EN 61158-3-24-2014 en Industrial communication networks - Fieldbus specifications - Part 3-24 Data-link layer service definition - Type-24 elements.pdf

《EN 61158-3-24-2014 en Industrial communication networks - Fieldbus specifications - Part 3-24 Data-link layer service definition - Type-24 elements.pdf》由会员分享，可在线阅读，更多相关《EN 61158-3-24-2014 en Industrial communication networks - Fieldbus specifications - Part 3-24 Data-link layer service definition - Type-24 elements.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationIndustrial communication networks Fieldbus specificationsPart 3-24: Data-link layer service definition Type-24 elementsBS EN 61158-3-24:2014National forewordThis British Standard is the UK implementation of EN 61158-3-24:2014. It isidentical to IEC 61158-3-24:2014.The UK par

2、ticipation in its preparation was entrusted to Technical Com-mittee AMT/7, Industrial communications: process measurement andcontrol, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all t

3、he necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 79371 4ICS 25.040.40; 35.100.20; 35.240.50Compliance with a British Standard cannot confer immunity fromlegal obligati

4、ons.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61158-3-24:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61158-3-24 October 20

5、14 ICS 25.040.40; 35.100.20; 35.110 English Version Industrial communication networks - Fieldbus specifications - Part 3-24: Data-link layer service definition - Type-24 elements (IEC 61158-3-24:2014) Rseaux de communication industriels - Spcifications des bus de terrain - Partie 3-24: Dfinition des

6、 services de la couche liaison de donnes - lments de type 24 (CEI 61158-3-24:2014) Industrielle Kommunikationsnetze - Feldbusse - Teil 3-24: Dienstfestlegungen des Data Link Layer (Sicherungsschicht) - Typ 24-Elemente (IEC 61158-3-24:2014) This European Standard was approved by CENELEC on 2014-09-17

7、. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtaine

8、d on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to t

9、he CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, H

10、ungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotech

11、nique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61158-3-24:2014 E BS EN 61158-3-24:2014EN 61158-3-24:2014 -

12、 2 - Foreword The text of document 65C/759/FDIS, future edition 1 of IEC 61158-3-24, prepared by SC 65C “Industrial networks“ of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-3-24:2014. The follow

13、ing dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-06-17 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-09-17 Attention

14、 is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and

15、 the European Free Trade Association. Endorsement notice The text of the International Standard IEC 61158-3-24:2014 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IE

16、C 61158-1 NOTE Harmonized as EN 61158-1. IEC 61784-1 NOTE Harmonized as EN 61784-1. IEC 61784-2 NOTE Harmonized as EN 61784-2. BS EN 61158-3-24:2014- 3 - EN 61158-3-24:2014 Annex ZA (normative) Normative references to international publications with their corresponding European publications The foll

17、owing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an

18、International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year ISO/IEC 7498-1

19、 - Information technology - Open Systems Interconnection - Basic Reference Model: The Basic Model - - ISO/IEC 7498-3 - Information technology - Open Systems Interconnection - Basic Reference Model: Naming and addressing - - ISO/IEC 10731 - Information technology - Open Systems Interconnection - Basi

20、c Reference Model - Conventions for the definition of OSI services - - ISO/IEC 19501 2005 Information technology - Open Distributed Processing - Unified Modeling Language (UML) - - BS EN 61158-3-24:2014 2 IEC 61158-3-24:2014 IEC 2014 CONTENTS INTRODUCTION . 6 1 Scope . 7 1.1 General . 7 1.2 Specific

21、ations 7 1.3 Conformance . 7 2 Normative references . 8 3 Terms, definitions, symbols, abbreviations and conventions . 8 3.1 Reference model terms and definitions 8 3.2 Service convention terms and definitions . 9 3.3 Additional Type 24 data-link specific definitions . 9 3.4 Common symbols and abbre

22、viations . 12 3.5 Additional type 24 symbols and abbreviations . 12 3.6 Common conventions 13 3.7 Additional Type 24 conventions . 14 4 Data-link service and concepts . 14 4.1 Overview . 14 4.2 DLS-user services . 15 4.3 Overview of interactions 16 4.4 Detailed specification of services and interact

23、ions . 18 5 DL-management service . 22 5.1 Overview . 22 5.2 Overview of interactions 23 5.3 Detailed specification of services and interactions . 25 Bibliography 37 Figure 1 Sequence of primitive for set data and read data service . 17 Figure 2 Sequence of primitive for send data with acknowledge s

24、ervice . 17 Figure 3 Sequence of primitive for send data with no-acknowledge service 18 Figure 4 Sequence of primitives for event service 18 Figure 5 Sequence of primitives for Reset service 24 Figure 6 Sequence of primitives for Set/get value service 24 Figure 7 Sequence of primitives for Evaluate

25、delay service 24 Figure 8 Sequence of primitives for Start communication service . 25 Figure 9 Sequence of primitives for Event and Clear error status service . 25 Table 1 The list of DLS service primitives and parameters . 16 Table 2 Write data primitives and parameters 18 Table 3 Values of result

26、for write data service 19 Table 4 Read data primitives and parameters 19 Table 5 Values of result for read data service 19 Table 6 SDA primitives and parameters . 20 Table 7 Values of result for SDA service 20 BS EN 61158-3-24:2014IEC 61158-3-24:2014 IEC 2014 3 Table 8 SDN primitives and parameters

27、. 21 Table 9 Values of result for SDN service 21 Table 10 Event primitives and parameters . 22 Table 11 Values of Event_ID for event service . 22 Table 12 The list of DLMS service primitives and parameters 23 Table 13 Set value primitive and parameters . 26 Table 14 The list of parameter Var_ID of S

28、et value request . 26 Table 15 Data type and range of variables . 26 Table 16 List of the values of variable Cyc_sel 27 Table 17 List of the values of variable Tunit . 28 Table 18 Structure example of the each element of variable IO_Map . 28 Table 19 Data type and range of the each element 29 Table

29、20 Values of result for Set value service 29 Table 21 Get value primitive and parameters . 29 Table 22 The list of parameter Var_ID of Get value request 30 Table 23 Data type and range of variables . 30 Table 24 Error factor assign . 31 Table 25 Values of result for Get value service 31 Table 26 Eva

30、luate delay primitive and parameters . 32 Table 27 Values of result for Set value service 32 Table 28 Set communication mode primitives and parameters . 33 Table 29 Range of Tunit . 34 Table 30 Values of result for set communication mode service. 34 Table 31 Start communication service primitives an

31、d parameter 34 Table 32 Values of result for start communication service 34 Table 33 Clear error primitive and parameters . 35 Table 34 Values of result for clear error service . 35 Table 35 DLM error event primitive and parameters . 36 Table 36 Value and definition of Err_Event_ID . 36 BS EN 61158-

32、3-24:2014 6 IEC 61158-3-24:2014 IEC 2014 INTRODUCTION This part of IEC 61158 is one of a series produced to facilitate the interconnection of automation system components. It is related to other standards in the set as defined by the “three-layer” fieldbus reference model described in IEC 61158-1. T

33、hroughout the set of fieldbus standards, the term “service” refers to the abstract capability provided by one layer of the OSI Basic Reference Model to the layer immediately above. Thus, the data-link layer service defined in this standard is a conceptual architectural service, independent of admini

34、strative and implementation divisions. BS EN 61158-3-24:2014IEC 61158-3-24:2014 IEC 2014 7 INDUSTRIAL COMMUNICATION NETWORKS FIELDBUS SPECIFICATIONS Part 3-24: Data-link layer service definition Type-24 elements 1 Scope General 1.1This part of IEC 61158 provides common elements for basic time-critic

35、al messaging communications between devices in an automation environment. The term “time-critical” is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions w

36、ithin the time-window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This standard defines in an abstract way the externally visible service provided by the Type 24 fieldbus data-link layer in terms of a) the primitive actio

37、ns and events of the service; b) the interrelationship between these actions and events, and their valid sequences; c) the parameters associated with each primitive action and event, and the form which they take. The purpose of this standard is to define the services provided to the Type 24 fieldbus

38、 application layer at the boundary between the application and data-link layers of the fieldbus reference model; systems management at the boundary between the data-link layer and systems management of the fieldbus reference model. Specifications 1.2The principal objective of this standard is to spe

39、cify the characteristics of conceptual data-link layer services suitable for time-critical communications, and thus supplement the OSI Basic Reference Model in guiding the development of data-link protocols for time-critical communications. A secondary objective is to provide migration paths from pr

40、eviously-existing industrial communications protocols. This specification may be used as the basis for formal DL-Programming-Interfaces. Nevertheless, it is not a formal programming interface, and any such interface will need to address implementation issues not covered by this specification, includ

41、ing a) the sizes and octet ordering of various multi-octet service parameters, and b) the correlation of paired request and confirm, or indication and response, primitives. Conformance 1.3This standard does not specify individual implementations or products, nor does it constrain the implementations

42、 of data-link entities within industrial automation systems. There is no conformance of equipment to this data-link layer service definition standard. Instead, conformance is achieved through implementation of the corresponding data-link protocol that fulfills the Type 24 data-link layer services de

43、fined in this standard. BS EN 61158-3-24:2014 8 IEC 61158-3-24:2014 IEC 2014 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated r

44、eferences, the latest edition of the referenced document (including any amendments) applies. NOTE All parts of the IEC 61158 series, as well as IEC 61784-1 and IEC 61784-2 are maintained simultaneously. Cross-references to these documents within the text therefore refer to the editions as dated in t

45、his list of normative references. ISO/IEC 7498-1, Information technology Open Systems Interconnection Basic Reference Model: The Basic Model ISO/IEC 7498-3, Information technology Open Systems Interconnection Basic Reference Model: Naming and addressing ISO/IEC 10731, Information technology Open Sys

46、tems Interconnection Basic Reference Model Conventions for the definition of OSI services ISO/IEC 19501:2005, Information technology Open Distributed Processing Unified Modeling Language (UML) Version 1.4.2 3 Terms, definitions, symbols, abbreviations and conventions For the purposes of this documen

47、t, the following terms, definitions, symbols, abbreviations and conventions apply. Reference model terms and definitions 3.1This standard is based in part on the concepts developed in ISO/IEC 7498-1 and ISO/IEC 7498-3 and makes use of the following terms defined therein. acknowledgement ISO/IEC 7498

48、-1 3.1.1correspondent (N)-entities ISO/IEC 7498-1 3.1.2correspondent DL-entities (N=2) correspondent Ph-entities (N=1) DL-address ISO/IEC 7498-3 3.1.3DL-protocol ISO/IEC 7498-1 3.1.4DL-protocol-data-unit ISO/IEC 7498-1 3.1.5DL-service-data-unit ISO/IEC 7498-1 3.1.6DLS-user ISO/IEC 7498-1 3.1.7DLS-us

49、er-data ISO/IEC 7498-1 3.1.8event ISO/IEC 19501 3.1.9layer-management ISO/IEC 7498-1 3.1.10rimitive name ISO/IEC 7498-1 3.1.11reset ISO/IEC 7498-1 3.1.12segmenting ISO/IEC 7498-1 3.1.13BS EN 61158-3-24:2014IEC 61158-3-24:2014 IEC 2014 9 state ISO/IEC 19501 3.1.14state machine ISO/IEC 19501 3.1.15systems-management ISO/IEC 7498-1 3.1.16transition ISO/IEC 19501 3.1.17(N)-e