REG UFGS-10 44 16-2012 FIRE EXTINGUISHERS.pdf

《REG UFGS-10 44 16-2012 FIRE EXTINGUISHERS.pdf》由会员分享，可在线阅读，更多相关《REG UFGS-10 44 16-2012 FIRE EXTINGUISHERS.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、*USACE / NAVFAC / AFCESA / NASA UFGS-10 44 16 (May 2012)-Preparing Activity: NASA SupersedingUFGS-10 44 16 (May 2009)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2012*SECTION TABLE OF CONTENTSDIVISION 10 - SPECIALTIESSECTION 10 44 16FIRE EXTINGUISHERS05/12

2、PART 1 GENERAL1.1 REFERENCES1.2 SUBMITTALS1.3 DELIVERABLES1.3.1 Samples1.4 DELIVERY, HANDLING, AND STORAGE1.5 WARRANTYPART 2 PRODUCTS2.1 TYPES2.2 MATERIAL2.3 SIZE2.4 ACCESSORIES2.5 CABINETS2.5.1 Material2.5.2 Type2.5.3 Size2.6 WALL BRACKETSPART 3 EXECUTION3.1 INSTALLATION3.2 ACCEPTANCE PROVISIONS3.2

3、.1 Repairing3.2.2 Cleaning- End of Section Table of Contents -SECTION 10 44 16 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-10 44 16 (May 2012)-Preparing Activity: NASA SupersedingUFGS-10 44 16 (May 2009)

4、UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2012*SECTION 10 44 16FIRE EXTINGUISHERS05/12*NOTE: This guide specification covers the requirements for portable fire extinguishers, including wall brackets, accessories, maintenance servicing and inspection tag

5、ging requirements.Associated work found in other sections includes non-portable fire protection systems, alarms and related accessories.Consult with the local AHJ (Authority Having Jurisdiction) during design stage. Indicate on drawings the locations for proper placement and each type of portable ex

6、tinguisher located within the installation.Adhere to UFC 1-300-02 Unified Facilities Guide Specifications (UFGS) Format Standard when editing this guide specification or preparing new project specification sections. Edit this guide specification for project specific requirements by adding, deleting,

7、 or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments, suggestions and recommended changes for this guide specification are welcome and

8、should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in SECTION 10 44 16 Page 2Provided by IHSNot for ResaleNo reproduction or networki

9、ng permitted without license from IHS-,-,-the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference

10、in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publicatio

11、ns listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.INTERNATIONAL CODE COUNCIL (ICC)ICC IFC (2009) International Fire CodeNATIONAL FIRE PROTECTION ASSOCIATION (NFPA)NFPA 1 (2012) Fire CodeNFPA 10 (

12、2010) Standard for Portable Fire ExtinguishersNFPA 101 (2012; Amendment 1 2012) Life Safety CodeNFPA 303 (2011) Fire Protection Standards for Marinas and BoatyardsNFPA 385 (2012) Standard for Tank Vehicles for Flammable and Combustible LiquidsNFPA 409 (2011; Errata 11-1) Standard on Aircraft Hangars

13、NFPA 418 (2011) Standard for HeliportsNFPA 505 (2011) Fire Safety Standard for Powered Industrial Trucks Including Type Designations, Areas of Use, Conversions, Maintenance, and OperationsNFPA 99 (2012) Health Care Facilities CodeU.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)29 CFR 1910.10

14、6 Flammable and Combustible Liquids29 CFR 1910.157 (2003) Portable Fire ExtinguishersSECTION 10 44 16 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-UNDERWRITERS LABORATORIES (UL)UL 154 (2005; Reprint Nov 2010) Carbon-Dioxide Fire Extinguisher

15、sUL 2129 (2005; Reprint Jul 2011) Halocarbon Clean Agent Fire ExtinguishersUL 299 (2002; Reprint Apr 2009) Dry Chemical Fire ExtinguishersUL 626 (2005; Reprint Nov 2010) 2-1/2 Gallon Stored-Pressure, Water-Type Fire ExtinguishersUL 8 (2005; Reprint Jun 2011) Water Based Agent Fire Extinguishers1.2 S

16、UBMITTALS*NOTE: Review Submittal Description (SD) definitions in Section 01 33 00 SUBMITTAL PROCEDURES and edit the following list to reflect only the submittals required for the project.The Guide Specification technical editors have designated those items that require Government approval, due to th

17、eir complexity or criticality, with a “G.“ Generally, other submittal items can be reviewed by the Contractors Quality Control System. Only add a “G” to an item, if the submittal is sufficiently important or complex in context of the project.For submittals requiring Government approval on Army proje

18、cts, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the Resident Management System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other

19、organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy, Air Force, and NASA projects.Choose the first bracketed item for Navy, Air Force and NASA projects, or choose the second bracket

20、ed item for Army projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contractor Quality Control approval.for information only. When used, a designation following the “G“ designation identifies the office that will review th

21、e submittal for the Government. Submit the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SECTION 10 44 16 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SD-01 Preconstruction SubmittalsManufacturers DataSD-02 Shop Drawings

22、Fire ExtinguishersAccessoriesCabinetsWall BracketsSD-03 Product DataFire ExtinguishersAccessoriesCabinetsWall BracketsReplacement PartsSD-04 SamplesFire ExtinguisherCabinetWall BracketsAccessoriesSD-07 CertificatesFire ExtinguishersManufacturers Warranty with Inspection Tag1.3 DELIVERABLES1.3.1 Samp

23、lesProvide the following samples: One of each type of Fire Extinguisher being installed; one full-sized sample of each type of Cabinet being installed; three samples of Wall Brackets and Accessories of each type being used.Approved samples may be used for installation, with proper identification and

24、 storage.1.4 DELIVERY, HANDLING, AND STORAGEProtect materials from weather, soil, and damage during delivery, storage, and construction.SECTION 10 44 16 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Deliver materials in their original package

25、s, containers, or bundles bearing the brand name and the name and type of the material. Provide portable fire extinguishers in compliance with NFPA 505 for all ancillary vehicles where Fire Safety Standard for Powered Industrial Trucks, including type designations, special c conditions relating to a

26、reas of use, conversions, maintenance, or specific operations apply.1.5 WARRANTYGuarantee that Fire Extinguishers are free of defects in materials, fabrication, finish, and installation and that they will remain so for a period of not less than _ years after completion.PART 2 PRODUCTSSubmit fabricat

27、ion drawings consisting of fabrication and assembly details performed in the factory and product data for the following items: Fire Extinguishers; Accessories, Cabinets, Wall Brackets.2.1 TYPES*NOTE: Select one or more of the following types of pressurized fire extinguishers, as required:Water and F

28、oam - Water extinguishers are for Class A fires only (paper, wood, cloth).Foam extinguishers are for Class A and B fires only (common combustibles, flammable liquids and gases).Carbon Dioxide - Carbon Dioxide extinguishers can be used on Class B and C fires (flammable liquids and gases, live electri

29、cal equipment).Dry Chemical - Dry Chemical extinguishers can be used on Class A, B, and C fires (all the above elements) (not recommended for computers or sensitive electrical equipment - use clean agent or Carbon Dioxide).Wet Chemical - Wet chemical extinguishers are primarily for cooking media fir

30、es (high temperature oils and fats) (some may also be used on Class A fires in commercial kitchens).Clean Agent - Newer Clean Agent extinguishers have replaced former halogenated extinguishers with less ozone depleting halocarbon agents, for Class B and C fires, with some larger units available for

31、use on Class A, B, and C fires.Dry Powder - Dry Powder extinguishers are for Class D or combustible metal fires only.Water Mist - Water Mist extinguishers are primarily for Class A fires, although they are also safe for use in Class C fires.SECTION 10 44 16 Page 6Provided by IHSNot for ResaleNo repr

32、oduction or networking permitted without license from IHS-,-,-*Submit certificates that show Fire Extinguishers comply with local codes and regulations.Provide Fire Extinguishers conforming to NFPA 10. Provide quantity and placement in compliance with the applicable sections of ICC IFC, Section 1414

33、 and ICC IFC, Section 906, NFPA 1, NFPA 101, NFPA 99, NFPA 303, NFPA 385, NFPA 409, NFPA 418,29 CFR 1910.106 and 29 CFR 1910.157. Provide stored-pressure cartridge hand-pump water type fire extinguishers.Provide foam type fire extinguishers.Provide carbon-dioxide type fire extinguishers compliant wi

34、th UL 154.Provide dry chemical type fire extinguishers compliant with UL 299.Provide wet chemical type fire extinguishers compliant with UL 8.Provide clean agent type fire extinguishers compliant with UL 2129.Provide dry powder type fire extinguishers.Provide water mist type fire extinguishers compl

35、iant with UL 626. Submit Manufacturers Data for each type of Fire Extinguisher required, detailing all related Cabinet, Wall Mounting and Accessories information, complete with Manufacturers Warranty with Inspection Tag.2.2 MATERIAL*NOTE: Select one or more of the following for the shell material. C

36、heck manufacturers to ensure that the material and extinguisher type are compatible.*Provide corrosion-resistant steel aluminum enameled steel _ extinguisher shell.2.3 SIZE*NOTE: Select one or more of the following for the size of the extinguisher. Size as indicated.* 9.5 liter 2-1/2 gallons extingu

37、ishers.1.1 kilogram 2-1/2 pounds extinguishers.2.3 4.5 6.8 9 13.6 kilogram 5 10 15 20 30 pounds extinguishers.2.4 ACCESSORIES*SECTION 10 44 16 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTE: Select items as applicable. Indicate appropriat

38、e UL rating.* Forged brass valve Fusible plug Safety release Antifreeze Pressure gage2.5 CABINETS*NOTE: Include the following paragraphs if fire extinguishers are designated as cabinet mounted. If fire extinguishers are to be hung on wall brackets only, then delete cabinet requirements.*2.5.1 Materi

39、al*NOTE: Select one of the following materials for cabinets.*Provide enameled steel corrosion-resistant steel aluminum cabinets.2.5.2 Type*NOTE: Select one of the following types.* Provide recessed trimless surface type cabinets. Provide semi-recessed cabinet for a 150 100 millimeter 6-inch 4-inch w

40、all.Provide recessed trimless surface bubble type cabinets.2.5.3 SizeDimension cabinets to accommodate the specified fire extinguishers.2.6 WALL BRACKETS*NOTE: Delete the paragraph heading and the following paragraphs if cabinets are specified. Select one of the following.*Provide running-board spri

41、ng-clip wall-hook fire extinguisher wall brackets.SECTION 10 44 16 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Provide wall bracket and accessories as approved.PART 3 EXECUTION3.1 INSTALLATION*NOTE: For Class A light-hazard occupancies, such as office buildings, use a Class A extinguisher within a25 meter 75-foot travel distance with one unit of 1A rating for every 280 square meter 3,000 square feet of floor area; ordinary hazard occupancies such as warehouses