FORD WSS-M2C171-C-2009 OIL ENGINE API CH-4 SJ SERVICE FILL TO BE USED WITH FORD WSS-M99P1111-A 《服务中注入型 API CH-4 SJ发动机油 与标准FORD WSS-M99P1111-A一起使用 》.pdf

《FORD WSS-M2C171-C-2009 OIL ENGINE API CH-4 SJ SERVICE FILL TO BE USED WITH FORD WSS-M99P1111-A 《服务中注入型 API CH-4 SJ发动机油 与标准FORD WSS-M99P1111-A一起使用 》.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M2C171-C-2009 OIL ENGINE API CH-4 SJ SERVICE FILL TO BE USED WITH FORD WSS-M99P1111-A 《服务中注入型 API CH-4 SJ发动机油 与标准FORD WSS-M99P1111-A一起使用 》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2009 11 11 N-STATUS No known use. No Replacement Named D. DiGregorio, NA 2004 05 12 Revised Para 3.0 inserted; para 3.5 & 4 deleted 2001 02 05 Activated M. J. Riley Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC

2、Page 1 of 1 OIL, ENGINE, API CH-4/SJ, WSS-M2C171-C SERVICE FILL NOT TO BE USED FOR NEW DESIGN 1. SCOPE This material specification defines the minimum acceptable performance requirements and physical/chemical properties of engine oils to be used in Ford Motor Company vehicles. 2. APPLICATION This sp

3、ecification was released originally for service fill engine oils meeting the 2001 model vehicle warranty requirements. These materials are used for lubrication of compression ignition engines using diesel fuel. Sections of WSS-M99P1111-A titled QUALITY SYSTEM REQUIREMENTS, SUPPLIERS RESPONSIBILITY,

4、and APPROVAL OF MATERIALS apply only to engine oils supplied directly to Ford Motor Company and its affiliates. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M9

5、9P1111-A). 3.1 QUALITY SYSTEM REQUIREMENTS Material suppliers and part producers must conform to the Companys Quality System Requirements. 3.2 PERFORMANCE Shall meet all the requirements of and be licensed to display API service categories CH-4 and SJ. 3.3 PHYSICAL/CHEMICAL PROPERTIES 3.3.1 Copper C

6、orrosion, max 1b (Dark Orange) (ASTM D 130 or ISO 2160, 3 hrs at 100 C) 3.3.2 Physical Appearance and Odor Shall be clear and bright with no objectionable odor. 3.3.3 Contaminants Shall be free of carcinogens, toxins, metals not removed in refining or from previous use. 3.4 QUALIFICATION It is the s

7、uppliers responsibility to have the technical evidence and documentation certifying that a given formulation (base oil/additive combination) meets all requirements described in this specification. The affected Ford Fuels and Lubricants Engineering activity reserves the right to request certification documentation from any company claiming to meet this specification.