EN ISO 9902-7-2001 en Textile machinery - Noise test code - Part 7 Dyeing and finishing machinery (Incorporates Amendment A2 2014)《纺织机械 噪声试验规范 第7部分 印染机及精整机 包含修改件A1-2009》.pdf

《EN ISO 9902-7-2001 en Textile machinery - Noise test code - Part 7 Dyeing and finishing machinery (Incorporates Amendment A2 2014)《纺织机械 噪声试验规范 第7部分 印染机及精整机 包含修改件A1-2009》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 9902-7-2001 en Textile machinery - Noise test code - Part 7 Dyeing and finishing machinery (Incorporates Amendment A2 2014)《纺织机械 噪声试验规范 第7部分 印染机及精整机 包含修改件A1-2009》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN ISO9902-7:2001Textile machinery Determination of noise emission Part 7: Dyeing and finishing machinesICS 17.140.20; 59.120.50 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWA1:2009+BS EN ISO 9902-7:2001 +A2:2014Textile machinery Noise test code Part 7: Dy

2、eing and finishing machineryBS EN ISO 9902-7:2001+A2:2014ISBN 978 0 580 80781 7Amendments/corrigenda issued since publicationDate Comments30 June 2009 Implementation of ISO amendment 1:2009 with CEN endorsement A1:200931 July 2014 Implementation of ISO amendment 2:2014 with CEN endorsement A2:2014:

3、Note added to Scope. Annex ZA updated.This British Standard was published under the authority of the Standards Committee on 15 July 2001 The British Standards Institution 2014. Published by BSI Standards Limited 2014National forewordThis British Standard is the UK implementation of EN ISO 9902-7:200

4、1+A2:2014. It is identical to ISO 9902-7:2001, incorporating amendments 1:2009 and 2:2014. It supersedes BS EN ISO 9902-7:2001+A1:2009, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to ISO text carry the n

5、umber of the ISO amendment. For example, text altered by ISO amendment 1 is indicated by .The UK participation in its preparation was entrusted to Technical Committee TCI/33, Textile machinery.A list of organizations represented on this committee can be obtained on request to its secretary.The publi

6、cation does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 9902-7March 2009ICS 17.140.20; 59.12

7、0.01English versionTextile machinery - Noise test code - Part 7: Dyeing andfinishing machinery (ISO 9902-7:2001)Matriel pour lindustrie textile - Code dessai acoustique -Partie 7: Machines de teinture et de finissage (ISO 9902-7:2001)Textilmaschinen - Geruschmessverfahren - Teil 7:Textilveredlungsma

8、schinen (ISO 9902-7:2001)This European Standard was approved by CEN on 15 March 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists an

9、d bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility

10、of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norwa

11、y, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2001 CEN All rights of exploitation in any form and by any means reservedworldwide for C

12、EN national Members.Ref. No. EN ISO 9902-7:2001 E:2001+A1EN ISO 9902-7:2001+A2June 2014ForewordThe textof the International Standard ISO9902-7:2001 has been prepared by Technical Committee ISO/TC72 “Textile machinery and machinery for dry-cleaning and industriallaundering“ in collaboration withTechn

13、ical Committee CEN/TC 214 “Textile machineryand machinery for dry-cleaning and industrial laundry“,the secretariat ofwhich isheld bySNV.This European Standard shall be giventhe status of a national standard, either bypublication of an identicaltext or by endorsement, at the latest by September 2001,

14、 and conflicting national standards shall bewithdrawn at the latest by September 2001.This European Standard has been prepared under a mandate given to CEN by theEuropean Commissionand the European Free Trade Association, and supports essential requirements of EU Directive(s).For relationship with E

15、U Directive(s), see informative Annex ZB, which is an integral part of this standard.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountriesare bound to implement thisEuropean Standard: Austria, Belgium, Czech Republic, Denmark,Finland, Franc

16、e, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,Spain, Sweden, Switzerland and the United Kingdom.Endorsement noticeThe text of the International Standard ISO9902-7:2001 was approved by CEN as a European Standardwithout any modification.NOTE: Normative referenc

17、es to International Standards are listed in annex ZA (normative).Attention is drawn to the possibility that some of the elements of this International Standard may be thesubject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.This first edition of IS

18、O 9902-7, together with ISO 9902-1, ISO 9902-2, ISO 9902-3, ISO 9902-4,ISO 9902-5 and ISO 9902-6, cancels and replaces ISO 9902:1993, which has been technically revised.ISO 9902 consists of the following parts, under the general title Textile machinery - Noise test code:- Part 1: Common requirements

19、- Part 2: Spinning preparatory and spinning machinery- Part 3: Nonwoven machinery- Part 4: Yarn processing, cordage and rope manufacturing machinery- Part 5: Weaving and knitting preparatory machinery- Part 6: Fabric manufacturing machinery- Part7:Dyeing and finishing machineryAnnex ZAofthis part of

20、 ISO 9902 isfor information only.EN ISO 99027:2001+A1:2009(E)iiBS EN ISO 99027:2001+A1:2009BS EN ISO 9902-7:2001+A2:2014EN ISO 9902-7:2001+A2:2014(E)EN ISO 9902-7:2001/A2:2014 (E) 3 Foreword This document (EN ISO 9902-7:2001/A2:2014) has been prepared by Technical Committee ISO/TC 72 “Textile machin

21、ery and accessories“ in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories” the secretariat of which is held by SNV. This Amendment to the European Standard EN ISO 9902-7:2001 shall be given the status of a national standard, either by publication of an identical te

22、xt or by endorsement, at the latest by December 2014, and conflicting national standards shall be withdrawn at the latest by December 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held respo

23、nsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex

24、ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fo

25、rmer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 9902

26、-7:2001/Amd 2:2014 has been approved by CEN as EN ISO 9902-7:2001/A2:2014 without any modification. iii Foreword to amendment A1This document (EN ISO 9902-7:2001/A1:2009) has been prepared by Technical Committee ISO/TC 72“Textile machineryand machinery for dry-cleaning and industrial laundering“ inc

27、ollaboration with Technical Committee CEN/TC 214 “Textile machineryand accessories“, the secretariat of which is held by SNV.This Amendment to the European Standard EN ISO9902-7:2001 shall be given the status of a national standard, either by publication of an identical textor by endorsement, at the

28、 latest bySeptember 2009, and conflicting national standards shall be withdrawn at the latest bySeptember 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any o

29、rall such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s).According to the CEN/CENELEC Internal Regulations, the national standards organizations of

30、the followingcountries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, CzechRepublic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia

31、, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement noticeThe text of ISO 9902-7:2001/Amd 1:2009 has been approved by CEN as a EN ISO 9902-7:2001/A1:2009 without anymodification.BS EN ISO 99027:2001+A1:2009iii Foreword to amendment A1This document (EN ISO 9902-7:2001/A1:2009)

32、has been prepared by Technical Committee ISO/TC 72“Textile machineryand machinery for dry-cleaning and industrial laundering“ incollaboration with Technical Committee CEN/TC 214 “Textile machineryand accessories“, the secretariat of which is held by SNV.This Amendment to the European Standard EN ISO

33、9902-7:2001 shall be given the status of a nationstandard, either by publication of an identical textor by endorsement, at the latest bySeptember 2009, and conflicting national standards shall be withdrawn at the latest bySeptember 2009. Attention is drawn to the possibility that some of the element

34、s of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any orall such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essenti

35、al requirements of EC Directive(s).According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this Europ an Standard: Austria, Belgium, Bulgaria, Cyprus, CzechRepublic, Denmark, Estonia, Finland, France, Germany, Greece, H

36、ungary, Iceland, Ireland, Italy, Latvia,Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement noticeThe text of ISO 9902-7:2001/Amd 1:2009 has been approved by CEN as a EN ISO 9902-7:2001/A1:20

37、09 without anymodification.BS EN ISO 99027:2001+A1:2009BS EN ISO 9902-7:2001+A2:2014EN ISO 9902-7:2001+A2:2014(E)EN ISO 9902-7:2001/A2:2014 (E) 3 Foreword This document (EN ISO 9902-7:2001/A2:2014) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and accessories“ in collaboratio

38、n with Technical Committee CEN/TC 214 “Textile machinery and accessories” the secretariat of which is held by SNV. This Amendment to the European Standard EN ISO 9902-7:2001 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest

39、by December 2014, and conflicting national standards shall be withdrawn at the latest by December 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all su

40、ch patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of thi

41、s document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

42、 France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 9902-7:2001/Amd 2:2014 has been approved

43、 by CEN as EN ISO 9902-7:2001/A2:2014 without any modification. Foreword to amendment A2blankvContents Page1Scope12Normativereferences13Termsand definitions.24 Defining thetest object.25Sound powerleveldetermination26Emission sound pressureleveldetermination.37Installation and mounting conditions98O

44、perating conditions.99Measurement uncertainties910 Information toberecorded.911 Information tobereported912 Declaration and verification of noiseemission values9EN ISO 99027:2001+A1:2009(E)BS EN ISO 99027:2001+A1:2009BS EN ISO 9902-7:2001+A2:2014ISO 9902-7:2001+A2:2014(E)blank1Textile machinery Nois

45、etestcode Part 7:Dyeingandfinishing machinery1ScopeThis partofISO 9902, takentogether with ISO9902-1,specifiesthe mounting, operating and measuringconditionsrequired forthe measurement, declaration andverification of noiseemitted bydyeingand finishing machines.It is applicable to engineering(grade2)

46、and survey (grade 3) methods,inaccordancewith the InternationalStandards to whichitmakes normative reference, andtomachines of different typesusedasdefined in ISO 1506forpreparation,dyeing,printing, coating,fixing wetting anddrying,finishing,making-up of presentation.It is notapplicable to machines

47、forhydro (centrifugal) extraction.2NormativereferencesThefollowing normative documents containprovisionswhich, through referenceinthistext, constitute provisions ofthispartofISO 9902. Fordated references,subsequent amendments to, or revisionsof, anyofthesepublicationsdo notapply. However,parties to

48、agreements based on this partofISO 9902 areencouraged to investigate thepossibility of applyingthe most recent editions of the normative documents indicated below. Forundatedreferences,the latestedition of the normative document referredtoapplies.MembersofISO and IECmaintainregisters of currentlyval

49、id International Standards.ISO1506,Textilemachinery Dyeing,finishingandalliedmachinery Classificationandnomenclature.ISO3744, Acoustics Determination of soundpower levels of noisesources usingsoundpressure Engineeringmethod inanessentiallyfreefieldoverareflectingplane.ISO3746, Acoustics Determination of soundpower levels of noisesources usingsoundpressure Surveymethodusinganenvelopingmeasurementsurfaceoverareflectingplane.ISO3747 , Acoustics Determination of soundpower levels of noisesources usingsoundpressure Comparisonmethodin situ.