DIN 2848-2002 Flanged steel pipes and flanged steel or cast iron fittings with lining - PN 10 PN 25 and PN 40《带衬里的法兰钢管和法兰钢管道或法兰铸铁配件 PN 10、PN 25 和 PN 40》.pdf

《DIN 2848-2002 Flanged steel pipes and flanged steel or cast iron fittings with lining - PN 10 PN 25 and PN 40《带衬里的法兰钢管和法兰钢管道或法兰铸铁配件 PN 10、PN 25 和 PN 40》.pdf》由会员分享，可在线阅读，更多相关《DIN 2848-2002 Flanged steel pipes and flanged steel or cast iron fittings with lining - PN 10 PN 25 and PN 40《带衬里的法兰钢管和法兰钢管道或法兰铸铁配件 PN 10、PN 25 和 PN 40》.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、 No part of this translation may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Ref. No. DIN 2848 : 2002-06English price group 14 Sales No. 011404

2、.05Continued on pages 2 to 34.ICS 23.040.60Flansch-Rohre aus Stahl und Flansch-Formstcke aus Stahl und Gusseisen mit Auskleidung PN 10, PN 25 und PN 40In keeping with current practice in standards published by the International Organization for Standardization (ISO), a comma has been used throughout

3、 as the decimal marker.2848Lined anged steel pipes and anged steel or cast iron ttings rated for pressures of 10 bar (PN 10), 25 bar (PN 25) and 40 bar (PN 40)Translation by DIN-Sprachendienst.In case of doubt, the German-language original should be consulted as the authoritative text.DEUTSCHE NORM

4、June 2002ContentsPageForeword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Normative references . . . . . . . . . . . . . . .

5、 . . . . . . . . . . . . . . . . . . . . . . . . 23 Concepts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Dimensions and designations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 .1 Flanged elbows . . . . . . . . . . . .

6、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44.2 Flanged tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64.3 Flanged tapers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84.4 Reducers. .

7、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104.5 Spacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184.6 Blank anges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8、. . . . . . . . . 244.7 Flanged pipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264.8 Instrument nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285 Tolerances and limit deviations . . . . . . . . . . . . . . .

9、 . . . . . . . . . . . . . . . . 315.1 Angularity tolerance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315.2 Limit deviations for length l8(pipes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335.3 Limit deviations for lengths l1to l7, l9and l10(anged

10、 ttings). . . . . . . . 335.4 Limit deviations for anges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336 Wall thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336.1 Wall thickness of steel components . . . . . . . . . . . .

11、 . . . . . . . . . . . . . . . . 336.2 Wall thickness of cast iron components . . . . . . . . . . . . . . . . . . . . . . . . . 336.3 Lining thickness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347 Materials . . . . . . . . . . . . . . . . . . . . . . . .

12、. . . . . . . . . . . . . . . . . . . . . . . . . . 348 Designs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349 Technical delivery conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34ForewordThis standard has been p

13、repared by the Normenausschuss Rohrleitungen und Dampfkesselanlagen (Pipe-lines and Boilers Standards Committee).Supersedes December 1993 edition.Page 2DIN 2848 : 2002-06AmendmentsThis standard differs from the December 1993 edition as follows:a) The scope of the standard has been extended to includ

14、e pressure ratings PN 25 and PN 40.b) For PN 10 instrument nozzles, the d4value for a size DN1 of 25 was corrected and branch sizes (DN2) 40 and 50 have been dropped.c) Designations for steel and cast iron have been updated.d) Some new steel grades have been introduced.e) The specications have been

15、harmonized with DIN EN 1092-1.f) The standard has been editorially revised.Previous editionsDIN 2848: 1976-07, 1993-12; DIN 2848-10: 1982-01; DIN 2848-11: 1982- 01; DIN 2848-12: 1982-01.All dimensions are in millimetres.1 ScopeThis standard species dimensions and technical delivery conditions for an

16、ged steel pipes and anged steel or cast iron ttings, with lining, which are intended to be used at pressures of 10 bar (PN 10), 25 bar (PN 25) or 40 bar (PN 40). The components specied in this standard may also be used without lining. The lengths specied include the lining thickness, a (see gure 8).

17、 2 Normative referencesThis standard incorporates, by dated or undated reference, provisions from other publications. These norma-tive references are cited at the appropriate places in the text and the titles of the publications are listed below. For dated references, subsequent amendments to or rev

18、isions of any of these publications apply to this stand-ard only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies.DIN 875 Steel squaresDIN 876-1 Surface plates Natural hard rock surface plates Requirements and testing

19、 DIN 876-2 Surface plates Cast iron surface plates Requirements and testingDIN 1626 and DIN 1629*)DIN 2275 Feeler gaugesDIN 2605-2 Steel butt-welding pipe ttings Elbows and elbows for use at full service pressureDIN 2609 Steel butt-welding pipe ttings Technical delivery conditionsDIN 2642 PN 10 loos

20、e anges with weld-neck and plain collarDIN 2874 Flanged steel pipes and steel and cast iron anged ttings lined with PTFE or PFA Technical delivery conditionsDIN 2875 Flanged steel pipes and anged ttings lined with soft or hard rubber Technical delivery con-ditionsDIN 17457 Welded circular austenitic

21、 stainless steel tubes subject to special requirements Technical delivery conditionsDIN 17458 Seamless circular austenitic stainless steel tubes subject to special requirements Technical delivery conditionsDIN EN 764-3 Pressure equipment Part 3: Denition of parties involved*) Translators note. Stand

22、ards DIN 1626 and DIN 1629 have been superseded by DIN EN 10208-1, DIN EN 10216-1, DIN EN 10217-1, DIN EN 10224, DIN EN 10296-1 and 10297-1.Page 3DIN 2848 : 2002-06DIN EN 1092-1 Flanges and their joints Circular anges for pipes, valves, ttings and accessories Part 1: Steel anges, PN designatedDIN EN

23、 1563 Founding Spheroidal graphite cast iron (includes Amendment A1:2002)DIN EN 10025 Hot rolled unalloyed structural steel products Technical delivery conditions (includes Amendment A1:1993)DIN EN 10208-1 Technical delivery conditions for steel pipes for use with combustible uids Part 1: Pipes of r

24、equirement class ADIN EN 10216-1 Seamless steel tubes for pressure purposes Technical delivery conditions Part 1: Non-al-loy steel tubes with specied room temperature propertiesDIN EN 10217-1 Welded steel tubes for pressure purposes Technical delivery conditions Part 1: Non-alloy steel tubes with sp

25、ecied room temperature propertiesDIN EN 10224 Non-alloy steel tubes for the conveyance of aqueous liquids including water for human con-sumption Technical delivery conditionsDIN EN 10253-2 Butt welding pipe ttings Part 2: Wrought carbon and ferritic alloy steels with specic in-spection requirements*

26、)DIN EN 10296-1 Welded circular steel tubes for mechanical and general engineering purposes Technical delivery conditions Part 1: Non-alloy and alloy steel tubesDIN EN 10297-1 Seamless circular steel tubes for mechanical and general engineering purposes Technical delivery conditions Part 1: Non-allo

27、y and alloy steel tubes3 ConceptsThe concepts dened in DIN EN 764-3 shall apply.4 Dimensions and designationsThe designs shown are for illustrative purposes only; however, the dimensions of pipes and ttings shall be as specied.*) Currently at draft stage.Page 4DIN 2848 : 2002-064 .1 Flanged elbowsTy

28、pe A90 elbow, series 3 as in DIN 2605-2,or as in DIN EN 10253-2Type B90 elbow, series 5 as in DIN 2605-2,or as in DIN EN 10253-2Detail X (scale 2:1)(sectional view)(types C and D, revolved by 45)Mating dimensions for anges as in DIN EN 1092-1, type B facing.Type C45 elbow, series 3 as in DIN 2605-2,

29、 or as in DIN EN 10253-2Type D45 elbow, series 5 as in DIN 2605-2,or as in DIN EN 10253-2For wall and lining thicknesses, see clause 6.Figure 1: 45 and 90 elbowsDesignation of a steel (St) anged elbow, type A, PN 10, DN1100, without lining: Elbow DIN 2848 A 10 100 StDesignation of a steel (St) elbow

30、, type A, PN 10, DN1100, with 4 mm chloroprene rubber (CR) lining:Elbow DIN 2848 A 10 100 St 4 CRPage 5DIN 2848 : 2002-06Table 1: 90 elbowsDN1d11)Type A Type BLength l1Length l2PN 10 PN 25 PN 40 PN 10 PN 25 PN 4020 26,9Not available. Use type B.95 25 33,7 110 11532 42,4 130 13840 48,3 150 15550 60,3

31、 120 125 180 18565 76,1 140 150 220 23080 88,9 165 175 255 265100 114,3 205 220 320 335125 139,7 245 260 385 400150 168,3 285 305 440 465200 219,1 365 380 395 570 590 600250 273,0 450 465 485 710 740 755300 323,9 525 545 570 830 855 890350 355,6 600 635 655 910 950 975400 406,4 680 715 745 1030 1080

32、 1105500 508,0 830 1300 1) The outside diameter, d1, of cast iron components shall be subject to agreement.Table 2: 45 elbowsDN1d11)Type C Type DLength l3Length l4PN 10 PN 25 PN 40 PN 10 PN 25 PN 4020 26,9Not available. Use type D.65 25 33,7 70 7032 42,4 80 8840 48,3 90 9550 60,3 80 85 105 11065 76,

33、1 85 95 120 13080 88,9 100 110 135 145100 114,3 115 130 165 180125 139,7 135 150 190 205150 168,3 150 170 215 240200 219,1 190 213 220 270 290 300250 273,0 225 254 260 335 365 380300 323,9 260 290 305 385 410 445350 355,6 290 325 345 430 470 495400 406,4 325 370 390 480 530 660500 508,0 390 585 For

34、1), see table 1.Page 6DIN 2848 : 2002-064.2 Flanged teesMating dimensions as in DIN EN 1092-1, type B facing.For wall and lining thicknesses, see clause 6.Figure 2: All-anged teeDesignation of an all-anged steel (St) tee (T), PN 10, DN1100, without lining: Tee DIN 2848 T 10 100 100 StDesignation of

35、an all-anged steel (St) tee, PN 10, DN1100, reducing on branch DN250, with 4 mm chloroprene rubber (CR) lining:Tee DIN 2848 T 10 100 50 St 4 CRTable 3: Flanged teesDN1d11) DN2d2Lengthsl1l2PN 10 PN 25 PN 40 PN 10 PN 25 PN 4020 26,9 20 26,9 95 95 25 33,725 33,7110 115110 11520 26,9 95 10032 42,432 42,

36、4130 135130 13825 33,7 110 11520 26,9 100 10040 48,340 48,3150 155150 15532 42,4 130 13825 33,7 110 11520 26,9 100 10050 60,350 60,3120 125120 12540 48,3 150 15532 42,4 130 13825 33,7 110 11565 76,165 76,1140 150140 15050 60,3 120 12540 48,3 150 15532 42,4 130 138(continued)Page 7DIN 2848 : 2002-06D

37、N1d11) DN2d2Lengthsl1l2PN 10 PN 25 PN 40 PN 10 PN 25 PN 4080 88,980 88,9165 175165 17565 76,1 140 15050 60,3 120 12540 48,3 150 155100 114,3100 114,3205 220205 22080 88,9 165 17565 76,1 140 15050 60,3 120 125125 139,7125 139,7245 260245 260100 114,3 205 22080 88,9 165 17565 76,1 140 150150 168,3150

38、168,3285 305285 305125 139,7 245 260100 114,3 205 22080 88,9 165 175200 219,1200 219,1365 380 395365 385 395150 168,3 285 305 305125 139,7 245 265 260100 114,3 205 220 220250 273,0250 273,0450 465 485450 470 485200 219,1 365 385 395150 168,3 285 305 305125 139,7 245 265 260300 323,9300 323,9525 545

39、570525 550 570250 273,0 450 470 485200 219,1 365 385 395150 168,3 285 305 305350 355,6350 355,6600 635 655600 635 655300 323,9 525 550 570250 273,0 450 470 485200 219,1 365 385 395400 405,4400 406,4680 715 745680 720 745350 355,6 600 635 655300 323,9 525 550 570250 273,0 450 470 485500 508,0500 508,

40、0830 830 400 406,4 680350 355,6 600300 323,9 525For 1), see table 1.Table 3 (concluded)Page 8DIN 2848 : 2002-064.3 Flanged tapersType K (concentric) Type E (eccentric)Mating dimensions as in DIN EN 1092-1, type B facing.For wall and lining thicknesses, see clause 6. Figure 3: Flanged tapersDesignati

41、on of a anged steel (St) concentric taper (K), PN 10, DN1100 and DN280, without lining:Taper DIN 2848 K 10 100 80 StDesignation of a anged steel (St) concentric taper (E), PN 10, DN1100 and DN280, with 4 mm CR soft rubber lining:Taper DIN 2848 K 10 100 80 St 4 CRTable 4: Flanged tapersDN1d11) DN2d2e

42、Length l5PN 10 PN 25 PN 4025 33,7 20 26,9 3 125 12532 42,425 33,7 4130 13020 26,9 840 48,332 42,4 3 150 15025 33,7 7145 14520 26,9 1150 60,340 48,3 6165 17032 42,4 925 33,7 160 16565 76,150 60,3 8 185 19540 48,3 14180 19032 42,4 80 88,965 76,1 6190 20050 60,3 1440 48,3 20 185 195(continued)Page 9DIN

43、 2848 : 2002-06DN1d11) DN2d2eLength l5PN 10 PN 25 PN 40100 114,380 88,9 13 205 22565 76,1 19200 22050 60,3 27125 139,7100 114,3 1323526080 88,9 25 25565 76,1 32 230 250150 168,3125 139,7 14250285100 114,3 2728080 88,9 40200 219,1150 168,3 25270310 315125 139,7 40 305310100 114,3 52 300250 273,0200 2

44、19,1 27 310 345 370150 168,3 52305340 360125 139,7 67 335 355300 323,9250 273,0 25 340 380 420200 219,1 52 335 375 405150 168,3 78 330 370 400350 355,6300 323,9 16465520 570250 273,0 42510560200 219,1 68 545400 406,4350 355,6 25495565 615300 323,6 41 555 605250 273,0 67 550 595500 508,0400 406,4 516

45、50 350 355,6 76300 323,9 92For 1), see table 1.Table 4 (concluded)Page 10DIN 2848 : 2002-064.4 ReducersMating dimensions and hole patterns shall conform to DIN EN 1092-1.For lining thicknesses, see clause 6. 4.4.1 Concentric reducersType K1 Type K2 Type K3Flanges with threaded blind holes (DN2) and

46、unthreaded clearance holes (DN1)Flanges with threaded blind holes (DN2) and clearance holes (DN1)Flanges with blind holes on one of principal axes of ange1) Transition from DN1to DN2(cylindrical or conical) at manufacturers discretion.2) d6equal to size of DN2, in mm. Other dimensions as shown on th

47、e left.Figure 4: Concentric reducersDesignation of a anged steel (St) concentric reducer of type K1, PN 10, DN1100 and DN250, with 3 mm poly-tetrauoroethylene (PTFE) lining:Reducer DIN 2848 K1 10 100 50 St 3 PTFE4.4.2 Eccentric reducersType E2 Type E3Hole pattern as for type K2. Hole pattern as for

48、type K3.Figure 5: Eccentric reducersDesignation of a anged steel (St) eccentric reducer of type E2, PN 10, DN1100 and DN250, with 3 mm poly-tetrauoroethylene (PTFE) lining:Reducer DIN 2848 E2 10 100 50 St 3 PTFEPage 11DIN 2848 : 2002-06Table 5: PN 10 concentric reducersDN1DN2Type D dxk1Boltsdyk2Bolt

49、sNumberThread size (d3)Hole diam-eter d4NumberThread size (d5)l60325 20 K3 115 68 854M1258 754M12353220 K3140 78 100M1658 7525 K3 68 854020 K2150 88 11058 7525 K3 68 8532 K3 78 100 M165020 K2165 102 12558 75M1225 K2 68 8532 K3 78 100M1640 K3 88 1106520 K2185 122 14558 75M1225 K2 68 8532 K2 78 100M1640 K3 88 11050 K3 102 1258025 K1200 138 1608 18 68 85 M1232 K2M16