DLA MIL-DTL-43719 1 B-2009 MARKING MATERIALS AND MARKERS ADHESIVE ELASTOMERIC PIGMENTED LETTERS AND NUMERALS.pdf
《DLA MIL-DTL-43719 1 B-2009 MARKING MATERIALS AND MARKERS ADHESIVE ELASTOMERIC PIGMENTED LETTERS AND NUMERALS.pdf》由会员分享,可在线阅读,更多相关《DLA MIL-DTL-43719 1 B-2009 MARKING MATERIALS AND MARKERS ADHESIVE ELASTOMERIC PIGMENTED LETTERS AND NUMERALS.pdf(5页珍藏版)》请在麦多课文档分享上搜索。
1、AMSC N/A FSC 7690 INCH-POUND MIL-DTL-43719/1B 6 APRIL 2009 SUPERSEDING MIL-M-43719/1A 13 July 1972 DETAIL SPECIFICATION SHEET MARKING MATERIALS AND MARKERS, ADHESIVE, ELASTOMERIC, PIGMENTED: LETTERS AND NUMERALS This specification is approved for use by all Departments and Agencies of the Department
2、 of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-43719. REQUIREMENTS: Materials. Letters and numerals shall be made from marking material, liner, and when specified in the contract or order (see 6.2 of the general specific
3、ation), translucent transfer sheet, all conforming to requirements specified in MIL-DTL-43719. Construction. Letters and numerals shall be unmounted or mounted, as specified in the contract or order. (Note: In the trade, “unmounted” is also known as “cutout”, and “mounted” as “pre-spaced” and “indiv
4、idually pre-spaced”.) Unmounted. Unmounted letters and numerals shall be cut to shape and shall be made from a layer of elastomeric marking material with a protecting liner on the adhesive side. All edges shall be cut smooth. Unless otherwise specified in the contract or order, the letters and numer
5、als shall be in heights, dimensions, and configurations of Series C Alphabet per Standard Highway Signs (SHS) 2004 Edition. Letters and numerals in other heights shall be identical to Alphabet C in configuration, and the dimensions shall be scaled in direct proportion. When specified in the contract
6、 or order, letters and numerals shall be covered on their face side with translucent transfer sheet, die-cut flush with the edges of the letters and numerals. Mounted. Unless otherwise specified in the contract or order (see ordering data), mounted letters and numerals shall consist of letters and n
7、umerals cut from elastomeric marking material in the heights, dimensions and configuration C Standard Alphabet, with each letter mounted on a rectangular liner and covered on its face side with a matching rectangular, translucent transfer sheet. All edges shall be cut smooth. The liner shall not be
8、cut completely through at the outline of letters and numerals, nor shall it be cut so deep as to interfere with it ready removal from the marker or to result in distortion of the marker when removal is attempted. Notches, punch holes, slits, or other cuts in the rectangles will be permissible, provi
9、ded the quantity and type are limited so that the resulting mounts are compatible in use with solid rectangular mounts. This allows no protuberances beyond the specified rectangular dimensions. For Series C standard Alphabet, the rectangles shall be in the size shown in table I. The letter and numbe
10、r characters shall be centrally located in the rectangles. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-43719/1B 2Table I. Dimensions of rectangular liners and transfer sheets for letters and numerals Height (in.) of letter or numeral 1 1-
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DLAMILDTL437191B2009MARKINGMATERIALSANDMARKERSADHESIVEELASTOMERICPIGMENTEDLETTERSANDNUMERALSPDF

链接地址:http://www.mydoc123.com/p-690782.html