NAVY MIL-E-917 E-1993 ELECTRIC POWER EQUIPMENT BASIC REQUIREMENTS《电功率设备基本要求》.pdf

《NAVY MIL-E-917 E-1993 ELECTRIC POWER EQUIPMENT BASIC REQUIREMENTS《电功率设备基本要求》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-E-917 E-1993 ELECTRIC POWER EQUIPMENT BASIC REQUIREMENTS《电功率设备基本要求》.pdf（127页珍藏版）》请在麦多课文档分享上搜索。

1、mmzzEzlMIL-E-917E(NAVY)6 Auzust 1993SUPERSEDINGMIL-E-917D(NAVY)28January 1965(See 6.10)MILITARY SPECIFICATIONELECTRIC POWER EQUIPMENTBASIC REQUIREMENTSThis specification is approved for use by the Department of the Navy andis available for use by all Departments and Agencies of the Departmentof Defe

2、nse.1. SCOPE1.1 Scone. Thisthe design, materials,specification covers the basic requirements applicable toand construction of Naval shipboard electric power equip-ment (exclusive of communication equipment fire control equipment, and electronicequipment, other than that used in electric power applic

3、ations). Only oneclassification of equipment is covered by this specification.2. APPLICABLE DOCUMENTS2.1 ,Government documents.2.1.1 Specifications. stanrds. Andfiandbooks. The followingSpecifi-“cations, standards, and handbooks forma part of this document to the extentspecified herein. Unless other

4、wise specified, the isses of these documents are“ihoselisted in the issue of the Department of Defense .Index of Specifications andStander Instrument, Power and Telephone (Nonindi-cating), Style F61.Fuses; Instrument, Power and Telephone (Nonindi-cating), Style F62.Fuses; Instrument, Power and.Telep

5、hone (Nonindi,-cating), .StyleF63.Fuses; Instrument, Power and Telephone (Nonindi.-cating), Style F64.Fuses; Instrument, Power and Telephone (Nonindi-cating), Style F65.Fuses; Instrument, ,Power and Telephone (Nonindi-cating), Style F66.Insulation, Electrical, Plastic (Submarine Bus BarCovering).Swi

6、tches, Rotary, Snap Action and Detent/SpringReturn Action General Specification for.Coils, Fixed and Variable, Radiofrequency, GeneralSpecification for.Coolers, Fluid, Naval Shipboard: Lubricating Oil,Hydraulic Oil, and Fresh Water.Switches, Rotary, Enclosed.Switchesand Detectors, Shipboard Alarm Sy

7、stems.Meters, Electrical-Indicating (Switchboard andPortable Types).Switchgear, Power, Naval Shipboard.Meters, Electrical, Frequency.Corrosion Preventive Compound, Solvent Cutback,Cold-Application.Transformers, Power, Step-Down (Miscellaneous,Naval Shipboard Use).Terminals, Electrical Lug and Conduc

8、tor Splices,Crimp Style. Brakes, Magnet, Naval Shipboard,.,Wire; Electrical, Insulated”i.General Specificationfor.Wire, Electrical, Polytetrafluoroethylene (PTFE)Insulated, 200”C, 600 Volts, Extruded Insulation.Wire, Electrical, Polytetrafluoroethylene (PTFE)Insulated, 200C, 1000 Volts, Extruded Ins

9、ula-tion.Wire, Electrical, Silicone Rubber Insulated,200eC, 600 Volts.Wire, Electrical, Silicone Rubber Insulated,200”C, 1000 volts.Wire, Electrical, Fluorinated Ethylene Propylene(FEP) Insulated, 200”C, 600 Volts.Wire, Electrical, Fluorinated Ethylene Propylene(FEP) Insulated, 200C, 1000 Volts.5Pro

10、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-E-917E(NAVY)MILITARY (Continued)MIL-M-17059,MIL-M-17060MIL-I-17205MIL-T-17221MIL-C-17361MIL-M-17413MIL-M-17556MIL-C-17587MIL-C-17588DOD-S-17773MIL-P-18177MIL-F-18240MIL-F-18327MIL-S-li396MIL-I-19166MIL

11、-F-19207,.MIL-S-19500MIL-R-19523MIL-I-19632MIL-c-19836MIL-I-19917MIL-S-20.708Motors, 60-Cycle, AC, Fractional H.P. (ShipboardUse) .Motors, 60-Hertz, Alternating Current,Integral-Horsepower Shipboard Use.Insulation”Cloth and Tape, Electrical, GlassFiber, Varnished.Transformers, Power, Distribution; S

12、ingle Ph=w400 Hertz, Insulation System Class 200C,Dry(Air Cooled) (Naval ShipboardUse).Circuit Breakers, Air, Electric, Insulated Housing(Shipboard Use), General Specification for.Motors, Direct Current, Integral H.P., Naval-Shipboard.Motori Direct-Current, Fractional HP (ShipboardUse) .Circuit Brea

13、kers, Low Voltage, Electric ?ower,Air, Open Frame, Removable Construction.Circuit Breakers (Automatic - ALB-l) High Pass, Low Pass,Band Pass, BandSuppression, and Dual “Functioning, GeneralSpecification for.,Switches, Meter and Control, Naval Shipboard.Insulation Tape, Electrical, High-Temperature,G

14、lass Fiber, Pressure-Sensitive.Fuseholders, Extractor Post Type, Blown FuseIndicating and Nonindicating General Specif3.ca-tion for.Semiconductor Devices, General Specification for.Relays, Control.Insulation, Electrical, Dielectric Barrier,Laminated, Plastic Film and Rag Paper.Coolers, I?ltiid,Indus

15、trial, Air, Motor andGenerator, Naval Shipboard.Insulation Sheet, Electrical, Mica Paper, SiliconeBonded.Synchros, General Specification for./,/I6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MILITARY (Continued)MIL-T-21038MIL-I-2107OMIL-F-21346MIL

16、-F-21346/lMIL-S-21604MIL-F-21608MIL-E-22118MIL-I-22129MIL-S-22432MIL-S-2271OMIL-I-22834MIL-S-22885MIL-I-23053MIL-V-23151MIL-M-23167MIL-S-23190MIL-T-23648MIL-L-23886MIL-I-24092MIL-G-24139MIL-I-24178MIL-I-24204MIL-P-24212MIL-S-24236MIL-D-24304MIL-M-24325MIL-M-24350Transformers, Pulse, Low Power, Gener

17、al Specifica-tion forInsulating Sheet and Tape, Electrical, ReinforcedMica Paper.Fuseholders, Block, and Shroud Type, andAssociated Fuse Clips; General Specification for.Fuse Clip, Electrical; Styles FC21, FC22, FC23,-and FC25.Switches, Rotary, Multipole and Selector, GeneralSpecification for.Ferrul

18、e, Shield Terminating, Crimp Style.Enamel, Electrical-Insulating.Insulation Tubing, Electrical, Polytetrafluoro-ethylene Resin, Nonrigid.Servo Motors General Specification.Switches, Rotary (Printed Circuit), (Thumbwheel,Incline, and Pushbutton), General Specificationfor.Insulation, Electrical, Diele

19、ctric Barrier,Laminated, Plastic Film and Synthetic Fiber Mat.Switches, Push Button, Illuminated, GeneralSpecification for.Insulation Sleeving, Electrical, Heat Shrinkable, : .-General Specification for.Voltmeter, Expanded Scale Switchboard Type”(NavalShipboard Use).Meter, Frequency, Expanded Scale

20、Switchboard Type(Naval Shipboard Use).Straps, Clamps, and Mounting Hardware, Plastic andMetal for Cable Harness Tying and Support.Thermistor, (ThermallySensitive Resistor), Insulated, General Specification for.Liquid Level Indicating Equipment (Electrical).Insulating Varnishes and Solventless “Resin

21、sforApplication by the Dip Process.Grease, Multipurpose, Water Resistant.Insulation Tape, Electrical, Semi-Cured Thermo-setting Resin Treated Glass,Armature Banding,Naval Shipboard.Insulation, Electrical, High Temperature, Bonded,Synthetic Fiber Paper.Pressure Transducer Equipment (Electrical).Switc

22、hes, Thermostatic, (Metallic and Bimetallic)General Specification for.Differential Pressure Transducer Equipment(Electrical) (Naval Shipboard Use).Molding Material, Plastic, Epoxy CompoundsThermosetting.Monitors, Reverse Power and Power-Sensing,Electric Power (Naval Shipboard Use). (Metric)7“Provide

23、d by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MILITARY (Continued)MIL-M-24359 -MIL-P-”24364 -MIL-P-24364/l. -MIL-P-24364/2 -MIL-P-24364/3 -MIL-T-24387 -MIL-T-24388 -,MIL-I-24391 -MIL-P-24441 -DOD-G-24508 -MIL-S-24561 -MIL,H-24s92 -MIL-C-24707MIL-C-24707/5

24、.MIL-C-24712MIL-R-28750MIL-R-28803MIL-C-28809MIL-M-3851OMIL-C-39003.MIL-C-39006 -MIL-C-39006/22 -(1MIL-C-39014 -MIL-T-43435 -,.MIL-E-917E(NAVY)Meters, Millimeters, DirectCurrent Panel(Edgewise Types).Plastic Sheets, Laminated, Thermosetting,Electrical Insulating Sheet, Glass-Mat.Plastic Sheets, Lami

25、nated, ThermosettingMountingElectrical-Insulating Sheet, Polyester Glass-MatGrade GPO-N1 (Classes 130, 155, and 180). -Plastic Sheets, Laminated, ThermosettingElectrical-Insulating Sheet, Polyester Glass-MatGrade GPO-N2 (Class 130).Plastic Sheets, Laminated,.ThermosettingElectrical-Insulating Sheet,

26、 Polyester Glass-MatGrade GPO-N3.Temperature Measurement EquipmentSignal Con-ditioner and Power Supply (Electrical) (NavalShipboard Use).Thermocouple and Resistance Temperature DetectorAssemblies, Genera! Specification for (NavalShipboard).Insulation Tape, Electrical, Plastic, Pressure-Sensitive.Pai

27、nt, Epoxy-Polyamide General Specification for.Grease, High Performance, Multipurpose,. (Metric)Sensing and Signaling Device, Current-Time (CTS)(Naval Shipboard Use).Hose Assembly, Tetrafluor,oethylene Tube, Non-collapsible, High Temperature.Castings, Ferrous, General Specification .for.Castings, Duc

28、tileIron and Austenitic DuctileIroq.Coatings, Powdered Epoxy. (Metric)Relays, Solid State, General Specification for.Readouts, Segmented, General Specification for.Circuit Card Assemblies, Rigid, Flexible, Rigid-Flex.Microcircuits, General Specification for.Capacitors, Fixed, Electrolytic (SolidElec

29、trolyte), Tantalum, Established Reliability,General Specification” for.Capacitors, Fixed, Electrolytic (NonsolidElectrolyte), Tantalum, Established Reliability,General Specification for.Capacitors, Fixed, Electrolytic (NonsolidElectrolyte), Tantalum, (Polarized, SinteredSlug), 85C (Voltage Derated t

30、o 125”C),Established Reliability, Style CLR79.Capacitors, Fixed, Ceramic Dielectric (GeneralPurpose) Established Reliability, GeneralSpecification for.Tape, Lacing and Tying.8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MILITARY (Continued)MIL-I-4

31、6058 -MIL-P-53084 -MIL-P-5511O -MIL-T-55164 -MIL-W-81044 -MIL-W-81044/8 -MIL-W-81044/9 -MIL-W-81044/10 -MIL-w-81044/11 -MIL-W-81044/12 -MIL-W-81044/13 -MIL-G-81322 -MIL-W-81381 -MIL-w-81381/12 -MIL-W-81381/22 -MIL-H-81829 -MIL-R-83401 -MIL-C-83421 -MIL-C-83488 -MIL-E-917E(NAVY)Insulating Compound, E

32、lectrical (for CoatingPrinted Circuit Assemblies).Primer, Cathodic Electrodeposition, Chemical AgentResistant.Printed-Wiring Boards General Specification for.Terminal Boards, Molded, Barrier Screw and StudTypes, and Associated Accessories, General -Specification for.Wire, Electric, Crosslinked Polya

33、lkene, Cross-linked Alkane-Imide Polymer, or PolyaryleneInsulated, Copper or Copper Alloy.Wire, Electric, Crosslinked Polyalkene Insulated, ” ,Silver-Coated Copper, Mediuq Weight, 600-Volt,150c.Wire, Electric, Crosslinked Polyalkene Insulated,Tin-Coated Copper, Medium Weight, 600-Volt,150”C.Wire, El

34、ectric, Crosslinke”d Polyalkene Insulated,Silver-Coated High Strength Copper Alloy, MediumWeight, 600-Volt, 150C.Wire, Electric, Crosslinked Polyalkene Insulated.,Silver-Coated Copper, Light Weight, 600-Volt,150c.Wire, Electric, Crosslinked Polyalkene Insulated,Tin-Coated Copper, Light Weight, 600-V

35、olt, 150”C.Wire, Electric, Crosslinked Polyalkene Insulated,Silver-Coated High Strength Copper Alloy, LightWeight, 600-Volt, 150”C.Grease, Aircraft, General Purpose, Wide Tempera-ture Range, NATO Code Number G-395.Wire, Electric, Polyimide-Insulated, Copper orCopper Alloy.Wire, Electric, Fluorocarbo

36、n/Polyimide Insulated,Medium Weight, Nickel Coated Copper Conductor,600 Volts, 200C, Nominal 8.4 or 15.4 Mil Wall.Wire, Electric, Fluo”rocarbon/Polyimide Insulated,Medium Weight, Tin Coated Copper Conductor, 600Volts, 150C, Nominal 8.4 or 15.4 Mil Wall.Heat Transfer Fluid, Fluorochemical.Resistor Ne

37、tworks, Fixed, Film, and Capacitor-Resistor Networks, Ceramic Capacitor and FixedFilm Resistors, General Specification for.Capacitors, Fixed, Supermetallized Plastic Film Dielectric, (DC, AC, or DC andAC), HermeticallySealed in Metal Cases,.Established Reliability,General Specification for.Coating,

38、Aluminum, High Purity.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-E-917E(NAVY)IMILITARY (Continued)STANDARDSFEDERALFED-STD-H28 -FED-STD-595 -MILITARYMIL-STD-108 -MIL-STD-109 -MIL-STD-129 -MIL-STD-167-1 -MIL-STD-195MIL-STD-198MIL-STD-199MIL-ST

39、D-202MIL-STD-242MIL-STD-275MIL-STD-280MIL-STD-415MIL-STD-438MIL-STD-454MIL-STD-461MIL-STD-681MIL-STD-701.-MIL-STD-740-1 -MIL-STD-740-2 -MIL-STD-777 -MIL-STD-889 -MIL-STD-970 -MIL-STD”-131O -MIL-STD-1346 -MIL-STD-1353 -111Screw-Thread Standards for Federal Services.Colors Used in Government Procureme

40、nt.Definitions of and Basic Requirements for Enclo-sures for Electric and Electronic Equipment.Quality Assurance Terms and Definitions.Marking for Shipment and Storage.Mechanical Vibrations of Shipboard Equipment (TypeI - Environmental and Type II - InternallyExcited).Marking of Connections for Elec

41、tric Assemblies.Capacitors, Selection and Use of.Resistors, Selection and Use of.Test Methods for Electronic and ElectricalComponent Parts.Electronic Equipment Parts Selected Standards.Printed Wiring for Electron,ic,Equipment.Definitions of Item Levels, Item Exchangeability,Models, and Related Terms

42、.Test Provisions for Electronic Systems andAssociated Equipment, Design Criteria for.Schedule of Piping, Valves, Fittings, andAssociated Piping Components for SubmarinesService.Standard General Requirements for ElectronicEquipment.Electromagnetic Emission andSusceptibilityRequirements for the Contro

43、l of ElectromagneticInterference.Identification Coding and Application of Hookup andLead Wire.Lists of Standard Semiconductor Devices.Airborne Sound Measurements and”Acceptance Criteriaof Shipboard Equipment.Structurebome Vibratory Acceleration Measurementsand Acceptance Criteria of Shipboard Equipm

44、ent.Schedule of P$ping, Valves, Fittings, andAssociated Piping ComponentsShips.Dissimilar Metals.Standards and Specifications,for the Selection of.Shipboard Bonding, Grounding,for Naval SurfaceOrder of Precedenceand Other Techniquesfor Electromagnetic Compatibility and Safety.,Relays Selection and A

45、pplication.Electrical Connectors, Plug-In Sockets andAssociated Hardware, Selection and Use Of.10Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-E-917E(NAVY)MILITARY (Continued)MIL-STD-1364 -MIL-STD-1378 -DOD-STD-1399, -Section 070-Part 1MIL-STD-

46、1399, -Section 300DOD-STD-1399, -Section 532MIL-STD-1562 -MIL-STD-1683 -MIL-STD-1686 -, MIL-STD-2000 -DOD-STD-2143 -MIL-sTD-2164 -MS17828MS17829MS17830MS21208 .-MS21209MS21250MS21919MS35335(I(1:eneral Purpose Electronic Test Equipment.Requirements for”Employing Standard ElectronicModules.Interface S

47、tandard for Shipboard Systems Section070 - Part 1 D.C. Magnetic Field Environment.(Metric)Interface Standard for Shipboard Systems Section300 Electric Power, Alternating Current. (Metric)Interface Standard for Shipboard Systems Section532 Cooling Water for Support of ElectronicEquipment. (Metric)Lis

48、ts of StandardMicrocircuits.Connections and Jacketed Cable, Electrical,Selection Standard for Shipboard Use.Electrostatic Discharge Control Program forProtection of Electrical and Electronic Parts,Assemblies and Equipment (Excluding ElectricallyInitiated Explosive Devices). (Metric)Standard Requirem

49、ents for Soldered Electrical andElectronic Assemblies.!iagneticSilencing Requirements for the Construc-tion of Nonmagnetic Ship and Craft. (Metric)Environmental Stress Screening ProcessforElectronic Equipment.Nut, Self-Locking, Hexagon, Regar-Height, (Non-Metallic Insert) 250”F, Nickel-Copper Alloy.Nut, Self-Locking, Hexagon, Regular Height, 250”F,(Non-Metallic Insert) Non-Corrosion-ResistantSteel.Nut, Self-Locking, Hexagon, Regular He