EN 13501-1-2007 en Fire classification of construction products and building elements - Part 1 Classification using data from reaction to fire tests (Incorporates Amendment A1 2009.pdf

《EN 13501-1-2007 en Fire classification of construction products and building elements - Part 1 Classification using data from reaction to fire tests (Incorporates Amendment A1 2009.pdf》由会员分享，可在线阅读，更多相关《EN 13501-1-2007 en Fire classification of construction products and building elements - Part 1 Classification using data from reaction to fire tests (Incorporates Amendment A1 2009.pdf（56页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 13501-1:2007+A1:2009 Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire testsICS 13.220.50g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g

2、3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58National forewordThis British Standard is the UK implementation of EN 13501-1:2007+A1:2009. It supersedes BS EN 13501-1:2007 which is withdrawn.The start and finish of text introduced or altered by amendment is indic

3、ated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted to Technical Committee FSH/21, Reaction to fire tests.A list of organizations re

4、presented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 13

5、501-1:2007+A1:2009Amendments/corrigenda issued since publicationDate Comments 30 November 2009 Implementation of CEN amendment A1:2009This British Standard waspublished under the authorityof the Standards Policy andStrategy Committeeon 30 April 2007 BSI 2009ISBN 978 0 580 59861 6EUROPEAN STANDARD NO

6、RME EUROPENNE EUROPISCHE NORM EN 13501-1:2007+A1 September 2009 ICS 13.220.50 Supersedes EN 13501-1:2007English Version Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests Classement au feu des produits et lments de const

7、ruction - Partie 1: Classement partir des donnes dessais de raction au feu Klassifizierung von Bauprodukten und Bauarten zu ihrem Brandverhalten - Teil 1: Klassifizierung mit den Ergebnissen aus den Prfungen zum Brandverhalten von Bauprodukten This European Standard was approved by CEN on 27 Novembe

8、r 2006 and includes Amendment 1 approved by CEN on 17 July 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical r

9、eferences concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN mem

10、ber into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

11、 Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 B

12、russels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13501-1:2007+A1:2009: EEN 13501-1:2007+A1:2009 (E) 2 Contents Page Foreword . 5Introduction 61 Scope 72 Normative references . 73 Terms, definitions and symbols 73.1 Term

13、s and definitions . 73.2 Symbols and abbreviations . 124 Classes of reaction to fire performance . 1355.1 General . 135.2 Non-combustibility test (EN ISO 1182) . 135.3 Heat of combustion test (EN ISO 1716) 135.4 Single burning item test (EN 13823) 135.5 Ignitability test (EN ISO 11925-2) . 145.6 Det

14、ermination of the burning behaviour of floorings, using a radiant heat source (EN ISO 9239-1) . 1466.1 General requirements for specimen preparation 146.2 Specific requirements for non-combustibility and heat of combustion testing. 146.3 Specific requirements for the single burning item test, the ig

15、nitability test and the test for the determination of the burning behaviour of floorings, using a radiant heat source 146.47 Number of tests for classification . 158 Testing of construction products, excluding floorings (see Table 1) . 168.1 Class E . 168.2 Classes D, C, B 178.3 Classes A2, A1 178.3

16、.1 Homogenous products . 178.3.2 Non-homogeneous products . 178.3.3 Class A2 products . 178.4 Additional classifications s1, s2, s3 for smoke production . 178.5 Additional classifications d0, d1, d2 for flaming droplets/particles 179 Testing of floorings (see Table 2) 179.1 Class Efl179.2 Classes Df

17、l, Cfl, Bfl. 189.3 Classes A2fl, A1fl189.3.1 Homogeneous products . 189.3.2 Non-homogeneous products . 189.3.3 Class A2flproducts . 189.4 Additional classifications s1, s2 for smoke production . 1810 Testing of linear pipe thermal insulation products (see Table 3) 1810.1 Class EL1810.2 Classes DL, C

18、L, BL1810.3 Classes A2L, A1L1910.3.1 Homogenous products . 19BS EN 13501-1:2007+A1:2009Test methods and field of application rules 13Field of application . 15Principles for testing, specimen preparation and field of application 14EN 13501-1:2007+A1:2009 (E) 3 10.3.2 Non-homogeneous products . 1910.3

19、.3 Class A2Lproducts . 1910.4 Additional classifications s1, s2, s3 for smoke production . 1910.5 Additional classifications d0, d1, d2 for flaming droplets/particles 1911 Classification criteria for construction products, excluding floorings (see Table 1) 1911.1 General . 1911.2 Class F 2011.3 Clas

20、s E . 2011.4 Class D . 2011.5 Class C . 2011.6 Class B . 2111.7 Class A2 . 2111.7.1 General . 2111.7.2 Homogeneous products . 2111.7.3 Non-homogeneous products . 2111.8 Class A1 . 2211.8.1 Homogeneous products . 2211.8.2 Non-homogeneous products . 2211.9 Additional classifications s1, s2, s3 for smo

21、ke production . 2411.9.1 General . 2411.9.2 s1 2411.9.3 s2 2411.9.4 s3 2411.10 Additional classifications d0, d1, d2 for flaming droplets and/or particles 2411.10.1Products classified A2, B, C, D 2411.10.2Products classified E 2412 Classification criteria for floorings (see Table 2) 2512.1 General .

22、 2512.2 Class Ffl2512.3 Class Efl2512.4 Class Dfl2512.5 Class Cfl2612.6 Class Bfl2612.7 Class A2fl2612.7.1 General . 2612.7.2 Homogeneous products . 2612.7.3 Non-homogeneous products . 2712.8 Class A1fl2712.8.1 Homogeneous products . 2712.8.2 Non-homogeneous products . 2812.9 Additional classificati

23、ons s1, s2 for smoke production . 2812.9.1 General . 2812.9.2 s1 2812.9.3 s2 2813 Classification criteria for linear pipe thermal insulation products (see Table 3) . 2913.1 General . 2913.2 Class FL2913.3 Class EL2913.4 Class DL2913.5 Class CL3013.6 Class BL3013.7 Class A2L3013.7.1 General . 3013.7.

24、2 Homogeneous products . 3013.7.3 Non-homogeneous products . 3113.8 Class A1L3213.8.1 Homogeneous products . 3213.8.2 Non-homogeneous products . 32BS EN 13501-1:2007+A1:2009EN 13501-1:2007+A1:2009 (E) 4 13.9 Additional classifications s1, s2, s3 for smoke production . 3313.9.1 General . 3313.9.2 s1

25、3313.9.3 s2 3313.9.4 s3 3313.10 Additional classifications d0, d1, d2 for flaming droplets and/or particles 3313.10.1Products classified A2L, BL, CL, DL3313.10.2Products classified EL3414 Presentation of classification 3414.1 Construction products, excluding floorings and linear pipe thermal insulat

26、ion products . 3414.2 Floorings 3514.3 Linear pipe thermal insulation products 3515 Field of application of the classification . 3616 Classification report . 3616.1 General . 3616.2 Content and format . 36Annex A (informative) Background information for the application of the Commission Decision of

27、8 February 2000 implementing Council Directive 89/106/EEC as regards the classification of the reaction to fire performance of construction products . 41A.1 General . 41A.2 Assumptions . 41A.3 Reference fire situations 42A.4 Relationship between classes and reference fire situations . 44Annex B (nor

28、mative) Reaction to fire classification report 48Bibliography . 53BS EN 13501-1:2007+A1:2009EN 13501-1:2007+A1:2009 (E) 5 Foreword This document (EN 13501-1:2007+A1:2009) has been prepared by Technical Committee CEN/TC 127 “Fire safety in buildings”, the secretariat of which is held by BSI. This Eur

29、opean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at the latest by March 2010. Attention is drawn to the possibility that some of the elemen

30、ts of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2009-07-17. This document supersedes EN 13501-1:2007The start and finish of text introduced

31、or altered by amendment is indicated in the text by tags!“XIn addition to editorial corrections this document includes the reaction to fire classification procedure for linear pipe thermal insulation products. Amendment 1 provides for the use of extended application reports in the classification pro

32、cedure.CEN, CENELEC and EOTA committees preparing technical specifications, which contain performance requirements against reaction to fire tests, should make reference to the reaction to fire classification given in this European Standard and not refer directly to any specific fire test method. EN

33、13501 Fire classification of construction products and building elements consists of the following parts: Part 1: Classification using data from reaction to fire tests Part 2: Classification using data from fire resistance tests, excluding ventilation services Part 3: Classification using data from

34、fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers Part 4: Classification using data from fire resistance tests on components of smoke control systems Part 5: Classification using data from external fire exposure to roofs test

35、s According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy

36、, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 13501-1:2007+A1:2009. EN 13501-1:2007+A1:2009 (E) 6 Introduction The aim of this European Standard is to define a harmonized procedure for

37、the classification of reaction to fire of construction products. This classification is based on the test procedures listed in Clause 5 and the relevant field of application procedures. This European Standard has been prepared in support of the second essential requirement in the EC Construction Pro

38、ducts Directive (89/106/EEC) and as detailed in the Interpretative Document Number 2: Safety in case of fire (OJ C62 Vol. 37). Background information on the Commission Decision regarding the classification of the reaction to fire performance of construction products is given in Annex A. The European

39、 Commission has drawn up a list of products which, under specified conditions, can be considered to be class A1 without testing. This information is given in the Commission Decision 96/603/EC (OJ L 267 19.10.1966 p23) as amended by 2000/605/EC (OJ L 258 12.10.2000 p36) and 2003/424/EC (OJ L 144 12.6

40、.2003 p9). Additionally there is a procedure by which certain products can be assigned a particular fire classification without the need for testing. Such products have well established reaction to fire performance and have been agreed by the Standing Committee on Construction. Agreements relating t

41、o such products which may be classified without further testing (CWFT) are published in the Official Journal of the EC and are listed on the Nando-CPD database on the EC website ( http:/europa.eu.int/comm/enterprise/construction ). Parts 2, 3 and 4 of this European Standard are concerned with classi

42、fication resulting from fire resistance tests. Part 5 covers classification resulting from tests for external fire exposure to roofs. NOTE 1 If the classification based on the tests and criteria given in Tables 1 and 2 is not appropriate, and or more reference scenarios (representative scale tests t

43、ypifying agreed hazard scenarios) can be called upon within the context of a defined procedure. This procedure is intended to be the subject of a future European Standard or Commission Decision, on the basis of an agreement between the Commission and the Member States, in consultation with CEN/CENEL

44、EC and EOTA. NOTE 2 Test reports constitute the basis for extended application reports as explained in prEN 15725. BS EN 13501-1:2007+A1:2009EN 13501-1:2007+A1:2009 (E) 7 1 Scope This European Standard provides the reaction to fire classification procedure for all construction products, including pr

45、oducts incorporated within building elements. Products are considered in relation to their end use application. This document applies to three categories, which are treated separately in this European Standard: construction products, excluding floorings and linear pipe thermal insulation products; f

46、loorings; linear pipe thermal insulation products. NOTE The treatment of some families of products is still under review and can necessitate amendments to this European Standard (see European Commission Decision 2000/147/EC). 2 Normative references The following referenced documents are indispensabl

47、e for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13823, Reaction to fire tests for building products Building products excluding floorings exposed

48、 to the thermal attack by a single burning item !prEN 15725, Extended application reports on the fire performance of construction products and building elements CEN/TS 15117, Guidance on direct and extended application“ EN ISO 1182, Reaction to fire tests for building products Non-combustibility test (ISO 1182:2002) EN ISO 1716, Reaction to fire tests for building produ