DLA MS27496 REV H-2012 CONNECTORS RECEPTACLE ELECTRICAL BOX MOUNTING CRIMP TYPE BAYONET COUPLING SERIES I.pdf

《DLA MS27496 REV H-2012 CONNECTORS RECEPTACLE ELECTRICAL BOX MOUNTING CRIMP TYPE BAYONET COUPLING SERIES I.pdf》由会员分享，可在线阅读，更多相关《DLA MS27496 REV H-2012 CONNECTORS RECEPTACLE ELECTRICAL BOX MOUNTING CRIMP TYPE BAYONET COUPLING SERIES I.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、 MS27496H 2 February 2012 SUPERSEDING MS27496G 12 July 2002 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, BOX MOUNTING, CRIMP TYPE, BAYONET COUPLING, SERIES I This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for ac

2、quiring the product described herein shall consist of this specification sheet and MIL-DTL-38999. FIGURE 1. Receptacle, class E. AMSC N/A FSC 5935 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27496H 2 FIGURE 1. Receptacle, class E - C

3、ontinued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27496H 3 Shell size K +.015 -.000 L max M +.000 -.005 P dia +.010 -.005 R BSC S .020 X max dia 9 .3595 .938 .469 11 .406 1.031 .594 13 .085 .632 .453 1.125 .719 15 .128 .4845 1.219 .844 17 .

4、312 .531 1.312 .969 19 .578 1.438 1.078 21 .625 1.562 1.203 23 .115 .602 .147 .6875 1.688 1.328 25 .750 1.812 1.453 Inches mm Inches mm Inches mm Inches mm .005 0.13 .3595 9.13 .625 15.88 1.125 27.58 .007 0.18 .406 10.31 .632 16.05 1.203 30.56 .010 0.25 .453 11.51 .6875 17.46 1.219 30.96 .015 0.38 .

5、469 11.91 .719 18.26 1.312 33.32 .020 0.51 .4845 12.31 .750 19.05 1.328 33.73 .085 2.16 .531 13.49 .844 21.44 1.438 36.53 .115 2.29 .560 14.22 .938 23.83 1.453 36.91 .128 3.25 .578 14.68 .969 24.61 1.562 39.67 .147 3.73 .594 15.09 1.031 26.19 1.688 42.88 .266 6.76 .602 15.29 1.078 26.38 1.812 46.02

6、.312 7.92 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. For main keyway and keyway positions, see MIL-DTL-38999. 4. The gauge features for GG shall be .010 (0.25 mm) smaller than the MMC size at basic location. FIGURE 1. Receptacle, class E - Continued.

7、 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27496H 4 REQUIREMENTS: Dimensions and configuration: See figure 1. Interface dimensions shall be in accordance with MIL-DTL-38999. Mating connectors: MS27467, MS27661 and MS27653. Insert arrangements

8、: See MIL-STD-1560. Part or Identifying Number (PIN) example: MS27496 E 15 F 18 P A MS number Class Shell size Finish Insert arrangement Contact style Polarizing positions No letter is required for normal. Changes from previous issue. Marginal notations are not used in this revision to identify chan

9、ges with respect to the previous issue, due to the extent of the changes. Referenced documents. In addition to MIL-DTL-38999, this document references the following: MIL-STD-1560 MS27467 MS27661 MS27653 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - AS Air Force 85 (Pr

10、oject 59352012-022) DLA - CC Review activities: Army - AR, MI Navy - EC, MC, OS Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-