DLA MS27467 REV M-2012 CONNECTORS PLUG ELECTRICAL STRAIGHT CRIMP TYPE BAYONET COUPLING SERIES I.pdf

《DLA MS27467 REV M-2012 CONNECTORS PLUG ELECTRICAL STRAIGHT CRIMP TYPE BAYONET COUPLING SERIES I.pdf》由会员分享，可在线阅读，更多相关《DLA MS27467 REV M-2012 CONNECTORS PLUG ELECTRICAL STRAIGHT CRIMP TYPE BAYONET COUPLING SERIES I.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、MS27467M 2 February 2012 SUPERSEDING MS27467L 12 July 2002 DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, CRIMP TYPE, BAYONET COUPLING, SERIES I This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the

2、 product described herein shall consist of this specification sheet and MIL-DTL-38999. Style S Style P FIGURE 1. Plug, classes E, T and P. AMSC N/A FSC 5935 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27467M 2 Shell size L max DD dia

3、 max Class E Class P Class T (to the end of the serrations) 9 1.234 1.671 1.234 .859 11 .984 13 1.156 15 1.281 17 1.406 19 1.516 21 1.766 1.641 23 1.766 25 1.891 Inches mm Inches mm .391 9.93 1.406 35.71 .859 21.82 1.516 38.51 .984 24.99 1.641 41.68 1.156 29.36 1.671 42.44 1.234 31.34 1.766 43.86 1.

4、281 32.54 1.891 48.03 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. For main key positions, see MIL-DTL-38999. 4. Dimensioning and tolerances are in accordance with ASME Y14.5. FIGURE 1. Plug, classes E, T and P - Continued. Provided by IHSNot for Resal

5、eNo reproduction or networking permitted without license from IHS-,-,-MS27467M 3 REQUIREMENTS: Dimensions and configuration: See figure 1. Interface dimensions shall be in accordance with MIL-DTL-38999. Mating connectors: MS27466, MS27468, MS27469, MS27470, MS27471, MS27496, MS27505, MS27515, MS2765

6、2, MS27654, MS27656 and MS27662. Insert arrangements: See MIL-STD-1560. Part or Identifying Number (PIN) example: MS27467 T 25 F 29 P A MS number Class Shell size Finish Insert arrangement Contact style Polarizing positions No letter designator is required for normal. Specification restrictions Clas

7、ses E and P are inactive for new design for the Air Force. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27467M 4 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue

8、, due to the extent of the changes. Referenced documents. In addition to MIL-DTL-38999, this document references the following: MIL-STD-1560 MS27466 MS27468 MS27469 MS27470 MS27471 MS27496 MS27505 MS27515 MS27652 MS27654 MS27656 MS27662 ASME Y14.5 CONCLUDING MATERIAL Custodians: Preparing activity:

9、Army - CR DLA - CC Navy - AS Air Force 85 (Project 59352012-020) DLA - CC Review activities: Army - AR, MI Navy - EC, MC, OS Air Force - 19, 99 DLA IS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-