DIN EN 771-1-2015 Specification for masonry units - Part 1 Clay masonry units German version EN 771-1 2011+A1 2015《砌块产品规范 第1部分 粘土砌块 德文版本EN 771-1-2011+A1-2015》.pdf

《DIN EN 771-1-2015 Specification for masonry units - Part 1 Clay masonry units German version EN 771-1 2011+A1 2015《砌块产品规范 第1部分 粘土砌块 德文版本EN 771-1-2011+A1-2015》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 771-1-2015 Specification for masonry units - Part 1 Clay masonry units German version EN 771-1 2011+A1 2015《砌块产品规范 第1部分 粘土砌块 德文版本EN 771-1-2011+A1-2015》.pdf（59页珍藏版）》请在麦多课文档分享上搜索。

1、November 2015 English price group 22No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.100.25!%G“2365729www.din.deD

2、IN EN 771-1Specification for masonry units Part 1: Clay masonry units;English version EN 771-1:2011+A1:2015,English translation of DIN EN 771-1:2015-11Festlegungen fr Mauersteine Teil 1: Mauerziegel;Englische Fassung EN 771-1:2011+A1:2015,Englische bersetzung von DIN EN 771-1:2015-11Spcifications po

3、ur lments de maonnerie Partie 1: Briques de terre cuite;Version anglaise EN 771-1:2011+A1:2015,Traduction anglaise de DIN EN 771-1:2015-11SupersedesDIN EN 771-1:2011-07See start of applicationwww.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be consi

4、dered authoritative.Document comprises 59 pages 10.15 DIN EN 771-1:2015-11 2 A comma is used as the decimal marker. Start of application It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of

5、 the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 771

6、-1:2011-07, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 771-1:2011+A1:2015) has been prepared by Tec

7、hnical Committee CEN/TC 125 “Masonry” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-06-02 AA Koordinie-rungsausschuss Mauersteine (SpA zu

8、CEN/TC 125/WG 1). Amendments This standard differs from DIN EN 771-1:2011-07 as follows: a) the entire document has been editorially revised; b) Annex ZA has been completely revised. Previous editions DIN 4151: 1941-02 DIN 105: 1922-08, 1936-02, 1941-10, 1952-01, 1957-03, 1969-07 DIN 105-1: 1982-11,

9、 1989-08 DIN V 105-1: 2002-06 DIN 105-2: 1972-01, 1982-11, 1989-08 DIN V 105-2: 2002-06 DIN 105-3: 1974-04, 1975-07, 1984-05 DIN 105-4: 1974-04, 1984-05 DIN 105-5: 1984-05 DIN V 105-6: 2002-06 DIN EN 771-1: 2003-08, 2005-05, 2011-07 ;EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 771-1:2011+A1

10、 August 2015 ICS 91.100.25 Supersedes EN 771-1:2011English Version Specification for masonry units - Part 1: Clay masonry units Spcifications pour lments de maonnerie - Partie 1: Briques de terre cuite Festlegungen fr Mauersteine - Teil 1: Mauerziegel This European Standard was approved by CEN on 3

11、March 2011 and includes Amendment 1 approved by CEN on 11 January 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliograp

12、hical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibili

13、ty of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic o

14、f Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATI

15、ON EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 771-1:2011+A1:2015 EEN 771-1:2011+A1:2015 (E) 2 Contents Page European foreword

16、 .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Materials and manufacture .9 5 Requirements for clay masonry units 10 5.1 General . 10 5.2 !P units: intended to be used in protected masonry“ . 10 5.2.1 Dimensions and tolerances (!P“ units) . 10 5.2.2 Configuration (!P“ units) 13

17、5.2.3 Density (!P“ units) . 14 5.2.4 Compressive strength (!P“ units) 15 5.2.5 Thermal properties (!P“ units) . 16 5.2.6 Durability (!P“ units) . 16 5.2.7 Water absorption (!P“ units) 16 5.2.8 Active soluble salts content (!P“ units) 16 5.2.9 Moisture movement (!P“ units) 16 5.2.10 Reaction to fire

18、(!P“ units) . 17 5.2.11 Water vapour permeability (!P“ units) 17 5.2.12 Bond strength (!P“ units) . 17 5.2.13 Dangerous substances 17 5.3 !U units: intended to be used in unprotected masonry“ 18 5.3.1 Dimensions and tolerances (!U“ units). 18 5.3.2 Configuration (!U“ units) 19 5.3.3 Density (!U“ uni

19、ts) . 20 5.3.4 Compressive strength (!U“ units) . 21 5.3.5 Thermal properties (!U“ units) . 22 5.3.6 Durability (!U“ units) . 22 5.3.7 Water absorption (!U“ units) 22 5.3.8 Initial rate of water absorption (!U“ units) 23 5.3.9 Active soluble salts content (!U“ units) 23 5.3.10 Moisture movement (!U“

20、 units) . 23 5.3.11 Reaction to fire (!U“ units) . 23 5.3.12 Water vapour permeability (!U“ units) 23 5.3.13 Bond strength (!U“ units) . 24 5.3.14 Dangerous substances 24 6 !Description, designation, designation code and classification of clay masonry units“ 24 6.1 Description and designation . 24 6

21、.1.1 !P units“ . 24 6.1.2 !U units“ . 25 6.2 Designation code 26 6.3 Classification . 30 7 Marking 30 8 !Assessment and verification of constancy of performance (AVCP)“ 30 8.1 General . 30 8.2 !Product type determination“ 30 8.3 Factory production control 31 DIN EN 771-1:2015-11 EN 771-1:2011+A1:201

22、5 (E) 3 8.3.1 General . 31 8.3.2 Testing and measuring equipment 32 8.3.3 Production equipment 32 8.3.4 Raw materials 32 8.3.5 Production process . 32 8.3.6 Finished product testing . 32 8.3.7 Statistical techniques 33 8.3.8 Marking and stock control of products . 33 8.3.9 Traceability . 33 8.3.10 N

23、onconforming products . 33 Annex A (normative) !Sampling for product type determination tests and for independent testing of consignments“ 34 A.1 General . 34 A.2 Sampling procedure 34 A.2.1 General . 34 A.2.2 Random sampling . 34 A.2.3 Representative sampling 34 A.2.4 Dividing the sample . 35 A.2.5

24、 Number of units required for testing . 36 Annex B (informative) Additional information 38 B.1 Use of clay masonry units 38 B.2 Durability 39 B.3 Freeze/thaw resistance . 39 B.3.1 General . 39 B.3.2 Masonry subjected to severe exposure 39 B.3.3 Masonry subjected to moderate exposure . 40 B.3.4 Mason

25、ry subjected to passive exposure 40 B.4 Sulfate action on mortars and plasters . 40 B.5 Efflorescence and staining . 41 B.6 General guidance on the appearance of facing clay masonry units . 41 Annex C (informative) Guidelines for test frequencies for designing a FPC system to demonstrate conformity

26、of finished products with the requirements of the standard and the declaration of the manufacturer 42 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation“ 44 ZA.1 Scope and relevant characteristics . 44 ZA.2 Procedure for AVC

27、P of clay masonry units 47 ZA.2.1 System(s) of AVCP 47 ZA.2.2 Declaration of performance (DoP) . 48 ZA.3 CE marking and labelling 54 Bibliography 57 DIN EN 771-1:2015-11 EN 771-1:2011+A1:2015 (E) 4 European foreword This document (EN 771-1:2011+A1:2015) has been prepared by Technical Committee CEN/T

28、C 125 “Masonry”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2016, and conflicting national standards shall be withdrawn at the latest by May

29、2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 771-1:2011“. This document includes Amendment 1 app

30、roved by CEN on 2015-01-11. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. !This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports basic requirements for const

31、ruction works of the EU Construction Products Regulation (Regulation (EU) No 305/2011). For relationship with EU Regulation/Directive(s), see informative Annex ZA, which is an integral part of this document.“ This European Standard also takes into account the general rules for unreinforced and reinf

32、orced masonry in Eurocode 6. EN 771, Specification for masonry units consists of: Part 1: Clay masonry units Part 2: Calcium silicate masonry units Part 3: Aggregate concrete masonry units (Dense and light weight aggregates) Part 4: Autoclaved aerated concrete masonry units Part 5: Manufactured ston

33、e masonry units Part 6: Natural stone masonry units According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland

34、, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 771-1:2015-11 EN 771-1:2011+

35、A1:2015 (E) 5 1 Scope !This European Standard specifies the characteristics and performance requirements for masonry units manufactured from clay for which the main intended uses are protected or unprotected masonry structure (see definitions 3.3 and 3.4) (e.g. facing and rendered masonry, loadbeari

36、ng or non-loadbearing masonry structures, including internal linings and partitions, for building and civil engineering).“ !deleted text“ This European Standard includes those clay masonry units of an overall non-rectangular parallelepiped shape. It defines the performance related to e.g. dimensiona

37、l tolerances, strength, density measured according to the corresponding test methods contained in separate European Standards. !It provides for the assessment and verification of constancy of performance (AVCP) of the product to this European Standard.“ The marking requirement for products covered b

38、y this European Standard is included. This European Standard does not specify standard sizes for clay masonry units, nor does it specify standard work dimensions, angles and radii of specially shaped clay masonry units. !This European Standard does not include method of measurement of angles and rad

39、ii characteristics of specially shaped clay masonry units.“ This European Standard does not cover requirements for the following: units for paving, flue liners and storey height clay masonry units and clay masonry units with an incorporated thermal insulation material bonded to the faces of the unit

40、 susceptible to be exposed to fire. It does, however, include clay masonry units for external chimney masonry. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated reference

41、s, the latest edition of the referenced document (including any amendments) applies. EN 772-1, Methods of test for masonry units Part 1: Determination of compressive strength EN 772-3, Methods of test for masonry units Part 3: Determination of net volume and percentage of voids of clay masonry units

42、 by hydrostatic weighing EN 772-5, Methods of test for masonry units Part 5: Determination of the active soluble salts content of clay masonry units EN 772-7, Methods of test for masonry units Part 7: Determination of water absorption of clay masonry damp proof course units by boiling in water EN 77

43、2-9, Methods of test for masonry units Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling EN 772-11, Methods of test for masonry units Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated c

44、oncrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units EN 772-13, Methods of test for masonry units Part 13: Determination of net and gross dry density of masonry units (except for natural stone) DIN EN 771-1

45、:2015-11 EN 771-1:2011+A1:2015 (E) 6 EN 772-16, Methods of test for masonry units Part 16: Determination of dimensions EN 772-19, Methods of test for masonry units Part 19: Determination of moisture expansion of large horizontally perforated clay masonry units EN 772-20, Methods of test for masonry

46、units Part 20: Determination of flatness of faces of aggregate concrete, manufactured stone and natural stone masonry units EN 772-21, Methods of test for masonry units Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption EN 1052-3, Methods o

47、f test for masonry Part 3: Determination of initial shear strength EN 1745, Masonry and masonry products Methods for determining thermal properties EN 13501-1, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN ISO 1257

48、2, Hygrothermal performance of building materials and products Determination of water vapour transmission properties (ISO 12572:2001) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. NOTE Annex B to this European Standard is informative and gives

49、descriptions of such matters as applications, exposure and durability. 3.1 masonry unit preformed component intended for use in masonry construction 3.2 clay masonry unit masonry unit made from clay or other argillaceous materials with or without sand, fuel or other additives fired at a sufficiently high temperature to achieve a ceramic bond 3.3 protected masonry !masonry which is protected against water penetration and is not in contact wit