ITU-R M 2034-2013 Telegraphic alphabet for data communication by phase shift keying at 31 Bd in the amateur and amateur-satellite services《业余业务和卫星业余业务中31 Bd相移键控的数据通信电报电码表》.pdf

《ITU-R M 2034-2013 Telegraphic alphabet for data communication by phase shift keying at 31 Bd in the amateur and amateur-satellite services《业余业务和卫星业余业务中31 Bd相移键控的数据通信电报电码表》.pdf》由会员分享，可在线阅读，更多相关《ITU-R M 2034-2013 Telegraphic alphabet for data communication by phase shift keying at 31 Bd in the amateur and amateur-satellite services《业余业务和卫星业余业务中31 Bd相移键控的数据通信电报电码表》.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、 Recommendation ITU-R M.2034(02/2013)Telegraphic alphabet for data communication by phase shift keying at 31 Bd in the amateur and amateur-satellite servicesM SeriesMobile, radiodetermination, amateurand related satellite servicesii Rec. ITU-R M.2034 Foreword The role of the Radiocommunication Secto

2、r is to ensure the rational, equitable, efficient and economical use of the radio-frequency spectrum by all radiocommunication services, including satellite services, and carry out studies without limit of frequency range on the basis of which Recommendations are adopted. The regulatory and policy f

3、unctions of the Radiocommunication Sector are performed by World and Regional Radiocommunication Conferences and Radiocommunication Assemblies supported by Study Groups. Policy on Intellectual Property Right (IPR) ITU-R policy on IPR is described in the Common Patent Policy for ITU-T/ITU-R/ISO/IEC r

4、eferenced in Annex 1 of Resolution ITU-R 1. Forms to be used for the submission of patent statements and licensing declarations by patent holders are available from http:/www.itu.int/ITU-R/go/patents/en where the Guidelines for Implementation of the Common Patent Policy for ITU-T/ITU-R/ISO/IEC and t

5、he ITU-R patent information database can also be found. Series of ITU-R Recommendations (Also available online at http:/www.itu.int/publ/R-REC/en) Series Title BO Satellite delivery BR Recording for production, archival and play-out; film for television BS Broadcasting service (sound) BT Broadcastin

6、g service (television) F Fixed service M Mobile, radiodetermination, amateur and related satellite services P Radiowave propagation RA Radio astronomy RS Remote sensing systems S Fixed-satellite service SA Space applications and meteorology SF Frequency sharing and coordination between fixed-satelli

7、te and fixed service systems SM Spectrum management SNG Satellite news gathering TF Time signals and frequency standards emissions V Vocabulary and related subjects Note: This ITU-R Recommendation was approved in English under the procedure detailed in Resolution ITU-R 1. Electronic Publication Gene

8、va, 2013 ITU 2013 All rights reserved. No part of this publication may be reproduced, by any means whatsoever, without written permission of ITU. Rec. ITU-R M.2034 1 RECOMMENDATION ITU-R M.2034 Telegraphic alphabet for data communication by phase shift keying at 31 Bd in the amateur and amateur-sate

9、llite services (Question ITU-R 48-6/5) (2013) Scope This Recommendation establishes a telegraphic alphabet and transmission protocols for phase shift keying at 31 Bd in the amateur and amateur-satellite services. The ITU Radiocommunication Assembly, considering a) that phase shift keying at a data r

10、ate of 31 Bd has become a predominant transmission mode in the amateur and amateur-satellite services; b) that phase shift keying at 31 Bd utilizes a telegraphic alphabet, commonly called “Varicode”, optimized for the English language, in which more frequently used characters occupy fewer bits; c) t

11、hat telegraphic alphabets should be documented and updated from time to time to meet the needs of radiocommunication services, recommends 1 that the Annex should be used to define Varicode characters and their applications in the amateur and amateur-satellite services. Annex 1 Introduction PSK-31 is

12、 a digital communication mode which is intended for live keyboard-to-keyboard conversations, similar to radioteletype. Its data rate is 31.25 Bd (about 50 words per minute), and its narrow bandwidth (approximately 60 Hz at 26 dB) reduces its susceptibility to noise. PSK-31s ITU emission designator i

13、s 60H0J2B. It uses either BPSK modulation without error correction or QPSK modulation with error correction (convolutional encoding and Viterbi decoding). In order to minimize occupied bandwidth, the output is cosine-filtered before reaching the transmitter audio input. PSK-31 is readily monitored a

14、nd the most popular implementations use DSP software running on a computer soundcard. Each transmission has a preamble, an idle signal of continuous zeroes corresponding to continuous phase reversals at the symbol rate of 31.25 reversals/second, and a postamble, continuous unmodulated carrier repres

15、enting a series of logical ones. The absence of phase reversals squelches the decoder. 2 Rec. ITU-R M.2034 While a symbol rate of 31.25 Bd is typical of most amateur service use, the symbol rate can be varied in direct proportion to the frequency of phase reversals. Transmissions at symbol rates as

16、high as 125 Bd have been achieved. 2 Varicode characters Different characters are represented by a variable-length combination of bits called Varicode. Because shorter bit-lengths are used for the more common letters in the English language, Varicode improves efficiency in terms of the average chara

17、cter duration. Varicode is also self-synchronizing. No separate process is needed to define where one character ends and the next begins since the pattern used to represent a gap between two characters (at least two consecutive zeroes) never occurs in a character. Because no Varicode characters can

18、begin or end with a zero (0), the shortest character is a single one (1) by itself. The next is 11, then 101, 111, 1011, and 1101, but not 10, 100, or 1000 (because they end with zeroes), and not 1001 (since it contains two consecutive zeros). This scheme generates the 128-character ASCII set with t

19、en bits. The encoding philosophy, however, accommodates longer bit sequences which allow for additional characters, e.g. accented characters. The Varicode character set is shown below. The codes are transmitted left bit first, with 0 representing a phase reversal on BPSK and 1 representing a steady

20、carrier. A minimum of two zeros is inserted between characters. Some implementations may not handle all the codes below 32. Note that the lower case letters have the shortest patterns and so are the fastest to transmit. The varicode character set control characters Varicode Abbreviation Description

21、1010101011 NUL Null character 1011011011 SOH Start of Header 1011101101 STX Start of Text 1101110111 ETX End of Text 1011101011 EOT End of Transmission 1101011111 ENQ Enquiry 1011101111 ACK Acknowledgment 1011111101 BEL Bell 1011111111 BS Backspace 11101111 HT Horizontal Tab 11101 LF Line feed 11011

22、01111 VT Vertical Tab 1011011101 FF Form feed11111 CR Carriage return1101110101 SO Shift Out 1110101011 SI Shift In1011110111 DLE Data Link Escape Rec. ITU-R M.2034 3 Varicode Abbreviation Description 1011110101 DC1 Device Control 1 (XON) 1110101101 DC2 Device Control 2 1110101111 DC3 Device Control

23、 3 (XOFF) 1101011011 DC4 Device Control 4 1101101011 NAK Negative Acknowledgement 1101101101 SYN Synchronous Idle 1101010111 ETB End of Trans. Block 1101111011 CAN Cancel 1101111101 EM End of Medium 1110110111 SUB Substitute1101010101 ESC Escape 1101011101 FS File Separator 1110111011 GS Group Separ

24、ator 1011111011 RS Record Separator 1101111111 US Unit Separator 1110110101 DEL Delete Printable characters Varicode Glyph Varicode Glyph Varicode Glyph 1 SP 1010111101 1011011111 111111111 ! 1111101 A 1011 a 101011111 “ 11101011 B 1011111 b 111110101 # 10101101 C 101111 c 111011011 $ 10110101 D 101101 d 1011010101 % 1110111 E 11 e 1010111011 111110111 1010110111 111101101 1010111111 1011010111 1010101111 ? 101101101 _