ITU-T G 8271 1 AMD 1-2018 Network limits for time synchronization in packet networks Amendment 1 (Study Group 15).pdf

《ITU-T G 8271 1 AMD 1-2018 Network limits for time synchronization in packet networks Amendment 1 (Study Group 15).pdf》由会员分享，可在线阅读，更多相关《ITU-T G 8271 1 AMD 1-2018 Network limits for time synchronization in packet networks Amendment 1 (Study Group 15).pdf（60页珍藏版）》请在麦多课文档分享上搜索。

1、 I n t e r n a t i o n a l T e l e c o m m u n i c a t i o n U n i o n ITU-T G.8271.1/Y.1366.1 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU Amendment 1 (03/2018) SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Packet over Transport aspects Synchronization, quality and avail

2、ability targets SERIES Y: GLOBAL INFORMATION INFRASTRUCTURE, INTERNET PROTOCOL ASPECTS, NEXT-GENERATION NETWORKS, INTERNET OF THINGS AND SMART CITIES Internet protocol aspects Transport Network limits for time synchronization in packet networks Amendment 1 Recommendation ITU-T G.8271.1/Y.1366.1 (201

3、7) Amendment 1 ITU-T G-SERIES RECOMMENDATIONS TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS INTERNATIONAL TELEPHONE CONNECTIONS AND CIRCUITS G.100G.199 GENERAL CHARACTERISTICS COMMON TO ALL ANALOGUE CARRIER-TRANSMISSION SYSTEMS G.200G.299 INDIVIDUAL CHARACTERISTICS OF INTERNATIONAL CA

4、RRIER TELEPHONE SYSTEMS ON METALLIC LINES G.300G.399 GENERAL CHARACTERISTICS OF INTERNATIONAL CARRIER TELEPHONE SYSTEMS ON RADIO-RELAY OR SATELLITE LINKS AND INTERCONNECTION WITH METALLIC LINES G.400G.449 COORDINATION OF RADIOTELEPHONY AND LINE TELEPHONY G.450G.499 TRANSMISSION MEDIA AND OPTICAL SYS

5、TEMS CHARACTERISTICS G.600G.699 DIGITAL TERMINAL EQUIPMENTS G.700G.799 DIGITAL NETWORKS G.800G.899 DIGITAL SECTIONS AND DIGITAL LINE SYSTEM G.900G.999 MULTIMEDIA QUALITY OF SERVICE AND PERFORMANCE GENERIC AND USER-RELATED ASPECTS G.1000G.1999 TRANSMISSION MEDIA CHARACTERISTICS G.6000G.6999 DATA OVER

6、 TRANSPORT GENERIC ASPECTS G.7000G.7999 PACKET OVER TRANSPORT ASPECTS G.8000G.8999 Ethernet over Transport aspects G.8000G.8099 MPLS over Transport aspects G.8100G.8199 Synchronization, quality and availability targets G.8200G.8299 Service Management G.8600G.8699 ACCESS NETWORKS G.9000G.9999 For fur

7、ther details, please refer to the list of ITU-T Recommendations. Rec. ITU-T G.8271.1/Y.1366.1 (2017)/Amd.1 (03/2018) i Recommendation ITU-T G.8271.1/Y.1366.1 Network limits for time synchronization in packet networks Amendment 1 Summary Recommendation ITU-T G.8271.1/Y.1366.1 specifies the maximum ne

8、twork limits of phase and time error that shall not be exceeded. It specifies the minimum equipment tolerance to phase and time error that shall be provided at the boundary of packet networks at phase and time synchronization interfaces. It also outlines the minimum requirements for the synchronizat

9、ion function of network elements. This Recommendation addresses the case of time and phase distribution across a network by a packet-based method with full timing support to the protocol level from the network. Amendment 1 provides the following updates: changes to clause 7 (Network limits); minor e

10、nhancements to Appendix III; amendment to Appendix V; replacement of Appendix VII; replacement of Figure IX.1; addition of new Appendix X; addition of new Appendix XI; addition of a Bibliography. History Edition Recommendation Approval Study Group Unique ID* 1.0 ITU-T G.8271.1/Y.1366.1 2013-08-29 15

11、 11.1002/1000/12034 1.1 ITU-T G.8271.1/Y.1366.1 (2013) Amd. 1 2014-05-14 15 11.1002/1000/12194 1.2 ITU-T G.8271.1/Y.1366.1 (2013) Amd. 2 2015-01-13 15 11.1002/1000/12392 2.0 ITU-T G.8271.1/Y.1366.1 2017-10-07 15 11.1002/1000/13323 2.1 ITU-T G.8271.1/Y.1366.1 (2017) Amd. 1 2018-03-16 15 11.1002/1000/

12、13550 Keywords Full timing support, network limits, precision time protocol, phase, synchronization, time. _ * To access the Recommendation, type the URL http:/handle.itu.int/ in the address field of your web browser, followed by the Recommendations unique ID. For example, http:/handle.itu.int/11.10

13、02/1000/11830-en. ii Rec. ITU-T G.8271.1/Y.1366.1 (2017)/Amd.1 (03/2018) FOREWORD The International Telecommunication Union (ITU) is the United Nations specialized agency in the field of telecommunications, information and communication technologies (ICTs). The ITU Telecommunication Standardization

14、Sector (ITU-T) is a permanent organ of ITU. ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis. The World Telecommunication Standardization Assembly (WTSA), which meets e

15、very four years, establishes the topics for study by the ITU-T study groups which, in turn, produce Recommendations on these topics. The approval of ITU-T Recommendations is covered by the procedure laid down in WTSA Resolution 1. In some areas of information technology which fall within ITU-Ts purv

16、iew, the necessary standards are prepared on a collaborative basis with ISO and IEC. NOTE In this Recommendation, the expression “Administration“ is used for conciseness to indicate both a telecommunication administration and a recognized operating agency. Compliance with this Recommendation is volu

17、ntary. However, the Recommendation may contain certain mandatory provisions (to ensure, e.g., interoperability or applicability) and compliance with the Recommendation is achieved when all of these mandatory provisions are met. The words “shall“ or some other obligatory language such as “must“ and t

18、he negative equivalents are used to express requirements. The use of such words does not suggest that compliance with the Recommendation is required of any party. INTELLECTUAL PROPERTY RIGHTSITU draws attention to the possibility that the practice or implementation of this Recommendation may involve

19、 the use of a claimed Intellectual Property Right. ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation development process. As of the date of approval of this Recomme

20、ndation, ITU had not received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementers are cautioned that this may not represent the latest information and are therefore strongly urged to consult the TSB patent database at h

21、ttp:/www.itu.int/ITU-T/ipr/. ITU 2018 All rights reserved. No part of this publication may be reproduced, by any means whatsoever, without the prior written permission of ITU. Rec. ITU-T G.8271.1/Y.1366.1 (2017)/Amd.1 (03/2018) iii Table of Contents Page 1 Scope . 1 2 References . 1 3 Definitions 2

22、3.1 Terms defined elsewhere 2 3.2 Terms defined in this Recommendation . 2 4 Abbreviations and acronyms 2 5 Conventions 3 6 Network reference model . 3 7 Network limits 3 7.1 Network limits at reference point A . 4 7.2 Network limits at reference point B . 4 7.3 Network limits at reference point C .

23、 4 7.4 Network limit at reference point D . 6 Appendix I Clock models for noise accumulation simulations 7 I.1 T-BC models for noise accumulation simulations . 7 I.2 End-to-end TC models for noise accumulation simulations 10 Appendix II Hypothetical reference models used to derive the network limits

24、 13 II.1 HRM composed of T-BCs 13 II.2 HRM composed of T-BCs and T-TCs 19 Appendix III Network limits considerations . 20 III.1 Measurement of network limits in deployment case 1 . 20 Appendix IV Constant and dynamic time error and error accumulation 23 IV.1 Introduction 23 IV.2 Components of time e

25、rror . 23 IV.3 Accumulation of time error in a chain of clocks 24 Appendix V Example of design options . 26 V.1 Network limits 26 V.2 Components of time error budgets . 26 V.3 Failure scenarios . 27 V.4 Time error budget allocation 28 V.5 Operator options . 29 V.6 Further details . 29 Appendix VI Mi

26、tigation of time error due to synchronous Ethernet transients 34 Appendix VII Maximum relative time error . 35 Appendix VIII Models for budgeting in a chain of microwave devices . 39 Appendix IX Models for budgeting in a chain of xPON or xDSL devices 42 Appendix X Time error and transients due to PT

27、P rearrangement . 45 iv Rec. ITU-T G.8271.1/Y.1366.1 (2017)/Amd.1 (03/2018) Page Appendix XI Measurement of maximum relative time error limits . 46 XI.1 Measurement of maximum relative time error limits . 46 Bibliography. 51 Rec. ITU-T G.8271.1/Y.1366.1 (2017)/Amd.1 (03/2018) 1 Recommendation ITU-T

28、G.8271.1/Y.1366.1 Network limits for time synchronization in packet networks Amendment 1 Editorial note: This is a complete-text publication. Modifications introduced by this amendment are shown in revision marks relative to Recommendation ITU-T G.8271.1/Y.1366.1 (2017). 1 Scope This Recommendation

29、specifies the maximum network limits of phase and time error that shall not be exceeded. It specifies the minimum equipment tolerance to phase and time error that shall be provided at the boundary of packet networks at phase and time synchronization interfaces. It also outlines the minimum requireme

30、nts for the synchronization function of network elements. This Recommendation addresses the case of time and phase distribution across a network with packet-based method with full timing support to the protocol level from the network. The physical layer (PHY) that is relevant to this specification i

31、s the Ethernet media type as defined in IEEE 802.3-2015. 2 References The following ITU-T Recommendations and other references contain provisions which, through reference in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Re

32、commendations and other references are subject to revision; users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regula

33、rly published. The reference to a document within this Recommendation does not give it, as a stand-alone document, the status of a Recommendation. ITU-T G.803 Recommendation ITU-T G.803 (2000), Architecture of transport networks based on the synchronous digital hierarchy (SDH). ITU-T G.810 Recommend

34、ation ITU-T G.810 (1996), Definitions and terminology for synchronization networks. ITU-T G.812 Recommendation ITU-T G.812 (2004), Timing requirements of slave clocks suitable for use as node clocks in synchronization networks. ITU-T G.823 Recommendation ITU-T G.823 (2000), The control of jitter and

35、 wander within digital networks which are based on the 2048 kbit/s hierarchy. ITU-T G.8260 Recommendation ITU-T G.8260 (2015), Definitions and terminology for synchronization in packet networks. ITU-T G.8262 Recommendation ITU-T G.8262/Y.1362 (2015), Timing characteristics of a synchronous Ethernet

36、equipment slave clock. ITU-T G.8271 Recommendation ITU-T G.8271/Y.1366 (2017), Time and phase synchronization aspects of telecommunication networks. ITU-T G.8272 Recommendation ITU-T G.8272/Y.1367 (2015), Timing characteristics of primary reference time clocks. ITU-T G.8273 Recommendation ITU-T G.82

37、73/Y.1368 (2013), Framework of phase and time clocks. 2 Rec. ITU-T G.8271.1/Y.1366.1 (2017)/Amd.1 (03/2018) ITU-T G.8273.2 Recommendation ITU-T G.8273.2/Y.1368.2 (2017), Timing characteristics of telecom boundary clocks and telecom time slave clocks. ITU-T G.8275 Recommendation ITU-T G.8275/Y.1369 (

38、2017), Architecture and requirements for packet-based time and phase distribution. IEEE 802.3-2015 IEEE 802.3-2015, IEEE standard for Ethernet. IEEE 1588-2008 IEEE 1588-2008, IEEE standard for a precision clock synchronization protocol for networked measurement and control systems. 3 Definitions 3.1

39、 Terms defined elsewhere This Recommendation uses the terms and definitions contained in ITU-T G.810 and ITU-T G.8260. 3.2 Terms defined in this Recommendation None. 4 Abbreviations and acronyms This Recommendation uses the following abbreviations and acronyms: CPRI Common Public Radio Interface DSL

40、AM Digital Subscriber Line Access Multiplexer EEC Ethernet Equipment Clock GNSS Global Navigation Satellite System GPON Gigabit-capable Passive Optical Network HRM Hypothetical Reference Model LTE Long-Term Evolution MTIE Maximum Time Interval Error OLT Optical Line Terminal ONT Optical Network Term

41、inal OSC Optical Supervisory Channel OTN Optical Transport Network PHY Physical layer PLL Phase-Locked Loop PPS Pulse Per Second PRC Primary Reference Clock PRTC Primary Reference Time Clock PTP Precision Time Protocol RE Radio Equipment REC Radio Equipment Control RT-DSLAM Remote Terminal-Digital S

42、ubscriber Line Access Multiplexer Rec. ITU-T G.8271.1/Y.1366.1 (2017)/Amd.1 (03/2018) 3 SDH Synchronous Digital Hierarchy SSM Synchronization Status Message SSU Synchronization Supply Unit T-BC Telecom Boundary Clock TDD Time Division Duplex TDEV Time Deviation TE Time Error T-GM Telecom Grand Maste

43、r T-TC Telecom Transparent Clock T-TSC Telecom Time Slave Clock VCO Voltage Controlled Oscillator xDSL x-type Digital Subscriber Line xPON x Passive Optical Network 5 Conventions Within this Recommendation, the following conventions are used: the term precision time protocol (PTP) refers to the PTP

44、protocol defined in IEEE 1588-2008. The terms dynamic time error (TE) and time noise are used interchangeably throughout this Recommendation to indicate jitter and wander components of the timing signal. 6 Network reference model The general network reference model is described in ITU-T G.8271. 7 Ne

45、twork limits The following main (i.e., worst case) scenarios have been identified and are considered in the definition of the relevant network limits: deployment case 1: time distribution chain with telecom time slave clock (T-TSC) integrated into the end application and end application with a distr

46、ibuted architecture. In this case, the performance specification of the T-TSC is outside the scope of ITU-T G.8273.2. deployment case 2: time distribution chain with a T-TSC external to the end application and end application with a distributed architecture. NOTE a specific equipment implementation

47、may also be based on implementing a telecom boundary clock (T-BC) function (instead of a T-TSC function) and delivering the phase/time reference to the end application via a phase/time synchronization distribution interface. In this case, the performance specification of the T-TSC is defined in ITU-

48、T G.8273.2. The deployment cases are shown in Figure 7-1. 4 Rec. ITU-T G.8271.1/Y.1366.1 (2017)/Amd.1 (03/2018) Figure 7-1 Time synchronization deployment cases NOTE 1 An example of distributed architecture is the case of mobile applications where the base stations have the base band unit also calle

49、d radio equipment control (REC) connected remotely to the radio units also called radio equipment (RE). In this case, a point to point connection (e.g., via fibre) is assumed and chain topologies are possible. The TE budget applicable to this connection is assumed to be 150 ns; the details on the chain topology are for further study. NOTE 2 The network limit applicable at reference point E is defined by the specific application as p