CAN CSA-CEI IEC 61000-4-14-2001 Electromagnetic Compatibility (EMC) - Part 4-14 Testing and Measurement Techniques - Voltage Fluctuation Immunity Test (First Edition).pdf

《CAN CSA-CEI IEC 61000-4-14-2001 Electromagnetic Compatibility (EMC) - Part 4-14 Testing and Measurement Techniques - Voltage Fluctuation Immunity Test (First Edition).pdf》由会员分享，可在线阅读，更多相关《CAN CSA-CEI IEC 61000-4-14-2001 Electromagnetic Compatibility (EMC) - Part 4-14 Testing and Measurement Techniques - Voltage Fluctuation Immunity Test (First Edition).pdf（35页珍藏版）》请在麦多课文档分享上搜索。

1、,. / -,i._ National Standard of Canada I y a ATT, j (” ,“,*- ,; ,E z 1 CAN/CSA-CEI/IEC61000-4-14-01 CSA INTERNATIONAL (CEI/IEC 61000-4-14:1999) - - Norme nationale du Canada International Standard CEI/IEC 610004-141999 (first edition, 1999-02) has been adopted without modification as CSA Standard CA

2、N/CSA-CEI/IEC 610004-14-01, which has been approved as a National Standard of Canada by the Standards Council of Canada. ISBN 1-55324-467-2 March 2001 La norme intemationale CEI/IEC 610004-14:1999 (premi cet aspect demeure la responsabilit de lorganisme rdacteur de normes accrdit. II est recommand a

3、ux personnes qui ont besoin de normes de se servir des Normes nationales du Canada lorsque la chose est possible. Ces normes font lobjet dexamens priodiques ; cest pourquoi il est recommand aux utilisateurs de se procurer ldition la plus rcente de la norme auprs de lorganisme qui la prpare. La respo

4、nsabilit dapprouver les Normes nationales du Canada incombe au Conseil canadien des normes 270, rue Albert, Bureau 200 Ottawa (Ontario) Kl P 6N7 Canada _ CSA INTERNATIONAL / . National Standards of Canada are published in English and French. Bien que le but premier vis par cette norme soit nonc sous

5、 sa rubrique Domaine dapplication, il est important de retenir quil incombe lutilisateur de juger si la norme convient ses besoins particuliers. mMarque dpose de YAssociation canadienne de normalisafion The Canadian Standards Association, which operates under the name CSA International (GA), under w

6、hose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards development and certification activiti

7、es. CSA standards reflect a national consensus of producers and users - including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and federal gove

8、rnments in their regulations, particularly in the fields of health, safety, building and construction, and the environment. Individuals, companies, and associations across Canada indicate their support for CSAs standards development by volunteering their time and skills to CSA Committee work and sup

9、porting the Associations objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSAs total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSAs standards develo

10、pment activities. The Association offers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, the Association regularly and continually audits and inspects products that bear the CSA Mark.

11、In addition to its head office and laboratory complex in Toronto, CSA has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, the Association has developed the necessary expertise to meet its corporate mission: CSA is an independ

12、ent service organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs. For further information on CSA services, write to

13、 CSA International 178 Rexdale Boulevard Toronto, Ontario, M9W 1 R3 Canada CSA INTERNAilONAL / - The Standards Council of Canada is the coordinating body of the National Standards system, a federation of independent, autonomous organizations working towards the further development and improvement of

14、 voluntary standardization in the national interest. The principal objects of the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety, and welfare of the public, assisting and protecting the consumer, facilitating do

15、mestic and international trade, and furthering international cooperation in the field of standards. A National Standard of Canada is a standard which has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views of a number of capable individuals

16、whose collective interests provide to the greatest practicable extent a balance of representation of producers, users, consumers, and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard which is capable of making a significant and timely contributi

17、on to the national interest. Approval of a standard as a National Standard of Canada indicates that a standard conforms to the criteria and procedures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard; this remains the continuing respons

18、ibility of the accredited standards-development organization. Those who have a need to apply standards are encouraged to use National Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the latest edition from the organiz

19、ation preparing the standard. The responsibility for approving National Standards of Canada rests with the Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario, Kl P 6N7 Canada Les normes nationales du Canada sont publiees en versions francaise et anglaise. Although the intended

20、primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users to judge its suitability for their particular purpose. Registered trade-mark of Canadian Standards Association CAN/CSA-CEI/IEC 6 I OOO-4- 14-O 7 Compatibilit lectromag

21、ntique (CEM) - Partie 4- 7 4: Techniques dessai et de mesure - Essai dimmunit aux fluctuations de tension CAN/CSA-CEI-IEC 61000-4-l 4-01 CompatibiZit Zectromagntique WMI - Partie 4-14: Techniques dessai et de mesure -Essai dimmunit aux fluctuations de tension Prface CSA Ce document constitue la prem

22、ire dition de la norme CAN/CSA-CEI/IEC 61000-4-l 4, Compatibilit lectromagntique (CEM) - Partie 4- 7 4 : Techniques dessai et de mesure - Essai dimmunit aux fluctuations de tension. II sagit de ladoption, sans modifications, de la norme CEI/IEC (Commission lectrotechnique Internationale) 61000-4-l 4

23、:1999 (premire dition, 1999-02), qui porte le mme titre. Cette norme fait partie de la srie de normes CEI 61000 adopte par la CSA qui traite de la compatibilit lectromagntique. Les normes CSA sont labores grce au temps consacr par les membres des comits et lapport financier provenant de la vente des

24、 normes, et aussi grce des contributions volontaires. Cette norme a t rvise en vue de son adoption pour le Canada par le Sous-comit technique CSA sur la CEM basse frquence sous lautorit du Comit technique sur la compatibilit lectromagntique des appareils base tension et du Comit directeur stratgique

25、 sur le gnie en matire dnergie et la compatibilit lectromagntique, et a t approuve par le Comit technique. On peut obtenir la liste des membres du Comit technique sur demande. Cette norme a t approuve comme norme nationale du Canada par le Conseil canadien des normes. Mars 200 7 0 CSA International

26、- 200 7 Tous droits rservs. Aucune partie de cette publication ne peut tre reproduite par quelque moyen que ce soit sans la permission pralable de lditeur. 1 impression du document CE/ a t autorise. Lorsque le texte dit “cette norme internationale“, le lecteur doit comprendre “cette Norme nationale

27、du Canada”. Toute demande de renseignements sur cette Norme nationale du Canada devrait tre adresse CSA International, 7 78, boul. Rexdale, Toronto (Ontario) Canada, M9W 7 R3. C.A/4 Mars 200 1 Electromagnetic compatibility (EMC) -Part 4- 7 4: Testing CANKSA-CEI/IEC 6 I OOO-4- 14-O 1 and measurement

28、techniques -Voltage fluctuation immunity test CAN/CSA-CEI/IEC 61000-4-l 4-01 Electromaetic compatibility (En-w) - Part 4-14: Testing and measurement techniques - VoZtage fluctuation immunity test CSA Preface This is the first edition of CSA Standard CANKSA-CEI/IEC 61000-4-l 4, Electromagnetic compat

29、ibility (EMC) - Part 4- 7 4: Testing and measurement techniques - Voltage fluctuation immunity test, which is an adoption without modification of the identically titled CEI/IEC (International Electrotechnical Commission) Standard 61000-4-l 4:1999 (first edition, 1999-02). It forms part of the IEC 61

30、000 Series of Standards adopted by CSA covering electromagnetic compatibility. CSA Standards are developed through the dedication of time by committee members and by financial support through sales of Standards and through voluntary contributions. This Standard was reviewed for Canadian adoption by

31、the CSA Technical Subcommittee on Low Frequency EMC under the jurisdiction of the Technical Committee on Electromagnetic Compatibility of Low Voltage Equipment and the Strategic Steering Committee on Power Engineering and Electromagnetic Compatibility, and has been formally approved by the Technical

32、 Committee. A list of the members of the Technical Committee is available upon request, This Standard has been approved as a National Standard of Canada by the Standards Council of Canada. March 200 7 0 CSA Internarional - 200 7 All rights reserved. No part of this publication may be reproduced in a

33、ny form whatsoever without the prior permission of the publisher. /EC material is reprinted with permission. Where the words “this International Standard” appear in the text, they should be interpreted as “this National Standard of Canada”. Inquiries regarding this National Standard of Canada should

34、 be addressed to CSA Inremational, 178 Rexdale Boulevard, Toronto, Ontario, M9W 7 R3. March 200 7 CsA/s NORME CEI INTERNATIONALE IEC INTERNATIONAL 6100014114 STANDARD Premiere kdition First edition 1999-02 PUBLICATION FO,NDAMENTALE EN CEM BASIC EMC PUBLICATION CompatibiIit6 6lectromagrGtique (CEM) -

35、 Partie 4-14: Techniques dessai et de mesure - Essai dimmunit6 aux fluctuations de tension Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test 0 IEC 1999 Droits de reproduction reservks - Copyright - all rights reserved Aucune parti

36、e de cane publication ne peut (ttre reproduite ni No part of this publication may be reproduced or utilized in utili any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with

37、the IEC also participate in this preparation. The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of the IEC on technical matters express,

38、 as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees. 3) The documents produced have the form of recommendations for international use and are published in the form of standard

39、s, technical reports or guides and they are accepted by the National Committees in that sense. 4) In order to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regional standard

40、s. Any divergence between the IEC Standard and the corresponding national or regional standard shall be clearly indicated in the latter. 5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with one of its

41、 standards. 6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61000-4-14 has been prepared by subcommit

42、tee 77A: Low fre- quency phenomena, of IEC technical committee 77: Electromagnetic compatibility. This standard forms part 4-14 of IEC 61000 series. It has the status of basic EMC publication in accordance with IEC Guide 107. The text of this standard is based on the following documents: I FDIS I Re

43、port on voting I 77A1263lFDIS 77A1268lRVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. Annex A is for information only. -6- INTRODUCTION 61000-4-14 0 CEI:1999 La CEI 61000 est publie sous la forme de plusieurs par

44、ties spares conformment la structure suivante: Partie 1: Gnralits Considrations gnrales (introduction, principes fondamentaux) Dfinitions, terminologie Partie 2: Environnement Description de lenvironnement Classification de lenvironnement Niveaux de compatibilit Partie 3: Limites Limites dmission Li

45、mites dimmunit (dans la mesure ou ces limites ne relvent pas des comits de produits) Partie 4: Techniques dessai et de mesure Techniques de mesure Techniques dessai Partie 5: Guides dinstallation et dattnuation Guides dinstallation Mthodes et dispositifs dattnuation Partie 6: Normes gnriques Partie

46、9: Divers Chaque partie est son tour subdivise en plusieurs parties publies soit comme Normes internationales, soit comme rapports techniques dont certaines ont dj t publies en tant que sections. Dautres seront publies avec le numro de la partie suivi dun tiret et dun second chiffre identifiant la s

47、ubdivision (exemple 61000-6-I). 61000-4-14 0 IEC:1999 -7- INTRODUCTION IEC 61000 is published in separate parts according to the following structure: Part 1: General General considerations (introduction, fundamental principles) Definitions, terminology Part 2: Environment Description of the environm

48、ent Classification of the environment Compatibility levels Part 3: Limits Emission limits Immunity limits (insofar as these limits do not fall under the responsibility of the product committees) Part 4: Testing and measurement techniques Measurement techniques Testing techniques Part 5: Installation

49、 and mitigation guidelines Installation guidelines Mitigation methods and devices Part 6: Generic standards Part 9: Miscellaneous Each part is further subdivided into several parts, published either as International Standards, or as technical reports, some of which have already been published as sections. Others will be published with the part number followed by a dash and a second number identifying the subdivisi