DLA A-A-55447-1995 FLASHLIGHT MANUALLY OPERATED MINI-GENERATOR《装有人工操作袖珍发生器的手电筒》.pdf

《DLA A-A-55447-1995 FLASHLIGHT MANUALLY OPERATED MINI-GENERATOR《装有人工操作袖珍发生器的手电筒》.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-55447-1995 FLASHLIGHT MANUALLY OPERATED MINI-GENERATOR《装有人工操作袖珍发生器的手电筒》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、 A-A-55447 W 74 0367702 956 W A-A-55447 14 JIDE 1995 COMMERCIAL ITEM DESCRIPTION c FLASHLIGHT, MANUALLY OPERATED MINI-GENERATOR The General Services Administration has authorized the use of this Commercial Item Description as a replacement for the type A-9 flashlight of MIL-F-8209B for all federal a

2、gencies. 1. SCOPE. 1.1. Intended use. The flashlight is intended for use on aircraft emergency life rafts and for other emergency applications to provide a small sturdy beam of light where reliance on conventional battery powered light sources are not desirable. This item is not designed for operati

3、on in explosive or potentionally explosive atmospheres. 2.1. Desim and construction. The flashlight shall consist of a manually operated electrical generator which provides power for a Single Contact (SC) Mini Flanged size B-34 incandescent lamp. The lamp shall be positioned within a parabolic refle

4、ctor so as to produce a narrow beam of light. The lamp and reflector shall be covered by a shatterproof lens. The flashlight body shall fit comfortably in the palm of the hand and complete operation shall be possible using only one hand, leaving the operators other hand free to accomplish other task

5、s. Lamp replacement shall not require the use of any tools. 2.1.1 ODerating force. The force required to operate the generator mechanism shall not exceed 3.6 kilograms at the maximum rated output voltage for the flashlight. 2.1.2. Weight. The weight of the flashlight shall not exceed 370 grams. 2.1.

6、3. Dimensions. The flashlight shall fit into a box (rectangular solid) having dimensions not exceeding 150mm X 60mm X 80mm. 2.1.4. Light beam. The flashlight shall project a concentrated beam of light not less than 120mm nor more than 250mm in diameter when located 1.5m from a screen, the plane of w

7、hich is perpendicular to the optical axis of the flashlight. E i 2.1.5. Light intensity. Light emitted shall be not less than 20 candelas, 2 degrees wide or 40 candelas 1 degree wide, in either of two planes perpendicular to each other and passing through the axis of symmetry of the lamp head. Benef

8、icial comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document should be sent to: Defense General Supply Center (DGSC), ATTN: DGSC-VCA, 8000 Jefferson Davis Highway, Richmond, VA 23297-5768. AMSC N/A FSC 6230 DISTRIBUTION STATEMENT A. Approve

9、d for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55447 2.1.6 Rouch handling. The flashlight shall withstand an impact equivalent to a lm free fall onto a vinyl tiled concrete surface without externa

10、l damage or any loss of function associated with the electrical power generating mechanism. 2.2. lmkmm-g hi . All components and assemblies shall be ee of dirt and other extraneous materials. Buns, slivers, rough die, tool, and grinding marks, dents, and cracks shall be unacceptable. Castings, molde

11、d parts and stampings, shall be free of sand, fins, pits, blow holes, and sprues. The surfaces of parts to be welded or brazed shall be clean. All scale and flux shall be removed from the finished weld area. The welds shall be smooth. Threaded fasteners shall not be missing, broken, cracked, or stri

12、pped of threads. There shall be no defects affecting serviceability, durability, operation or appearance. 3. EEGUL ATORY REOU IREMENTS. 3.1. Recovered materials. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum practical extent. Recy

13、cled or reclaimed materials may be used in the construction of the equipment described herein. Recycled and reclaimed materials shall consist of previously used material which has been reprocessed to become a source of new raw materials. Under no conditions or circumstances shall the contractor subm

14、it to the Government for acceptance reconditioned or rebuilt components as a part of the equipment described herein. 4. OUALITY ASSUR ANCE PROVISIONS, 4.1 Contractor certification. The contractor shall certifi and maintain substantiating evidence that the product offered meets the salient characteri

15、stics of this Commercial Item Description, and that the product conforms to the producer?s own drawings, specifications, standards, and quality assurance practices and is the same as the product offered for sale in the commercial marketplace. When specific quality assurance provisions are specified

16、for any commercial characteristic the contractor shall maintain records resulting from his inspection(s) conducted in accordance with the specific quality assurance provisions. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be oth

17、erwise provided under the provisions of the contract. The government reserves the right to audit the contractor?s quality assurance records. 4.2. Successful commercial operation. No item of equipment offered under this CID shall be acceptable unless the manufacturer has marketed equipment of the sam

18、e size (similar capacity) and type in a commercial environment for a minimum period of one year. Equipment installed for test purposes in a manufacturer?s plant or test laboratory shall not be considered as complying with this requirement. 4.3. Warranty. Unless otherwise specified in the contract, t

19、he manufacturer?s standard commercial warranty terms shall apply. 5. PACKAGING. 5.1. Preservation. Packaging, Packing. Labeline and Marking. Preservation, packaging, packing, labeling and marking shall be as specified in the contract or purchase order. 5.1.1. Commercial. In the absence of detailed i

20、nstructions in the contract or purchase order, preservation and packing shall be in accordance with ASTM D 395 1, Standard Practice for Commercial Packaging. Page 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55447 6. NOTES. 6.1. Commercial i

21、tem certification. When this CID is used for procurement, the commercial item certification clause must appear in the solicitation. 6.2. Referenced documents. Copies of referenced documents are available from: Government documents: Standardization Documents Order Desk 700 Robbins Avenue Building 4,

22、Section D Philadelphia, PA 191 11-5094 Non-government documents: ASTM D 395 1 may be obtained from: ASTM 19 16 Race Street Philadelphia, PA 19 103 6.3. US. Customary product. Products manufactured to inch-pound units of measure will be considered on an equal basis with those manufactured using metri

23、c (SI) units of measure, provided they fall within specified tolerances using conversion tables contained in the latest revision of Federal Standard 376, and all other requirements of this CID are met. 6.5. Sources of supply. Equipment described herein can be procured from the following sources: Tek

24、-lite Inc., Union Bridge, MD 2 179 1 Jobar International, Inc., Inglewood, CA 9030 1 - 1 126 Real Goods Inc., Ukiah, CA 95482-5507 Rush Industries Inc., Albertson, NY 11507 6.6. Subject term Ikev word) list. Flashlight, hand generated, no batteries MILITARY INTERESTS: Custodians Air Force - 99 Navy - AS Army - ME Review activities Navy - AS, YD Air Force - 82 Army- ME CIVIL AGENCY COORDINATING ACTIVITY: GSA - FSSIIFXE PREPARING ACTIVITY: DLA - GS (Project 6230-1041) Page 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-