NAVY MIL-STD-1323-96-1979 UNIT LOAD FOR UNDERWAY REPLENISHMENT CHARGE SPOTTING CXU-4 B IN SMALL ARMS AMMUNITION BOX MK 1 MOD 0《MK 1 MOD 0轻武器弹药箱CXU-4 B测点定位航行中充电补给负载》.pdf

《NAVY MIL-STD-1323-96-1979 UNIT LOAD FOR UNDERWAY REPLENISHMENT CHARGE SPOTTING CXU-4 B IN SMALL ARMS AMMUNITION BOX MK 1 MOD 0《MK 1 MOD 0轻武器弹药箱CXU-4 B测点定位航行中充电补给负载》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-STD-1323-96-1979 UNIT LOAD FOR UNDERWAY REPLENISHMENT CHARGE SPOTTING CXU-4 B IN SMALL ARMS AMMUNITION BOX MK 1 MOD 0《MK 1 MOD 0轻武器弹药箱CXU-4 B测点定位航行中充电补给负载》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-STD-1323-96 (NAVY) M I LITA RY STA ND A RD UNIT LOAD 24 MAY 1979 FOR UNDERWAY REPLENISHMENT IN SMALL ARMS AMMUNITION BOX, MK 1 MOD O CHARGE, SPOTTING, CXUJ/B 5 UNIT LOADS HIGH IN STORAGE HAZARD CLASSIFICATION DOT-CLASS-CORROSIVE MATERIAL CG-CLASS II - F PALLET UNIT LOAD DATA MOD O MOD 1 NUMBER O

2、F CHARGES PER CONTAINER 84 84 NUMBER OF CONTAINERS PER UNIT LOAD. 20 20 NUMBER OF CHARGES PER UNIT LOAD . 1680 GROSS WEIGHT OF ONE CONTAINER (APPROX). 67 LBS. WEIGHT OF STEEL STRAPPING (APPROX) . 8 LBS. 110 LES. DODIC/NALC . A fi9 112 . 4 IS OVERALL HEIGHT . WEIGHT OF PALLET (APPROX) GROSS WEIGHT OF

3、 UNIT LOAD (APPROX) 1458 LBS.A 1420 LBS.A CUBE 35.5CU. FT. 35.1 CU. Fi. . DIMENSION A (UNIT LOAD HEIGHT) 34 7/8 A DO NOT USE FOR SHIPPING PURPOSES DO NOT STACK MORE THAN SHIPPING (PACKING) CONDITION 30003-AR-9/67 NOTES: 1. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES. 2. FOR CROSS REFERENCE T

4、O ASSOCIATED TRUCKLOADING, CObiTAINERLOADING AND CARLOADING MILITARY STANDARDS, REFER TO INDEX TO STANDARDS, MIL-HDBK-236 NAVY). THIS UNIT LOAD IS AUTHORIZED AND RELEASED FOR SHIPPING, HANDLING, STORAGE AND TRANSFER-AT-SEA. IT M4Y ALSO BE USED FOR OF THIS UNIT LOAD SHALL CONSIST OF THIS DOCUMENT AND

5、 THE LATEST Licensed by Information Handling Services.- MIL-STD-1323-96 (NAVY) PALLETIZING PROCEDURE (a) ) (c) THREAD STRAPPING, ITEM 2, BETWEEN DECK WIRES OF PALLET, ITEM 1, AS SHOWN IN DETAIL A, POSITION THE CONTAINERS ON THE PALLET WITH EQUAL OVERHANG ON BOTH SIDES AND ENDS. POSITION STRAPPING, I

6、TEM 3, UNDER THE PALLET DECK AND AROUND CONTAINERS, TENSION AND DOUBLE NOTCH SEAL, ITEM4. POSITION STRAPPING, ITEM 2, OVER EDGE PROTECTORS, ITEM 5, AND AROUND UNIT LOAD TENSION AND DOUBLE NOTCH SEAL. (d) MARKING: THE UNIT LOAD SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-1323 (NAVY). NOTES: I. 2. .O31

7、 COLD ROLLED, HEAT TREATED, MAY BE SUBSTITUTED. DO NOT USE PIPE I STRAPPING WITH POWER TOOLS. DEPALLETIZING PROCEDURE (a) CUT AND REMOVE STRAPPING. ) REMOVE EDGE PROTECTORS. (c) REMOVE CONTAINERS. REVIEW ACTIVITY: NAW-OS PREPARING ACTIVITY: NAW-OS (PROJECT NO. 8140-N378) PAGE 2 Licensed by Information Handling Services