ASTM E2462-2018 Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV Type I.pdf

《ASTM E2462-2018 Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV Type I.pdf》由会员分享，可在线阅读，更多相关《ASTM E2462-2018 Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV Type I.pdf（11页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: E2462 10E2462 18Standard Performance Specification forCargo Bed Cover (CBC) HMMWV, Type I1This standard is issued under the fixed designation E2462; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revi

2、sion. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 ScopeThis specification covers the performance requirements for the Type I Cargo Bed Cover (CBC). The Type I CargoBed Cover is

3、a removable general purpose rigid enclosure for the cargo bed of the M1152A1, M1152A1 with B2 Armor Kit,M1037, M1042, M1097, and M1113 High-Mobility Multipurpose Wheeled Vehicle (HMMWV). The Type I CBC providesenvironmental protection and security for mission equipment and items of general transport

4、.1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversionsto inch-pound units that are provided for information only and are not considered standard.1.3 The following safety hazards caveat pertains only to the test required portion

5、, Section 45, of this specification. This standarddoes not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of thisstandard to establish appropriate safety safety, health, and healthenvironmental practices and determine the applicab

6、ility ofregulatory limitations prior to use.1.4 This international standard was developed in accordance with internationally recognized principles on standardizationestablished in the Decision on Principles for the Development of International Standards, Guides and Recommendations issuedby the World

7、 Trade Organization Technical Barriers to Trade (TBT) Committee.2. Referenced Documents2.1 ASTM Standards:2E631 Terminology of Building ConstructionsE1749 Terminology Relating to Rigid Wall Relocatable SheltersE1925 Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structu

8、res2.2 Army Standards:3ARMY TM 9-2320-280-10 HMMWVS Operators ManualARMY TM 10-5411-231-13 cover; HMMWV; shelterASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advis

9、ed that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either r

10、eapproved or withdrawn.Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If y

11、ou feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individua

12、l reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the Copyright Clearance Center, 222Rosewood Drive, Danvers, MA 01923, Tel: (978) 646-2600; http:/ 1811