ITU-T Q 4002 3-2016 Originating identification presentation and originating identification restriction using IP multimedia core network subsystem Conformance testing C Part 3 User S.pdf

《ITU-T Q 4002 3-2016 Originating identification presentation and originating identification restriction using IP multimedia core network subsystem Conformance testing C Part 3 User S.pdf》由会员分享，可在线阅读，更多相关《ITU-T Q 4002 3-2016 Originating identification presentation and originating identification restriction using IP multimedia core network subsystem Conformance testing C Part 3 User S.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、 I n t e r n a t i o n a l T e l e c o m m u n i c a t i o n U n i o n ITU-T Q.4002.3 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (02/2016) SERIES Q: SWITCHING AND SIGNALLING Testing specifications Testing specifications for SIP-IMS Originating identification presentation and originating identif

2、ication restriction using IP multimedia core network subsystem; Conformance testing Part 3: User side; Test suite structure and test purposes Recommendation ITU-T Q.4002.3 ITU-T Q-SERIES RECOMMENDATIONS SWITCHING AND SIGNALLING SIGNALLING IN THE INTERNATIONAL MANUAL SERVICE Q.1Q.3 INTERNATIONAL AUTO

3、MATIC AND SEMI-AUTOMATIC WORKING Q.4Q.59 FUNCTIONS AND INFORMATION FLOWS FOR SERVICES IN THE ISDN Q.60Q.99 CLAUSES APPLICABLE TO ITU-T STANDARD SYSTEMS Q.100Q.119 SPECIFICATIONS OF SIGNALLING SYSTEMS No. 4, 5, 6, R1 AND R2 Q.120Q.499 DIGITAL EXCHANGES Q.500Q.599 INTERWORKING OF SIGNALLING SYSTEMS Q.

4、600Q.699 SPECIFICATIONS OF SIGNALLING SYSTEM No. 7 Q.700Q.799 Q3 INTERFACE Q.800Q.849 DIGITAL SUBSCRIBER SIGNALLING SYSTEM No. 1 Q.850Q.999 PUBLIC LAND MOBILE NETWORK Q.1000Q.1099 INTERWORKING WITH SATELLITE MOBILE SYSTEMS Q.1100Q.1199 INTELLIGENT NETWORK Q.1200Q.1699 SIGNALLING REQUIREMENTS AND PRO

5、TOCOLS FOR IMT-2000 Q.1700Q.1799 SPECIFICATIONS OF SIGNALLING RELATED TO BEARER INDEPENDENT CALL CONTROL (BICC) Q.1900Q.1999 BROADBAND ISDN Q.2000Q.2999 SIGNALLING REQUIREMENTS AND PROTOCOLS FOR THE NGN Q.3000Q.3899 TESTING SPECIFICATIONS Q.3900Q.4099 Testing specifications for next generation netwo

6、rks Q.3900Q.3999 Testing specifications for SIP-IMS Q.4000Q.4039 Testing specifications for Cloud computing Q.4040Q.4059 For further details, please refer to the list of ITU-T Recommendations. Rec. ITU-T Q.4002.3 (02/2016) i Recommendation ITU-T Q.4002.3 Originating identification presentation and o

7、riginating identification restriction using IP multimedia core network subsystem; Conformance testing Part 3: User side; Test suite structure and test purposes Summary Recommendation ITU-T Q.4002.3 v.1 (2016) is part 3 of the testing specifications for originating identification presentation/origina

8、ting identification restriction (OIP/OIR) services implemented on an IMS basis on the user side. This Recommendation specifies the test suite structure and test purposes (TSS Conformance testing Part 3: User side; Test suite structure and test purposes 1 Scope This Recommendation provides the user e

9、quipment related test suite structure and test purposes (TSS users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regul

10、arly published. The reference to a document within this Recommendation does not give it, as a stand-alone document, the status of a Recommendation. ITU-T Q.3618 v.1 Recommendation ITU-T Q.3618 v.1, Originating identification presentation and originating identification restriction using IP multimedia

11、 core network subsystem Protocol specification. ITU-T Q.4002.1 v.1 Recommendation ITU-T Q.4002.1 v.1, Originating identification presentation and originating identification restriction using IP multimedia core network subsystem; Conformance testing Part 1: Network side and user side; Protocol implem

12、entation conformance statement. ITU-T Q.4002.2 v.1 Recommendation ITU-T Q.4002.2 v.1, Originating identification presentation and originating identification restriction using IP multimedia core network subsystem; Conformance testing Part 2: Network side; Test suite structure and test purposes. ITU-T

13、 X.290 Recommendation ITU-T X.290 (1995), OSI conformance testing methodology and framework for protocol Recommendations for ITU-T applications General concepts. IETF RFC 3323 IETF RFC 3323 (2002), A Privacy Mechanism for the Session Initiation Protocol (SIP). 3 Definitions For the purposes of this

14、Recommendation, the terms and definitions given in ETSI TS 186 006-2 V4.0.1 and the following apply: 2 Rec. ITU-T Q.4002.3 (02/2016) 3.1 implementation under test (IUT): Refer to ITU-T X.290. 3.2 PICS proforma: Refer to ITU-T X.290. 3.3 point of control and observation: Refer to ITU-T X.290. 3.4 pro

15、tocol implementation conformance statement (PICS): Refer to ITU-T X.290. 3.5 system under test (SUT): Refer to ITU-T X.290. 3.6 test purpose (TP): Refer to ITU-T X.290. NOTE This may contain additional information. 4 Abbreviations and acronyms This Recommendation uses the following abbreviations and

16、 acronyms: CLIR Calling Line Identification Restriction IUT Implementation Under Test OIP Originating Identification Presentation OIR Originating Identification Restriction SUT System Under Test 5 Test suite structure (TSS) User CallingUser OIP_U01_xxx CalledUser OIP_U02_xxx 5.1 Configuration The sc

17、ope of the current specification is to test the signalling and procedural aspects of the stage 3 requirements as described in ITU-T Q.3618 v.1. The stage 3 description defines the requirements for several network entities and also the requirements regarding terminal devices. Therefore several interf

18、aces (reference points) are addressed to satisfy the test of the different entities. Therefore to test the appropriate entities the configurations below are applicable: 5.1.1 Testing of the UE There are special clauses in the protocol standard describing the procedures that apply at the originating

19、and terminating user equipment. Therefore the test configuration in Figure 5.1.1-1 has been chosen. Figure 5.1.1-1 Applicable configuration to test UE functionalities Rec. ITU-T Q.4002.3 (02/2016) 3 6 Test purposes (TP) 6.1 Introduction For each test requirement a TP is defined. 6.1.1 TP naming conv

20、ention Test purposes (TPs) are numbered, starting at 001, within each group. Groups are organized according to the TSS. Additional references are added to identify the actual test suite and whether it applies to the network or the user (see Table 6.1.1-1). Table 6.1.1-1 TP identifier naming conventi

21、on scheme Identifier: _ = supplementary service: e.g., “OIP“ = type of IUT: U User - equipment N Network = group 2 digit field representing group reference according to TSS = sequential number (001 to 999) 6.1.2 Test strategy ITU-T Q.3618 v.1 contains no explicit requirements for testing, the TPs we

22、re generated as a result of an analysis of the base standard and the protocol implementation conformance statement (PICS) specification which are specified in ITU-T Q.4002.1 v.1. 6.2 User TPs for OIP and OIR All PICS items referred to in this clause are as specified in ITU-T Q.4002.1 v.1 unless indi

23、cated otherwise by another numbered reference. 6.2.1 Calling user TSS User/Calling_User TP OIP_U01_001 OIP reference clause 4.5.2.1 of ITU-T Q.3618 v.1 Selection expression PICS 5.1/1 AND PICS 5.2/2 Test purpose: Originating user sends a P-Preferred Identity. Ensure that the IUT, in order to present

24、 a complete calling user identity with which it is registered, sends an INVITE message containing a P-Preferred-Identity header with valid tel or SIP URI defined as USER_URI in Table 6.2.1-1. Preconditions: The user registers the public user identity. Comments: User Equipment Test Equipment INVITE I

25、NVITE TSS User/Calling_User TP OIP_U01_002 OIP reference clause 4.5.2.1 of ITU-T Q.3618 v.1 Selection expression PICS 5.1/1 Test purpose: Originating user sends a P-Preferred Identity and wishes to override the default setting Presentation restricted. Ensure that the IUT, in order to present a compl

26、ete calling user identity with which it is registered and to override the OIR default settings of presentation restricted, sends an INVITE message containing a P-Preferred-Identity header with valid tel or SIP URI defined as USER_URI and a Privacy header set to “none“. Comments: User Equipment Test

27、Equipment INVITE INVITE 4 Rec. ITU-T Q.4002.3 (02/2016) User/Calling_User TP OIP_U01_003 OIP reference clause 4.5.2.1 of ITU-T Q.3618 v.1 Selection expression PICS 5.1/1 Test purpose: Originating user sends an anonymous From header and wishes to override the default setting Presentation not restrict

28、ed. Ensure that the IUT, in order to override the OIR default settings of presentation not restricted, sends an INVITE message not containing a P-Preferred-Identity header and containing a Privacy header set to “id“ or “header“ and containing an anonymous From header. The convention for configuring

29、an anonymous From header is described in RFC 3323 and should be followed; i.e., From: “Anonymous“ ;tag= xxxxxx. Preconditions: User Equipment Tert Equipment INVITE INVITE Table 6.2.1-1 Values for test purposes OIP_U02_001 USER_URI VA_1 tel: local number VA_2 tel: global number VA_3 tel: local number

30、 ; phone-context= particular phone prefix. VA_4 tel: local number ; phone-context= domainname VA_5 tel: local number; isub= ISDN Subadress VA_6 SIP URI sip:user:passwordhost:port;uri-parameters VA_7 sip URI: local number host:port;uri-parameters VA_8 sip URI: global number host:port;uri-parameters V

31、A_9 sip URI: local number ; phone-context= particular phone prefix host:port;uri-parameters 6.2.2 Called user TSS User/Called_User TP OIP_U02_001 OIP reference 4.5.2.12 of ITU-T Q.3618 v.1 Selection expression PICS 5.1/1 Test purpose: Terminating user receives a P-Asserted identity header field. Ens

32、ure that the terminating UE, receiving a valid and compatible INVITE message containing one P-Asserted-Identity header indicating a public user identity defined as URI_USER in Table 6.2.1-2, accepts the call following the basic call procedures. Comments: User Equipment Test Equipment INVITE INVITE T

33、SS User/Called_User TP OIP_U02_002 OIP reference 4.5.2.12 of ITU-T Q.3618 v.1 Selection expression PICS 5.1/1 Test purpose: Terminating user receives a P-Asserted identity header field. Ensure that the terminating UE, receiving a valid and compatible INVITE message containing two P-Asserted-Identity

34、 headers indicating public user identities defined as URI_USER in table 6.2.1-2 accepts the call following the basic call procedures. Comments: User Equipment SUT Test Equipment INVITE INVITE Rec. ITU-T Q.4002.3 (02/2016) 5 Table 6.2.1-2 Values for test purposes OIP_U02_001 and 002 USER_URI VA_1 tel

35、: local number VA_2 tel: global number VA_3 tel: local number ; phone-context= particular phone prefix. VA_4 tel: local number ; phone-context= domainname VA_5 tel: local number; isub= ISDN Subadress VA_6 SIP URI sip:user:passwordhost:port;uri-parameters VA_7 sip URI: local number host:port;uri-para

36、meters VA_8 sip URI: global number host:port;uri-parameters VA_9 Sip URI: local number ; phone-context= particular phone prefix host:port;uri-parameters Printed in Switzerland Geneva, 2016 SERIES OF ITU-T RECOMMENDATIONS Series A Organization of the work of ITU-T Series D General tariff principles S

37、eries E Overall network operation, telephone service, service operation and human factors Series F Non-telephone telecommunication services Series G Transmission systems and media, digital systems and networks Series H Audiovisual and multimedia systems Series I Integrated services digital network S

38、eries J Cable networks and transmission of television, sound programme and other multimedia signals Series K Protection against interference Series L Environment and ICTs, climate change, e-waste, energy efficiency; construction, installation and protection of cables and other elements of outside pl

39、ant Series M Telecommunication management, including TMN and network maintenance Series N Maintenance: international sound programme and television transmission circuits Series O Specifications of measuring equipment Series P Terminals and subjective and objective assessment methods Series Q Switchi

40、ng and signalling Series R Telegraph transmission Series S Telegraph services terminal equipment Series T Terminals for telematic services Series U Telegraph switching Series V Data communication over the telephone network Series X Data networks, open system communications and security Series Y Global information infrastructure, Internet protocol aspects, next-generation networks, Internet of Things and smart cities Series Z Languages and general software aspects for telecommunication systems