DIN EN 16689-2017 Protective clothing for firefighters - Performance requirements for protective clothing for technical rescue German version EN 16689 2017《消防员防护服 技术救援防护服的性能要求 德文版本.pdf

《DIN EN 16689-2017 Protective clothing for firefighters - Performance requirements for protective clothing for technical rescue German version EN 16689 2017《消防员防护服 技术救援防护服的性能要求 德文版本.pdf》由会员分享，可在线阅读，更多相关《DIN EN 16689-2017 Protective clothing for firefighters - Performance requirements for protective clothing for technical rescue German version EN 16689 2017《消防员防护服 技术救援防护服的性能要求 德文版本.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、June 2017 English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 13.340.10!%g%)“2680206www.din.deDIN

2、 EN 16689Protective clothing for firefighters Performance requirements for protective clothing for technical rescue;English version EN 16689:2017,English translation of DIN EN 16689:2017-06Schutzkleidung fr Feuerwehrleute Leistungsanforderungen fr Schutzkleidung fr die technische Rettung;Englische F

3、assung EN 16689:2017,Englische bersetzung von DIN EN 16689:2017-06Vtements de protection pour les sapeurspompiers Exigences de performances pour les vtements de protection des interventions de secours techniques;Version anglaise EN 16689:2017,Traduction anglaise de DIN EN 16689:2017-06www.beuth.deDo

4、cument comprises 28 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.06.17 DIN EN 16689:2017-06 2 A comma is used as the decimal marker. National foreword This standard includes safety requirements. This document (EN 16689:2017)

5、 has been prepared by Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Persnliche Schutzausrstung (DIN Standards Committee Personal Prote

6、ctive Equipment), Working Committee NA 075-05-02 AA “Protective clothing against heat and fire”. The European Standards referred to in this document have been published as DIN EN or DIN EN ISO Standards with the same number. For the International Standards referred to there are no national standards

7、 available. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16689 April 2017 ICS 13.340.10 English Version Protective clothing for firefighters - Performance requirements for protective clothing for technical rescueVtements de protection pour les sapeurs-pompiers - Exigences de performances pou

8、r les vtements de protection des interventions de secours techniques Schutzkleidung fr Feuerwehrleute - Leistungsanforderungen fr Schutzkleidung fr die technische Rettung This European Standard was approved by CEN on 6 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regu

9、lations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN memb

10、er. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. C

11、EN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

12、 Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploita

13、tion in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16689:2017 E2 Contents Page European foreword . 4 Introduction 5 1 Scope 6 2 Normative references 6 3 Terms and definitions . 7 4 General clothing design . 10 4.1 General . 10 4.2 Size designation 10 4.3 Type

14、of clothing 11 4.4 Interface Areas 11 4.5 Pockets . 11 4.6 Padding 11 4.7 Closures . 11 4.8 Hardware 11 4.9 Collar . 12 4.10 Integrated personal protective equipment 12 5 Sampling and pre-treatment 12 5.1 Sampling 12 5.2 Pre-treatment 12 5.2.1 Cleaning . 12 5.2.2 Ageing . 12 5.2.3 Conditioning . 13

15、6 Thermal requirements . 13 6.1 General . 13 6.2 Limited flame spread 13 6.3 Heat transfer radiation . 14 6.4 Contact heat 14 7 Mechanical and other requirements . 14 7.1 Tensile strength 14 7.2 Tear strength . 14 7.3 Abrasion resistance . 14 7.4 Surface wetting (Optional) . 14 7.5 Electrostatic pro

16、perties (optional) 14 7.6 Dimensional change 14 7.7 Water vapour resistance . 15 7.8 Resistance to Penetration by Blood Borne Pathogens . 15 7.8.1 General . 15 7.8.2 Viral Penetration Resistance . 15 7.9 Visibility. 15 7.10 Burst strength 16 8 Marking 17 9 Information supplied by the manufacturer 17

17、 Annex A (normative) Uncertainty of measurement . 19 EN 16689:2017 (E) DIN EN 16689:2017-06 3 Annex B (normative) Determination of property values 20 Annex C (informative) Guidelines for clothing compatibility 21 Annex D (informative) Checking of basic ergonomic features of protective clothing 22 D.

18、1 General . 22 D.2 Ergonomic assessment questions . 22 D.3 Grounds for concluding that a product is unacceptable . 24 Annex ZA (informative) Relationship between this European Standard and the essential requirements of EU Directive 89/686/EEC aimed to be covered . 25 EN 16689:2017 (E) DIN EN 16689:2

19、017-06 4 European foreword This document (EN 16689:2017) has been prepared by Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, eith

20、er by publication of an identical text or by endorsement, at the latest by October 2017, and conflicting national standards shall be withdrawn at the latest by October 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/

21、or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Di

22、rective(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Repub

23、lic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdo

24、m. EN 16689:2017 (E) DIN EN 16689:2017-06 5 Introduction The purpose of this European Standard is to provide minimum performance requirements for protective clothing for technical rescues. During an incident, hazards other than those against which the clothing to this European Standard is intended t

25、o protect may be encountered e.g. chemical, biological, radiological and electrical. If the risk assessment identifies that exposure to such hazards is likely, protection by more appropriate personal protective equipment may be required, either instead of or in addition to the protective clothing in

26、 this European Standard. For adequate overall protection against the risks to which wearers are likely to be exposed, additional personal protective equipment to protect the head, face, hands and feet should also be worn, along with appropriate respiratory protection where necessary. The specified c

27、ontrolled laboratory tests used to determine compliance with the performance requirements of this European Standard do not replicate the situations to which wearers may be exposed. Nothing in this European Standard is intended to restrict any jurisdiction, purchaser or manufacturer from exceeding th

28、ese minimum requirements. EN 16689:2017 (E) DIN EN 16689:2017-06 6 1 Scope This European Standard specifies the minimum requirements for technical rescue clothing. Technical rescues involves work associated with the environments, and conditions associated with operational scenarios such as but not l

29、imited to those found during road traffic collisions and when working in and around collapsed structures often for extended periods of time after natural disasters (earthquake, landslides, etc.) where protection against mechanical risks, limited heat and flame and conspicuity is needed. NOTE This co

30、uld involve heavy workloads, working in confined spaces and require conspicuity in public places. This European Standard covers the general clothing design, the minimum performance levels of the material used, the methods of test to be used to determine these performance levels, and marking and info

31、rmation supplied by the manufacturer. Unless combined with other specialized PPE and tested accordingly this standard is not applicable to clothing used to protect against risks encountered in fighting fires, wildland fires or rescue from fire, dealing with hazardous chemicals, working with chainsaw

32、s and water and rope rescue. This European Standard does not cover protection for the head, hands and feet or protection against other hazards e.g. chemical, radiological and electrical hazards. These aspects are covered in other European Standards. 2 Normative references The following documents, in

33、 whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1149-5, Protective clothing Ele

34、ctrostatic properties Part 5: Material performance and design requirements EN ISO 1421, Rubber- or plastics-coated fabrics Determination of tensile strength and elongation at break (ISO 1421) EN ISO 4674-1, Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of

35、tear methods (ISO 4674-1) EN ISO 4920, Textile fabrics Determination of resistance to surface wetting (spray test) (ISO 4920) EN ISO 5077, Textiles Determination of dimensional change in washing and drying (ISO 5077) EN ISO 6942, Protective clothing Protection against heat and fire Method of test: E

36、valuation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942) EN ISO 11092, Textiles Physiological effects Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) (ISO 11092) EN ISO 12127-1, Clothing for p

37、rotection against heat and flame Determination of contact heat transmission through protective clothing or constituent materials Part 1: Contact heat produced by heating cylinder (ISO 12127-1) EN ISO 12947-2, Textiles Determination of the abrasion resistance of fabrics by the Martindale method Part

38、2: Determination of specimen breakdown (ISO 12947-2) EN 16689:2017 (E) DIN EN 16689:2017-06 7 EN ISO 13688, Protective clothing General requirements (ISO 13688) EN ISO 13934-1, Textiles Tensile properties of fabrics Part 1: Determination of maximum force and elongation at maximum force using the str

39、ip method (ISO 13934-1) EN ISO 13935-2, Textiles Seam tensile properties of fabrics and made-up textile articles Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2) EN ISO 13937-2, Textiles Tear properties of fabrics Part 2: Determination of tear force of trous

40、er-shaped test specimens (Single tear method) (ISO 13937-2) EN ISO 13938-1, Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1) EN ISO 13938-2, Textiles Bursting properties of fabrics Part 2: Pneumatic method f

41、or determination of bursting strength and bursting distension (ISO 13938-2) EN ISO 14116:2015, Protective clothing Protection against flame Limited flame spread materials, material assemblies and clothing (ISO 14116:2015) EN ISO 15025, Protective clothing Protection against flame Method of test for

42、limited flame spread (ISO 15025) EN ISO 20471:2013, High visibility clothing Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01) ISO 16604, Clothing for protection against contact with blood and body fluids Determination of resistance of protective clothing materials to pene

43、tration by blood-borne pathogens Test method using Phi-X 174 bacteriophage ISO 17493, Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven 3 Terms and definitions For the purposes of this document, the following terms and defi

44、nitions apply. EN 16689:2017 (E) DIN EN 16689:2017-06 8 3.1 ageing changing of the product performance over time during use or storage, caused by a combination of several factors, such as: cleaning, maintenance or disinfecting processes: exposure to visible and/or ultraviolet radiation; exposure to

45、high or low temperatures or to changing temperatures; exposure to chemicals including humidity; exposure to biological agents such as bacteria, fungi, insects or other pests; exposure to mechanical action such as abrasion, flexing, pressure and strain; exposure to contaminants such as dirt, oil, spl

46、ashes of molten metal, etc.; exposure to wear and tear 3.2 anti-wicking barrier material used to prevent the transfer of liquid from outside the garment to inside the garment, usually in addition to or replacing part of the moisture barrier at the edge(s) 3.3 clothing assembly series of garments arr

47、anged in the order as worn, which may contain multilayer materials, material combinations or a series of separate garments in single or multiple layers 3.4 cleaning process by which a PPE is made again serviceable and/or hygienically wearable by removing any dirt or contamination Note 1 to entry: A

48、cleaning cycle is typically a washing plus drying or a dry cleaning treatment followed, if required, by ironing or finishing. 3.5 closure system method of fastening openings in the garment including combinations of more than one method of achieving a secure closure Note 1 to entry: This term does no

49、t cover seams. 3.6 component assembly combination of all materials of a multi-layer garment presented exactly as the finished garment construction EN 16689:2017 (E) DIN EN 16689:2017-06 9 3.7 conditioning keeping samples under standard conditions of temperature and relative humidity for a minimum period of time 3.8 emergency responders protective clothing specific garment providing protection against