ETSI TS 102 362-2-2007 Electromagnetic compatibility and Radio spectrum Matters (ERM) Conformance testing for the Digital Mobile Radio (DMR) Part 2 Test Suite Structure and Test Pu.pdf

《ETSI TS 102 362-2-2007 Electromagnetic compatibility and Radio spectrum Matters (ERM) Conformance testing for the Digital Mobile Radio (DMR) Part 2 Test Suite Structure and Test Pu.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 102 362-2-2007 Electromagnetic compatibility and Radio spectrum Matters (ERM) Conformance testing for the Digital Mobile Radio (DMR) Part 2 Test Suite Structure and Test Pu.pdf（69页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 102 362-2 V1.3.1 (2007-06)Technical Specification Electromagnetic compatibilityand Radio spectrum Matters (ERM);Conformance testing for the Digital Mobile Radio (DMR);Part 2: Test Suite Structure andTest Purposes (TSS Essential, or potentially Essential, IPRs notified to ETSI in respect of

2、ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existe

3、nce of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectru

4、m Matters (ERM). The present document is part 2 of a multi-part deliverable covering the Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Digital Mobile Radio (DMR), as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS) proforma

5、“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS)“. ETSI ETSI TS 102 362-2 V1.3.1 (2007-06) 8 1 Scope The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the ERM DMR Call Control Layer (CCL) and Data Link Layer (DLL). T

6、he objective of the present document is to provide a basis for conformance tests for DMR equipment giving a high probability of air interface inter-operability between different manufacturers DMR equipment. The ISO standard for the methodology of conformance testing, ISO/IEC 9646-1 7, the ETSI rules

7、 for conformance testing, ETS 300 406 6, are used as a basis for the test methodology. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/o

8、r edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.o

9、rg/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 1 ETSI TS 102 361-1 (V.1.4.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Digital Mobile Radio (DMR) Systems; Part 1: DMR Air I

10、nterface (AI) protocol“. 2 ETSI TS 102 361-2 (V.1.2.3): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Digital Mobile Radio (DMR) Systems; Part 2: DMR voice and generic services and facilities“. 3 ETSI TS 102 361-3 (V.1.1.3): “ Electromagnetic compatibility and Radio spectrum Matte

11、rs (ERM); Digital Mobile Radio (DMR) Systems; Part 3: DMR data protocol“. 4 ETSI TS 102 361-4 (V.1.2.1): “ Electromagnetic compatibility and Radio spectrum Matters (ERM); Digital Mobile Radio (DMR) Systems; Part 4: DMR trunking protocol“. 5 ETSI TS 102 362-1: “Electromagnetic compatibility and Radio

12、 spectrum Matters (ERM); Conformance testing for the Digital Mobile Radio (DMR); Part 1: Protocol Implementation Conformance Statement (PICS) proforma“. 6 ETSI ETS 300 406: “Methods for Testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodol

13、ogy“. 7 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. (See also ITU-T Recommendation X.290 (1991). 8 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing meth

14、odology and framework - Part 7: Implementation Conformance Statements“. ETSI ETSI TS 102 362-2 V1.3.1 (2007-06) 9 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ISO/IEC 9646-7 8, TS 102 361-1 1, TS 102 361-2 2, TS 102 361-

15、3 3 and TS 102 361-4 4 apply. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ISO/IEC 9646-1 7, ISO/IEC 9646-7 8, TS 102 361-1 1, TS 102 361-2 2, TS 102 361-3 3, TS 102 361-4 4 and the following apply: AC All Call BC Broadcast Call BDA BS Downlink Activation BS

16、 Base StationNOTE: A reference designating a fixed end device. AUTHC AUTHentication Check BV Valid Behaviour CA Channel Access CACH Common Announcement CHannel CC Colour Code CCL Call Control Layer CD Call Diversion CG Channel Grant CHT Call HangTime CR CSBK Repeating CRC Cyclic Redundancy Checksum

17、(for data error detection) CSBK Control Signalling BlocK DEP Disabling/Enabling a users PTT DHT Date Hang Time DLL Data Link Layer DM Direct ModeDMR Digital Mobile Radio EMB EMBedded signalling FEC Forward Error Correction FNS Feature Not Supported GC Group Call IC Individual Call IMC Illegal MS Che

18、ckIPCA IP Connection Advice IPDC Individual Packet Data Call ISDM Individual Short Data Message IUT Implementation Under Test IVC Individual Voice Call MKI MS KIll MRC MS Radio Check MS Mobile StationNOTE: A reference designating a mobile or portable radio. OACSU Off Air Call SetUp OVCM Open Voice C

19、hannel Mode PDU Protocol Data Unit PICS Protocol Implementation Conformance Statement PS Power Save RA Random AccessREG REGistration ETSI ETSI TS 102 362-2 V1.3.1 (2007-06) 10RM Repeater Mode SDCPD Short Data Confirmed Packet Data SDP Short Data Polling SDUDP Short Data Unconfirmed Packet Data SDRPD

20、 Short Data Response Packet Data ST Slot Type SYNC SYNChronization TACT TDMA Access Channel Type TI TImer TP Test Purposes TPDC Talkgroup Packet Data Call TSCC Trunk System Control Channel TSDM Talkgroup Short Data Message TSPC Trunk System Payload Channel TSS Test Suite Structure TT Traffic Timing

21、TVC Talkgroup Voice Call UC Unaddressed voice Call VCR Voice Call Repeating 4 Test Suite Structure (TSS) 4.1 TSS overview Figure 1 shows the DMR Test Suite Structure (TSS) including its subgroups defined for the conformance testing. Group Protocol Layer/Chanel Type Service and Facilities Sub-Functio

22、n BS CCL BS Downlink Activation MS Initiating Voice Call Repeating MS Initiating Voice Call Hangtime MS Initiating CSBK Repeating MS Initiating BS Downlink Deactivation MS Initiating All Call Voice MS Initiating Broadcast Call Voice MS Initiating TSCC TSCC Acquisition Authorization MS Initiating MS

23、Registration MS Initiating Power Save MS Initiating MS Authentication MS Initiating MS Stun MS_Initiating Individual Voice Call MS Initiating Talkgroup Voice Call MS Initiating Individual Packet Data Call MS Initiating Talkgroup Packet Data Call MS Initiating Individual Short Data Message MS Initiat

24、ing Talkgroup Short Data Message MS Initiating Short Data Polling MS initiating Status Service MS initiating Call Diversion MS initiating MS Kill IP Connection Advice TSPC MS Radio Check MS Terminating Authentication Check MS_Initiating Disable/Enabling users PTT MS_Initiating ETSI ETSI TS 102 362-2

25、 V1.3.1 (2007-06) 11Group Protocol Layer/Chanel Type Service and Facilities Sub-Function Illegal MS Check MS_Initiating Channel Grant MS_Initiating Call Cancel MS_Initiating DLL TACT Synchronization TDMA Access Channel Type Slot Type Traffic Timing Cyclic Redundancy Checksum Unconfirmed Data Packet

26、Confirmed Data Packet Data Call Hangtime MS CCL Generic BS Service MS Initiating Feature Not Supported MS Terminating Group Call MS Initiating S Terminating Individual Call MS Initiating S Terminating Unaddressed Voice Call MS Initiating All Call Voice MS Initiating Broadcast Call Voice MS Initiatin

27、g Open Voice Channel Mode MS Initiating S Terminating Transmit timeout MS Initiating TSCC TSCC Acquisition Authorization MS Initiating Random Access MS Initiating MS Registration MS Initiating MS Authentication MS Initiating MS Stun MS Initiating Individual Voice Call MS Initiating S Terminating Tal

28、kgroup Voice Call MS Initiating Individual Packet Data Call MS Initiating S Terminating Talkgroup Packet Data Call MS Initiating Individual Short Data Message MS Initiating S Terminating Talkgroup Short Data Message MS Initiating Short Data Polling MS Initiating S Terminating Status Call Service MS

29、Initiating S Terminating Call Diversion MS initiating MS Kill IP Connection Advice TSPC MS Radio Check MS Terminating Authentication Check MS_Initiating Disable/Enabling users PTT MS_Initiating ETSI ETSI TS 102 362-2 V1.3.1 (2007-06) 12Group Protocol Layer/Chanel Type Service and Facilities Sub-Func

30、tion Illegal MS Check MS_Initiating Channel Grant MS_Initiating Call Cancel MS_Initiating DLL Synchronization Slot Type Embedded Signalling Channel Access Direct Mode Repeater Mode Cyclic Redundancy Checksum IP Unconfirmed packet data MS_Initiating IP Confirmed packet data tx MS_Initiating MS_Termin

31、ating IP Response data tx MS_Initiating SD Unconfirmed packet data MS_Initiating SD Confirmed packet data MS_Initiating MS_Terminating SD Response data tx MS_Initiating Figure 1: TSS for Digital Mobile Radio The test suite is structured as a tree with the root defined as DMR-BS or DMR-MS, representi

32、ng the two protocol test groups “DMR for BS“ or “DMR for MS“. 4.2 Test groups The test groups are organized in four levels. The first level defines two entity groups, one for BS and one for MS. The second level defines two protocol groups, one for CCL and one for DLL. In the third and fourth layer,

33、the test groups are created differently based on the second layer respectively (refer to clauses 5.1.2 and 5.1.3). 4.2.1 Protocol groups 4.2.1.1 Call Control Layer (CCL) The Call Control Layer (CCL) provides the following services and facilities: generic BS services; feature not supported signalling

34、; individual call; group call; unaddressed voice call service; all call service; broadcast voice call service; open voice channel call service; transmit timeout. ETSI ETSI TS 102 362-2 V1.3.1 (2007-06) 134.2.1.2 Data Link Layer (DLL) Data Link Layer (DLL) provides the following main functions: chann

35、el coding (FEC, CRC); interleaving, de-interleaving and bit ordering; acknowledgement and retry mechanism; media access control and channel management; framing, superframe building and synchronization; burst and parameter definition; link addressing (source and/or destination); interfacing of voice

36、applications (vocoder data) with the physical layer; data bearer services; exchanging signalling and/or user data with the CCL. The present document focuses on the DLL layer signalling and the related PDUs. Framing, interleaving, and corresponding lower level DLL functions are not tested. 4.2.2 Main

37、 test types 4.2.2.1 Valid Behaviour (BV) tests This test group shall verify that the IUT reacts in conformity with the base specifications after receipt or exchange of valid Protocol Data Units (PDUs). Valid PDUs means that the exchange of messages and the content of the exchanged messages are consi

38、dered as valid. 4.2.2.2 Timer (TI) tests This test group shall verify that the IUT reacts in conformity with the present document after expiry of a defined timer or exceeding of a defined time constraint. 4.2.2.3 Cyclic Redundancy Checksum (CRC) tests This test group shall verify that the IUT applie

39、s the required CRC specified for the different PDUs in the present document. ETSI ETSI TS 102 362-2 V1.3.1 (2007-06) 145 CCL Test Purposes (TP) 5.1 Introduction There are a total of 81 test purposes. 5.1.1 TP definition conventions The TPs are defined by the rules shown in table 1. Table 1: TP defin

40、ition rules TP definition item Item description TP Id The TP Id is a unique identifier formed according to the TP naming conventions defined in clause 5.1.2. Reference A pointer to the base specification requirement from which the TP is derived (specification reference, clause and paragraph). Condit

41、ion The IUTs state to which the TP is applied. Test purpose The events that provoke the expected behaviour given the initial condition and the events that are expected from the IUT pursuant to the base specification. 5.1.2 CCL TP naming conventions The identifier of the TP is built according to tabl

42、e 2. Table 2: TP naming convention for CCL Identifier: TP/- = side type BS Base Station MS Mobile Station = stack layer CCL Call Control Layer DLL Data Link Layer = service group BA BS Downlink Activation VCR Voice Call Repeating CHT Voice Call Hangtime CR CSBK Repeating BDA BS Downlink Deactivation

43、 FNS Feature Not Supported IC Individual Call GC Group Call UC Unaddressed Voice Call AC All Call Voice BC Broadcast Call Voice OVCM Open Voice Channel Mode = functional module MS_INI MS Initiating MS_TER MS Terminating x = type of testing BV Valid Behaviour Tests TI Timer and Constraints Tests CRC

44、Checksum calculation Tests = sequential number (000 etc.) EXAMPLE: TP/BS/CCL/BA/MS_INI/BV-000 is the first test purpose for the valid behaviour testing of the MS_INItiated BS activation procedure of the Call Control Layer (CCL) at the BS side. ETSI ETSI TS 102 362-2 V1.3.1 (2007-06) 155.1.3 DLL TP n

45、aming conventions The identifier of the TP is built according to table 3. Table 3: TP naming convention for DLL Identifier: TP/- = side type BS Base Station MS Mobile Station = stack layer CCL Call Control Layer DLL Data Link Layer = service group CA Channel Access SYNC Synchronization ST Slot Type

46、EMB Embedded Signalling TACT TDMA Access Channel Type TT Traffic Timing DHT Data Hang Time IPCPD IP Confirmed Data Packet IPUPD IP Unconfirmed Data Packet IPRPD IP Response Packet Data SDCPD Short Data Confirmed Packet Data SDUPD Short Data Unconfirmed Packet Data SDRPD Short Data Response Packet Da

47、ta = functional module DM Direct Mode(Peer to Peer Mode) RM Repeater Mode x = type of testing BV Valid Behaviour Tests TI Timer Tests CRC Checksum calculation Tests = sequential number (000 etc.) EXAMPLE: TP/MS/DLL/CA/DM/BV-001 is the second test purpose for the valid behaviour testing of the channe

48、l accessing procedure in direct mode of the Data Link layer at the MS side. ETSI ETSI TS 102 362-2 V1.3.1 (2007-06) 165.1.4 TSCC TP naming conventions The identifier of the TP is built according to table 4. Table 4: TP naming convention for TSCC Identifier: TP/- = side type BS Base Station MS Mobile Station = channel type TSCC Trunking System Control Channel TSPC