DIN EN 12088-2013 Thermal insulating products for building applications - Determination of long term water absorption by diffusion German version EN 12088 2013《建筑物用隔热产品 通过扩散测定长期吸水率.pdf

《DIN EN 12088-2013 Thermal insulating products for building applications - Determination of long term water absorption by diffusion German version EN 12088 2013《建筑物用隔热产品 通过扩散测定长期吸水率.pdf》由会员分享，可在线阅读，更多相关《DIN EN 12088-2013 Thermal insulating products for building applications - Determination of long term water absorption by diffusion German version EN 12088 2013《建筑物用隔热产品 通过扩散测定长期吸水率.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、June 2013 Translation by DIN-Sprachendienst.English price group 7No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91

2、.100.60!%1|“2021489www.din.deDDIN EN 12088Thermal insulating products for building applications Determination of long term water absorption by diffusion;English version EN 12088:2013,English translation of DIN EN 12088:2013-06Wrmedmmstoffe fr das Bauwesen Bestimmung der Wasseraufnahme durch Diffusio

3、n;Englische Fassung EN 12088:2013,Englische bersetzung von DIN EN 12088:2013-06Produits isolants thermiques destins aux applications du btiment Dtermination de labsorption deau long terme Essai par diffusion;Version anglaise EN 12088:2013,Traduction anglaise de DIN EN 12088:2013-06SupersedesDIN EN 1

4、2088:1997-08www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 10 pages 05.13 DIN EN 12088:2013-06 2 A comma is used as the decimal marker. National foreword This document (EN 12088:2013) has been prepared by Technical Committee CEN/TC 88

5、“Thermal insulating materials and products” (Secretariat: DIN, Germany) The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-56-60 AA Wrmedmmstoffe. Amendments This standard differs fro

6、m DIN EN 12088:1997-08 as follows: a) the standard has been editorially revised. Previous editions DIN EN 12088: 1997-08 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12088 March 2013 ICS 91.100.60 Supersedes EN 12088:1997English Version Thermal insulating products for building applications -

7、 Determination of long term water absorption by diffusion Produits isolants thermiques destins aux applications du btiment - Dtermination de labsorption deau long terme - Essai par diffusion Wrmedmmstoffe fr das Bauwesen - Bestimmung der Wasseraufnahme durch Diffusion This European Standard was appr

8、oved by CEN on 15 December 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nation

9、al standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own languag

10、e and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, H

11、ungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Manag

12、ement Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12088:2013: EEN 12088:2013 (E) 2 Contents Page Foreword . 3 1 Scope 5 2 Normative references . 5 3 Terms and definitions 5 4 Princ

13、iple 5 5 Apparatus . 5 6 Test specimens 6 6.1 Dimensions of test specimens 6 6.2 Number of test specimens . 7 6.3 Preparation of test specimens . 7 6.4 Conditioning of test specimens. 7 7 Procedure - Test procedure . 7 8 Calculation and expression of results 7 9 Accuracy of measurement . 8 10 Test r

14、eport 8 DIN EN 12088:2013-06 EN 12088:2013 (E) 3 Foreword This document (EN 12088:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, ei

15、ther by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CE

16、N and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12088:1997. The revision of this standard contains no major changes, only minor corrections and clarifications of an editorial nature. This European Standard is one of a series o

17、f standards which specify test methods for determining dimensions and properties of thermal insulating materials and products. It supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the approximation of l

18、aws, regulations and administrative provisions of the Member States relating to construction products (Directive 89/106/EEC) through the consideration of the essential requirements. This European Standard has been drafted for applications in buildings but it may also be used in other areas where it

19、is relevant. This European test standard is one of the following group of inter-related standards on test methods for determining dimensions and properties of thermal insulation materials and products, all of which fall within the scope of CEN/TC 88: EN 822, Thermal insulating products for building

20、applications Determination of length and width EN 823, Thermal insulating products for building applications Determination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determinatio

21、n of flatness EN 826, Thermal insulating products for building applications Determination of compression behaviour EN 1602, Thermal insulating products for building applications Determination of the apparent density EN 1603, Thermal insulating products for building applications Determination of dime

22、nsional stability under constant normal laboratory conditions (23 C/50 % relative humidity) EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building appl

23、ications Determination of deformation under specified compressive load and temperature conditions EN 1606, Thermal insulating products for building applications Determination of compressive creep DIN EN 12088:2013-06 EN 12088:2013 (E) 4 EN 1607, Thermal insulating products for building applications

24、Determination of tensile strength perpendicular to faces EN 1608, Thermal insulating products for building applications Determination of tensile strength parallel to faces EN 1609, Thermal insulating products for building applications Determination of short-term water absorption by partial immersion

25、 EN 12085, Thermal insulating products for building applications Determination of linear dimensions of test specimens EN 12086, Thermal insulating products for building applications Determination of water vapour transmission properties EN 12087, Thermal insulating products for building applications

26、Determination of long-term water absorption by immersion EN 12088, Thermal insulating products for building applications Determination of long-term water absorption by diffusion EN 12089, Thermal insulating products for building applications Determination of bending behaviour EN 12090, Thermal insul

27、ating products for building applications Determination of shear behaviour EN 12091, Thermal insulating products for building applications Determination of freeze-thaw resistance EN 12429, Thermal insulating products for building applications Conditioning to moisture equilibrium under specified tempe

28、rature and humidity conditions EN 12430, Thermal insulating products for building applications Determination of behaviour under point load EN 12431, Thermal insulating products for building applications Determination of thickness for floating floor insulating products EN 13793, Thermal insulating pr

29、oducts for building applications Determination of behaviour under cyclic loading EN 13820, Thermal insulating materials for building applications Determination of organic content According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bo

30、und to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal

31、ta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 12088:2013-06 EN 12088:2013 (E) 5 1 Scope This European Standard specifies the equipment and procedures for determining the long-term water absorption of test spe

32、cimens by diffusion. It is applicable to thermal insulating products. It is intended to simulate the water absorption of products subjected to high relative humidities, approximating to 100 %, on both sides and subjected to a water vapour pressure gradient for a long period of time e.g. inverted roo

33、f or unprotected ground insulation. The test is not applicable for all types of thermal insulating products. The product standard should state for which of its products, if any, this test is applicable. NOTE For unprotected ground insulation, the temperature of 50 C might be replaced by a lower temp

34、erature, when more data is available. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the re

35、ferenced document (including any amendments) applies. EN 12085, Thermal insulating products for building applications Determination of linear dimensions of test specimens 3 Terms and definitions This European Standard contains no terms and definitions. 4 Principle The long-term water absorption by d

36、iffusion is determined by measuring the increase in the mass of a test specimen subjected to a water vapour pressure difference and temperature gradient for a period of 28 days. 5 Apparatus 5.1 Balance, which allows the determination of the mass of a test specimen to 0,1 g. 5.2 Corrosion resistant c

37、ontainer, with a frame supporting the test specimens. 5.3 Heating device, with a thermostat, which provides water temperature control to (50 1) C. 5.4 Cooling plate, thermally insulated on the outside, operating at a temperature of (1 0,5) C. 5.5 Tap water, adjusted to a temperature of (50 1) C. The

38、 principle of the apparatus assembly is illustrated in Figure 1. DIN EN 12088:2013-06 EN 12088:2013 (E) 6 Dimensions in millimetres Key 1 cooling plate 2 thermal insulation of the cooling plate and the container 3 cooling medium inlet and outlet 4 test specimen 5 corrosion resistant container with a

39、 frame supporting the test specimen 6 tap water 7 heating device with a thermostat 8 sealing Figure 1 Example of test device for water absorption by diffusion 6 Test specimens 6.1 Dimensions of test specimens The thickness of the test specimens shall be the original product thickness. The test speci

40、mens shall be squares with squarely cut edges having sides of (500 1) mm. If the product is not large enough to permit this size of test specimen, the test specimen size shall be reduced accordingly. Test specimens shall contain no joints. DIN EN 12088:2013-06 EN 12088:2013 (E) 7 6.2 Number of test

41、specimens The number of test specimens shall be at least two. 6.3 Preparation of test specimens The test specimens shall be cut so that they do not include original product edges. Test specimens shall be prepared by methods that do not substantially change the original structure of the product. Any

42、facings, skins and/or coatings shall be retained. Special methods of preparation, when needed, are given in the relevant product standard or any other European Technical Specification. 6.4 Conditioning of test specimens The test specimens shall be stored for at least 6 h at (23 5) C. In case of disp

43、ute, they shall be stored at (23 2) C and (50 5) % relative humidity for the time stated in the relevant product standard with a minimum of 6 h. 7 Procedure - Test procedure The dimensions of the test specimens shall be measured in accordance with EN 12085. Weigh the test specimen to the nearest 0,1

44、 g to determine its initial mass, m0. Place the test specimen on the frame of the container. If the product is faced on one side, begin the test with the facing upwards. Seal the bottom edge of the test specimen to the container. The width of the sealing shall be 10 mm (see Figure 1). Place the insu

45、lated cooling plate on the top of the test specimen. Subject the test specimen to a temperature and a water vapour pressure difference for 28 days by maintaining the water at a temperature of (50 1) C and the cooling on the other side at a temperature of (1 0,5) C. Turn the test specimen over every

46、7 days. After 28 days remove the test specimen and wipe off any surface water. Weigh the test specimen again to determine its mass, mD. 8 Calculation and expression of results The test result, Wdpor WdV, shall be the mean value of the individual values. Results shall not be extrapolated to other thi

47、cknesses. Calculate the long term water absorption by diffusion for each test specimen, Wdpor WdV, in kilograms per square metre or volume percent using Formula (1) or (2): Wdp= Am- mp0D(1) WdV= Wp0D100x d x Am- m(2) where m0is the initial mass of the test specimen, in kilograms; DIN EN 12088:2013-0

48、6 EN 12088:2013 (E) 8 mDis the mass of the test specimen after submission to water absorption by diffusion for 28 days, in kilograms; Apis the bottom surface area of the test specimen, in square metres; d is the thickness of the test specimen, in metres; Wis the density of water, assumed to be 1 000 kg/m3. Wdpshall be rounded to the nearest 0,01 kg/m2. WdVshall be rounded to the nearest 0,1 volume perc