BS ISO 9903-2-2003 Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Foot with interchaining《纺织机械和附件 梳理机的金属针布用异型钢丝的主要尺寸 链与链间的底边》.pdf

《BS ISO 9903-2-2003 Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Foot with interchaining《纺织机械和附件 梳理机的金属针布用异型钢丝的主要尺寸 链与链间的底边》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 9903-2-2003 Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Foot with interchaining《纺织机械和附件 梳理机的金属针布用异型钢丝的主要尺寸 链与链间的底边》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 9903-2:2003 Textile machinery and accessories Main dimensions for section wires for metallic card clothing Part 2: Foot with interchaining ICS 59.120.10 BS ISO 9903-2:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee o

2、n 21 March 2003 BSI 21 March 2003 ISBN 0 580 41442 6 National foreword This British Standard reproduces verbatim ISO 9903-2:2003 and implements it as the UK national standard. This standard, together with BS ISO 9903-1:2003, supersedes BS ISO 9903:1991 which is withdrawn. The UK participation in its

3、 preparation was entrusted to Technical Committee TCI/33, Textile machinery, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred

4、to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions

5、 of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or p

6、roposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 3 and a back c

7、over. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Reference number ISO 9903-2:2003(E)INTERNATIONAL STANDARD ISO 9903-2 First edition 2003-02-15 Textile machinery and accessories Main dimensi

8、ons for section wires for metallic card clothing Part 2: Foot with interchaining Matriel pour lindustrie textile Dimensions principales des fils pour garnitures de carde Partie 2: Profil enchan talon autobloquant BSISO99032:2003BSISO99032:2003iiIS-3099 O2:(3002E) I SO 3002 All irhgts seredevr iiiFor

9、eword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a tech

10、nical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

11、 electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated t

12、o the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for

13、 identifying any or all such patent rights. ISO 9903-2 was prepared by Technical Committee ISO/TC 72, Textile machinery and machinery for dry- cleaning and industrial laundering, Subcommittee SC 1, Spinning preparatory, spinning, twisting and winding machinery and accessories. This first edition, to

14、gether with the first edition of ISO 9903-1, cancels and replaces ISO 9903:1991, which has been technically revised. ISO 9903 consists of the following parts, under the general title Textile machinery and accessories Main dimensions for section wires for metallic card clothing: Part 1: Foot without

15、interlocking or interchaining Part 2: Foot with interchaining BSISO99032:2003iiiINTENRATIONAL TSANDADR IS-3099 O2:(3002E)I SO 3002 All irhgts seredevr 1Textile machinery and accessories Main dimensions for section wires for metallic card clothing Part 2: Foot with interchaining 1 Scope This part of

16、ISO 9903 specifies the main dimensions for section wires for metallic card clothing with interchaining foot. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references,

17、 the latest edition of the referenced document (including any amendments) applies. ISO 5234, Textile machinery and accessories Metallic card clothing Terms and definitions 3 Terms, definitions and symbols For the purposes of this document, the terms and definitions and the symbols given in ISO 5234

18、apply. 4 Dimensions Dimensions shall be in accordance with Figure 1 and Tables 1 and 2. Figure 1 Section wire Type C BSISO99032:20031IS-3099 O2:(3002E) 2 I SO 3002 All irhgts seredevrTable 1 Main dimensions with section wire Type C Dimensions in millimetres b 6h 1h 20 0,1 0,05 0,1 0,2 + 1,0 1,3 1,6

19、1,8 2,1 5 2,5 3,2 6 4,2 7,5 2,2 Table 2 Main dimensions with smaller section wire Type CV Dimensions in millimetres b 6h 1h 20 0,1 0,05 0 0,2 0,9 4 1,0 1,3 1,6 1,8 2,1 4,5 2,5 3,2 5,5 1,6 BSISO99032:20032IS-3099 O2:(3002E) I SO 3002 All irhgts seredevr 35 Designation The designation of a section wir

20、e with interchaining, Type C, shall include the following information in the order given: a) “Section wire”; b) reference to this part of ISO 9903 (i.e. ISO 9903-2); c) the type of section wire (Type C or CV); d) the dimension b 6 , in millimetres; e) the dimension h 1 , in millimetres. EXAMPLE 1 A

21、section wire, Type C, of pitch width of rib b 6= 2,5 mm and total height of wire h 1= 6 mm is designated as follows: Section wire ISO 9903-2 C 2,5 6 EXAMPLE 2 A section wire, with smaller cross-section, Type CV, of pitch width of rib b 6= 1,6 mm and total height of wire h 1= 4,5 mm is designated as

22、follows: Section wire ISO 9903-2 CV 1,6 4,5 BSISO99032:20033BS ISO 9903-2:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the intern

23、ational level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We

24、 would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an

25、 individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 899

26、6 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on stan

27、dards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Informatio

28、n Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. T

29、el: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists

30、 in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any me

31、ans electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.