference “4-7-9/Table 9” to read “4-7-2/Table 1”. (2 places) 13 4-1-1/Table 3F In Row 19, reference “4-4-3/13.5” to read “4-4-3/11.5”. Part 4 Vessel Systems and Machinery Chapter 3 Propulsion, Maneuvering,

20、and Deck Machinery Section 3 Steering Gear 66 4-3-3/13 Reference “4-6-2/5.3.5” to read “4-6-2/5.3”. Part 4 Vessel Systems and Machinery Chapter 3 Propulsion, Maneuvering, and Deck Machinery Section 5 Anchor Windlass 72 4-3-5/5.5.1 Reference “4-8-3/1.11 Steel Vessel Rules” to read “4-8-3/1.11 of the

21、Steel Vessel Rules”. 72 4-3-5/5.5.1 Reference “Section 4-3-1” to read “Section 4-3-1 of the Steel Vessel Rules”. Part 4 Vessel Systems and Machinery Chapter 4 Pumps and Piping Systems Section 2 Pumps, Pipes, Valves and Fittings 95 4-4-2/Table 1 In Note 2, “ASTM B31.1” to read “ASME B31.1” 106 4-4-2/

22、Table 2 Reference “paragraph 3(f) of Regulation 13F” to read “Regulation 19.3.6”. Part 4 Vessel Systems and Machinery Chapter 4 Pumps and Piping Systems Section 3 Bilge and Ballast Systems and Tanks 120 4-4-3/5.13 Reference “Sections 4 and 5 of the ABS Guide for Ballast Water Treatment” to read “Sec

23、tion 4 of the ABS Guide for Ballast Water Treatment”. 120 4-4-3/7.3.1 In last paragraph, delete “For vent pipes located on the fore deck, as defined in 3-2-12/9.7.1, the strength and wall thickness requirements are to also comply with 3-2-12/9.7.2 and 3-2-12/9.7.3:”. ABSGUIDE FOR BUILDING AND CLASSI

24、NG YACHTS .2016 3 Corrigenda/Editorials 1 October 2016 Page No. Paragraph Comments Part 4 Vessel Systems and Machinery Chapter 4 Pumps and Piping Systems Section 4 Fuel Oil and Lubricating Oil Systems and Tanks 128 4-4-4/1.1.1(a)ii) Delete “The arrangements in 4-4-4/Figure 1 are acceptable for struc

25、tural tanks provided the requirements of 4-4-4/11 are complied with.”. Part 4 Vessel Systems and Machinery Chapter 4 Pumps and Piping Systems Section 6 Hydraulic, Pneumatic, and Gasoline Systems 137 4-4-6/7.5i) Reference “4-6-3/11.7” to read “4-6-3/9.7”. Part 4 Vessel Systems and Machinery Chapter 5

26、 Fire Extinguishing Systems Section 2 Requirements for Yachts 500 Gross Tons and Over 156 4-5-2/13 Reference “4-5-2/37” to read “4-5-2/23”. Part 4 Vessel Systems and Machinery Chapter 6 Electrical Installations Section 1 General 173 4-6-1/19 Reference “4-6-5/1.1.4” to read “4-6-5/1.1.3”. 177 4-6-1/T

27、able 5 In Item (u), reference “Sections 3-2-7, 3-2-12 and 3-2-13” to read “Sections 3-2-6, 3-2-10 and 3-2-11”. Part 4 Vessel Systems and Machinery Chapter 6 Electrical Installations Section 2 Shipboard Systems 179 4-6-2/3.1.2 In second paragraph, reference “4-1-1/13.21” to read “4-1-1/13.17”. 180 4-

28、6-2/3.1.3 In first paragraph, reference “4-1-1/13.21” to read “4-1-1/13.17”. 185 4-6-1/Table 1 In “Navigation” row, delete “ACC”. 185 4-6-1/Table 1 Delete “Other emergency services” rows. Part 4 Vessel Systems and Machinery Chapter 6 Electrical Installations Section 4 Machinery and Equipment 228 4-6

29、-4/1.7 In first bullet, reference “4-6-1/3.3” to read “4-6-1/3.7”. 246 4-6-4/10.1 In first and second paragraphs, delete “or for services indicated in 4-6-4/Table 11”. (2 places) 248 4-6-4/10.5.8 In first paragraph, reference “4-1-1/39” to read “4-1-1/37”. Part 4 Vessel Systems and Machinery Chapter 6 Electrical Installations Section 4 Machinery and Equipment 250 4-6-4/10.5.12 In last paragraph, reference “4-7-2/Table 6B” to read “4-7-4/Table 6B”. 261 4-6-4/Table 6 In Note 2, reference “4-6-5/1.1.4” to read “4-6-5/1.1.3”. 4 ABSGUIDE FOR BUILDING AND CLASSING YACHTS .2016