ETSI TS 136 141-2018 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) Base Station (BS) conformance testing (V14 7 0 3GPP TS 36 141 version 14 7 0 Release 14).pdf

《ETSI TS 136 141-2018 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) Base Station (BS) conformance testing (V14 7 0 3GPP TS 36 141 version 14 7 0 Release 14).pdf》由会员分享，可在线阅读，更多相关《ETSI TS 136 141-2018 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) Base Station (BS) conformance testing (V14 7 0 3GPP TS 36 141 version 14 7 0 Release 14).pdf（409页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 136 141 V14.6.0 (2018-01) LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) conformance testing (3GPP TS 36.141 version 14.6.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 136 141 V14.6.0 (2018-01)13GPP TS 36.141 version 14.6.0 Release 14Reference RTS/TSGR-0436

2、141ve60 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can b

3、e downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

4、existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be

5、 subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.

6、org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified witho

7、ut the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are trademarks of ETSI

8、registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 136 141 V14.6.0 (2018-01)23GPP TS 36.141 version 14.6.0 Release 14

9、Intellectual Property Rights Essential patents IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Int

10、ellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, inc

11、luding IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include

12、 trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present

13、document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or r

14、eports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs termi

15、nology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in

16、 ETSI deliverables except when used in direct citation. ETSI ETSI TS 136 141 V14.6.0 (2018-01)33GPP TS 36.141 version 14.6.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 15g31 Scope 16g32 References 16g33 Definitions, symbols and abbreviation

17、s . 17g33.1 Definitions 17g33.2 Symbols 20g33.3 Abbreviations . 21g34 General test conditions and declarations 23g34.1 Measurement uncertainties and Test Requirements . 23g34.1.1 General 23g34.1.2 Acceptable uncertainty of Test System . 23g34.1.2.1 Measurement of transmitter 24g34.1.2.2 Measurement

18、of receiver . 25g34.1.2.3 Measurement of performance requirement . 32g34.1.3 Interpretation of measurement results . 38g34.2 Base station classes 38g34.3 Regional requirements 38g34.4 Selection of configurations for testing 41g34.5 BS Configurations 41g34.5.1 Transmit configurations 41g34.5.1.1 Tran

19、smission with multiple transmitter antenna connectors . 42g34.5.2 Receive configurations . 42g34.5.2.1 Reception with multiple receiver antenna connectors, receiver diversity . 42g34.5.3 Duplexers 43g34.5.4 Power supply options 43g34.5.5 Ancillary RF amplifiers 43g34.5.6 BS with integrated Iuant BS

20、modem 44g34.5.7 BS using antenna arrays 44g34.5.7.1 Receiver tests 44g34.5.7.2 Transmitter tests 45g34.6 Manufacturers declarations of regional and optional requirements 45g34.6.1 Operating band and frequency range 45g34.6.2 Channel bandwidth . 46g34.6.3 Base station output power . 46g34.6.4 Spuriou

21、s emissions Category 46g34.6.5 Additional operating band unwanted emissions . 46g34.6.6 Co-existence with other systems . 47g34.6.7 Co-location with other base stations . 47g34.6.8 Manufacturers declarations of supported RF configurations . 47g34.6.9 NB-IoT sub-carrier spacing 48g34.6.10 NB-IoT powe

22、r dynamic range 48g34.7 Specified frequency range and supported channel bandwidth 49g34.7.1 Base Station RF Bandwidth position for multi-carrier and/or CA testing 49g34.7.2 Aggregated Channel Bandwidth position for Contiguous CA occupied bandwidth testing . 50g34.7.3 NB-IoT testing 50g34.8 Format an

23、d interpretation of tests . 50g34.9 Applicability of requirements . 51g34.10 Test configurations for multi-carrier and/or CA operation . 52g34.10.1 ETC1: Contiguous spectrum operation . 52g34.10.1.1 ETC1 generation . 52g34.10.1.2 ETC1 power allocation . 53g3ETSI ETSI TS 136 141 V14.6.0 (2018-01)43GP

24、P TS 36.141 version 14.6.0 Release 144.10.2 ETC2: Contiguous CA occupied bandwidth . 53g34.10.2.1 ETC2 generation . 53g34.10.2.2 ETC2 power allocation . 53g34.10.3 ETC3: Non-contiguous spectrum operation . 54g34.10.3.1 ETC3 generation . 54g34.10.3.2 ETC3 power allocation . 54g34.10.3.24 VOID . 54g34

25、.10.4 ETC4: Multi-band test configuration for full carrier allocation 54g34.10.4.1 ETC4 generation . 54g34.10.4.2 ETC4 power allocation . 55g34.10.5 ETC5: Multi-band test configuration with high PSD per carrier 55g34.10.5.1 ETC5 generation . 55g34.10.5.2 ETC5 power allocation . 56g34.10.6 ETC6: NB-I

26、oT standalone multi-carrier operation . 56g34.10.6.1 ETC6 generation . 56g34.10.6.2 ETC6 power allocation . 56g34.10.7 ETC7: E-UTRA and NB-IoT standalone multi-carrier operation . 56g34.10.7.1 ETC7 generation . 56g34.10.7.2 ETC7 power allocation . 57g34.10.8 ETC8: E-UTRA and NB-IoT in-band multi-car

27、rier operation 57g34.10.8.1 ETC8 generation . 57g34.10.8.2 ETC8 power allocation . 57g34.10.9 ETC9: E-UTRA and NB-IoT guard-band multi-carrier operation 57g34.10.9.1 ETC9 generation . 57g34.10.9.2 ETC9 power allocation . 58g34.11 Applicability of test configurations 58g34.12 Requirements for BS capa

28、ble of multi-band operation 63g34.13 Tests for BS capable of multi-band operation with three or more bands . 64g35 Operating bands and channel arrangement . 64g35.1 General . 64g35.2 Void 64g35.3 Void 64g35.4 Void 64g35.5 Operating bands 64g35.6 Channel bandwidth . 87g35.7 Channel arrangement 91g35.

29、7.1 Channel spacing 91g35.7.1A CA Channel spacing . 91g35.7.2 Channel raster . 92g35.7.3 Carrier frequency and EARFCN . 92g35.8 Requirements for contiguous and non-contiguous spectrum 95g36 Transmitter characteristics . 96g36.1 General . 96g36.1.1 E-UTRA Test Models . 96g36.1.1.1 E-UTRA Test Model 1

30、.1 (E-TM1.1). 96g36.1.1.2 E-UTRA Test Model 1.2 (E-TM1.2). 98g36.1.1.3 E-UTRA Test Model 2 (E-TM2) 100g36.1.1.3a E-UTRA Test Model 2a (E-TM2a) . 102g36.1.1.4 E-UTRA Test Model 3.1 (E-TM3.1). 102g36.1.1.4a E-UTRA Test Model 3.1a (E-TM3.1a) . 103g36.1.1.5 E-UTRA Test Model 3.2 (E-TM3.2). 104g36.1.1.6

31、E-UTRA Test Model 3.3 (E-TM3.3). 107g36.1.2 Data content of Physical channels and Signals for E-TM . 110g36.1.2.1 Reference signals 110g36.1.2.2 Primary Synchronization signal 110g36.1.2.3 Secondary Synchronization signal 110g36.1.2.4 PBCH 110g36.1.2.5 PCFICH. 110g36.1.2.6 PHICH . 111g36.1.2.7 PDCCH

32、 . 111g3ETSI ETSI TS 136 141 V14.6.0 (2018-01)53GPP TS 36.141 version 14.6.0 Release 146.1.2.8 PDSCH 111g36.1.3 NB-IoT Test Model 112g36.1.4 Data content of Physical channels and Signals for N-TM 112g36.1.4.1 Reference signals 113g36.1.4.2 Synchronization signals 113g36.1.4.3 NPBCH . 113g36.1.4.4 NP

33、DCCH 113g36.1.4.5 NPDSCH. 113g36.1.5 Test Model for NB-IoT guard band operation 113g36.1.6 Test Model for NB-IoT in-band operation 114g36.2 Base station output power 114g36.2.1 Definition and applicability 114g36.2.2 Minimum Requirement . 115g36.2.3 Test purpose 115g36.2.4 Method of test . 115g36.2.

34、4.1 Initial conditions . 115g36.2.4.2 Procedure 116g36.2.5 Test Requirements 116g36.2.6 Home BS output power for adjacent UTRA channel protection. 117g36.2.6.1 Definition and applicability . 117g36.2.6.2 Minimum Requirement . 117g36.2.6.3 Test purpose 117g36.2.6.4 Method of test . 118g36.2.6.4.1 Ini

35、tial conditions 118g36.2.6.4.2 Procedure . 118g36.2.6.5 Test Requirements . 118g36.2.7 Home BS output power for adjacent E-UTRA channel protection . 119g36.2.7.1 Definition and applicability . 119g36.2.7.2 Minimum Requirement . 120g36.2.7.3 Test purpose 120g36.2.7.4 Method of test . 120g36.2.7.4.1 I

36、nitial conditions 120g36.2.7.4.2 Procedure . 120g36.2.7.5 Test Requirements . 121g36.2.8 Home BS output power for co-channel E-UTRA protection 121g36.2.8.1 Definition and applicability . 121g36.2.8.2 Minimum Requirement . 122g36.2.8.3 Test purpose 122g36.2.8.4 Method of test . 122g36.2.8.4.1 Initial

37、 conditions 122g36.2.8.4.2 Procedure . 123g36.2.8.5 Test Requirements . 123g36.3 Output power dynamics 124g36.3.1 RE Power control dynamic range . 124g36.3.1.1 Definition and applicability . 124g36.3.1.2 Minimum Requirement . 124g36.3.1.3 Method of test . 124g36.3.2 Total power dynamic range 124g36.

38、3.2.1 Definition and applicability . 124g36.3.2.2 Minimum Requirement . 124g36.3.2.3 Test purpose 124g36.3.2.4 Method of test . 124g36.3.2.4.1 Initial conditions 124g36.3.2.4.2 Procedure . 125g36.3.2.5 Test Requirement 125g36.3.3 NB-IoT RB power dynamic range for in-band or guard band operation 125g

39、36.3.3.1 Definition and applicability . 125g36.3.2.2 Minimum Requirement . 125g36.3.3.3 Test purpose 126g36.3.3.4 Method of test . 126g36.3.3.5 Test Requirement 126g36.4 Transmit ON/OFF power . 126g3ETSI ETSI TS 136 141 V14.6.0 (2018-01)63GPP TS 36.141 version 14.6.0 Release 146.4.1 Transmitter OFF

40、power 126g36.4.1.1 Definition and applicability . 126g36.4.1.2 Minimum Requirement . 126g36.4.1.3 Test purpose 126g36.4.1.4 Method of test . 126g36.4.1.4.1 Void . 126g36.4.1.4.2 Void . 126g36.4.1.5 Test requirement . 126g36.4.2 Transmitter transient period 127g36.4.2.1 Definition and applicability .

41、 127g36.4.2.2 Minimum Requirement . 127g36.4.2.3 Test purpose 127g36.4.2.4 Method of test . 127g36.4.2.4.1 Initial conditions 127g36.4.2.4.2 Procedure . 128g36.4.2.5 Test requirement . 128g36.5 Transmitted signal quality 128g36.5.1 Frequency error . 128g36.5.1.1 Definition and applicability . 128g36

42、.5.1.2 Minimum Requirement . 128g36.5.1.3 Test purpose 128g36.5.1.4 Method of test . 129g36.5.1.5 Test requirement . 129g36.5.2 Error Vector Magnitude 129g36.5.2.1 Definition and applicability . 129g36.5.2.2 Minimum Requirement . 129g36.5.2.3 Test purpose 129g36.5.2.4 Method of test . 129g36.5.2.4.1

43、 Initial conditions 129g36.5.2.4.2 Procedure . 129g36.5.2.5 Test requirement . 130g36.5.3 Time alignment error 131g36.5.3.1 Definition and applicability . 131g36.5.3.2 Minimum Requirement . 131g36.5.3.3 Test Purpose 131g36.5.3.4 Method of Test 131g36.5.3.4.1 Initial Conditions . 131g36.5.3.4.2 Proce

44、dure . 132g36.5.3.5 Test Requirement 132g36.5.4 DL RS power 133g36.5.4.1 Definition and applicability . 133g36.5.4.2 Minimum Requirement . 133g36.5.4.3 Test purpose 133g36.5.4.4 Method of test . 133g36.5.4.4.1 Initial conditions 133g36.5.4.4.2 Procedure . 133g36.5.4.5 Test requirement . 133g36.6 Unw

45、anted emissions . 134g36.6.1 Occupied bandwidth . 134g36.6.1.1 Definition and applicability . 134g36.6.1.2 Minimum Requirements 134g36.6.1.3 Test purpose 134g36.6.1.4 Method of test . 134g36.6.1.4.1 Initial conditions 134g36.6.1.4.2 Procedure . 135g36.6.1.5 Test requirements 136g36.6.2 Adjacent Chan

46、nel Leakage power Ratio (ACLR) 136g36.6.2.1 Definition and applicability . 136g36.6.2.2 Minimum Requirement . 136g36.6.2.3 Test purpose 137g36.6.2.4 Method of test . 137g36.6.2.4.1 Initial conditions 137g3ETSI ETSI TS 136 141 V14.6.0 (2018-01)73GPP TS 36.141 version 14.6.0 Release 146.6.2.4.2 Proced

47、ure . 137g36.6.2.5 Test Requirement 138g36.6.2.6 Cumulative ACLR test requirement in non-contiguous spectrum 140g36.6.3 Operating band unwanted emissions 142g36.6.3.1 Definition and applicability . 142g36.6.3.2 Minimum Requirement . 143g36.6.3.3 Test purpose 143g36.6.3.4 Method of test . 143g36.6.3.

48、4.1 Initial conditions 143g36.6.3.4.2 Procedure . 143g36.6.3.5 Test requirement . 144g36.6.3.5.1 Test requirements for Wide Area BS (Category A). 145g36.6.3.5.2 Test requirements for Wide Area BS (Category B) . 149g36.6.3.5.2.1 Category B test requirements (Option 1) . 149g36.6.3.5.2.2 Category B (O

49、ption 2) . 153g36.6.3.5.2A Test requirements for Local Area BS (Category A and B) 155g36.6.3.5.2B Test requirements for Home BS (Category A and B) 158g36.6.3.5.2C Test requirements for Medium Range BS (Category A and B) . 159g36.6.3.5.2D Minimum requirements for Local Area and Medium Range BS in Band 46 (Category A and B) . 164g36.6.3.5.2E Minimum requirements for stand-alone NB-IoT Wide Area BS . 165g36.6.3.5.3 Additional requirements 166g36.6.4 Transmitter spurious emissions . 169g36.6.4.1 Definition and applicability . 169g36.6.4.2 Minimum Requirements 170g36.6.4.3 Test