BS ISO 19467-2017 Thermal performance of windows and doors Determination of solar heat gain coefficient using solar simulator《门窗的热性能 用太阳模拟器测定太阳能的热系数》.pdf

《BS ISO 19467-2017 Thermal performance of windows and doors Determination of solar heat gain coefficient using solar simulator《门窗的热性能 用太阳模拟器测定太阳能的热系数》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 19467-2017 Thermal performance of windows and doors Determination of solar heat gain coefficient using solar simulator《门窗的热性能 用太阳模拟器测定太阳能的热系数》.pdf（64页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Thermal performance of windows and doors Determination of solar heat gain coefficient using solar simulatorBS ISO 19467:2017 ISO 2017Thermal performance of windows and doors Determination of solar heat gain coefficient

2、using solar simulatorPerformance thermique des fentres et portes Dtermination du coefficient de gain thermique solaire au moyen dun simulateur solaireINTERNATIONAL STANDARDISO19467First edition2017-04Reference numberISO 19467:2017(E)National forewordThis British Standard is the UK implementation of

3、ISO 19467:2017.The UK participation in its preparation was entrusted to Technical Committee B/540/8, Mirror committee for ISO/TC 163 - Thermal Performance and Energy use in the built Environment.A list of organizations represented on this committee can be obtained on request to its secretary.This pu

4、blication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 85203 9ICS 91.120.10; 91.060.50Compliance with a British Standard cannot c

5、onfer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS ISO 19467:2017 ISO 2017Thermal performance of windows and do

6、ors Determination of solar heat gain coefficient using solar simulatorPerformance thermique des fentres et portes Dtermination du coefficient de gain thermique solaire au moyen dun simulateur solaireINTERNATIONAL STANDARDISO19467First edition2017-04Reference numberISO 19467:2017(E)BS ISO 19467:2017I

7、SO 19467:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocop

8、ying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01

9、 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 19467:2017ISO 19467:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Symbols and subscripts . 25 Principle 35.1 General . 35.2 Measurement of heat flow rates with irradiance 35.3 Determination of

10、the net density of heat flow rate due to thermal transmission 55.4 Measurement of heat flow rates without irradiance 66 Test apparatus and specimens . 86.1 Construction and summary of the test apparatus 86.1.1 Construction of the test apparatus . 86.1.2 Summary of the test apparatus . 96.2 Solar sim

11、ulator 96.3 Climatic chamber . 106.4 Metering box 106.5 Surround panels 116.6 Calibration panels 116.7 Metering location of temperatures and irradiance.116.8 Test specimens . 127 Measurement procedure .127.1 Measurement . 127.2 Expression of results for reference conditions 138 Test report 138.1 Rep

12、ort contents . 138.2 Estimation of uncertainty . 14Annex A (normative) Determination of surface coefficient of heat transfer .15Annex B (normative) Determination of night time U-value in case of small temperature difference 17Annex C (normative) Correction of measured solar heat gain coefficient to

13、reference conditions 18Annex D (informative) Examples of design of measuring apparatus 30Annex E (informative) Example of temperature measurement 39Annex F (informative) Measuring method and example of measurement of active solar fenestration systems .42Annex G (informative) Example of measurement a

14、nd uncertainty analysis44Annex H (informative) Spectral weighting procedures based on ISO 9050 and with analogous solar simulator spectra .47Bibliography .52 ISO 2017 All rights reserved iiiContents PageBS ISO 19467:2017ISO 19467:2017(E)ForewordISO (the International Organization for Standardization

15、) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be repr

16、esented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to deve

17、lop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO

18、/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified durin

19、g the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the vo

20、luntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .

21、html.This document was prepared by Technical Committee ISO/TC 163, Thermal performance and energy use in the built environment, Subcommittee SC 1, Test and measurement methods.iv ISO 2017 All rights reservedBS ISO 19467:2017ISO 19467:2017(E)IntroductionThe terms solar heat gain coefficient (SHGC), t

22、otal solar energy transmittance (TSET), solar factor and g-value are all used to describe the same quantity. Small differences might be caused by different reference conditions (e.g. differences in the reference solar spectrum). In this document, solar heat gain coefficient is used.This document is

23、designed to provide solar heat gain coefficient values by standardized measurement method and to enable a fair comparison of different products. It specifies standardized apparatus and criteria. The solar heat gain coefficient measuring apparatus applied in this document includes solar simulator, cl

24、imatic chamber, and metering box. Solar heat gain coefficient values of windows and doors with or without shading devices shall be determined more precisely by means of combination between calculation and measurement.This document does not deal with the centre of glazing solar heat gain coefficient

25、measurement. However, the centre of glazing solar heat gain coefficient can be measured by either this method or cooled plate method (see Reference 12). ISO 2017 All rights reserved vBS ISO 19467:2017BS ISO 19467:2017Thermal performance of windows and doors Determination of solar heat gain coefficie

26、nt using solar simulator1 ScopeThis document specifies a method to measure the solar heat gain coefficient of complete windows and doors.This document applies to windows and doorsa) with various types of glazing (glass or plastic; single or multiple glazing; with or without low emissivity coatings,

27、and with spaces filled with air or other gases),b) with opaque panels,c) with various types of frames (wood, plastic, metallic with and without thermal barrier or any combination of materials),d) with various types of shading devices (blind, screen, film or any attachment with shading effects),e) wi

28、th various types of active solar fenestration systems building-integrated PV systems (BIPV) or building-integrated solar thermal collectors (BIST).This document does not include the following:a) shading effects of building elements (e.g. eaves, sleeve wall, etc.);b) heat transfer caused by air leaka

29、ge between indoors and outdoors;c) ventilation of air spaces in double and coupled windows;d) thermal bridge effects at the rebate or joint between the window or door frame and the rest of the building envelope.This document does not apply to the following:a) non-vertical windows;b) curtain walls;c)

30、 industrial, commercial and garage doors.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest editi

31、on of the referenced document (including any amendments) applies.ISO 9050, Glass in building Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factorsISO 9845-1, Solar energy Reference solar spectral irra

32、diance at the ground at different receiving conditions Part 1: Direct normal and hemispherical solar irradiance for air mass 1,5ISO 12567-1, Thermal performance of windows and doors Determination of thermal transmittance by the hot-box method Part 1: Complete windows and doorsINTERNATIONAL STANDARD

33、ISO 19467:2017(E) ISO 2017 All rights reserved 1BS ISO 19467:2017ISO 19467:2017(E)ISO 15099:2003, Thermal performance of windows, doors and shading devices Detailed calculationsISO 52022-31), Energy performance of buildings Thermal, solar and daylight properties of building components and elements P

34、art 3: Detailed calculation method of the solar and daylight characteristics for solar protection devices combined with glazingIEC 60904-9, Photovoltaic devices Part 9: Solar simulator performance requirements3 Terms and definitionsFor the purposes of this document, the terms and definitions given i

35、n ISO 7345, ISO 8990, ISO 9288, ISO 9845-1, ISO 12567-1, ISO 15099 and IEC 60904-9 apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at h t t p :/ www .electropedia .org/ ISO Online browsing platform: available at h

36、 t t p :/ www .iso .org/ obp4 Symbols and subscriptsSymbol Quantity UnitA Area m2gSolar heat gain coefficient (also known as total solar energy transmittance, solar factor or g-value)h Surface coefficient of heat transfer W/(m2K)H Height mIIrradiance, density of heat flow rate of incident radiation

37、(energy per unit area per unit time resulting from incident radiation)W/m2qDensity of heat flow rate (energy per unit area per unit time resulting from radiative and/or convective and/or conduc-tive heat transfer)W/m2U Thermal transmittance W/(m2K)W Width m Celsius temperature CHeat flow rate (energ

38、y per unit time resulting from radia-tive and/or convective and/or conductive heat transfer)WSubscripts SignificanceBPlanes of peripheral wall of the me-tering boxC Cooling deviceex ExternalF Internal fang GlazingH Heating devicein Internalm MeasuredN Without irradiancene Environmental external1) To

39、 be published.2 ISO 2017 All rights reservedBS ISO 19467:2017ISO 19467:2017(E)Subscripts Significanceni Environmental internalP Surround panelr ReflectionSolar Incident radiationsp Test specimenst Standardized5 Principle5.1 GeneralThe solar heat gain coefficient can be determined according to the sa

40、me principle equations that are described as in ISO 15099:2003, Formula (14) and ISO 52022-3. Therefore, the determination of the solar heat gain coefficient of windows and doors involves two stages. The first stage is to measure the density of heat flow rate through the test specimen with irradianc

41、e (solar heat gain + thermal transmission). The second stage is to measure the density of heat flow rate through the test specimen without irradiance (thermal transmission).The net density of heat flow rate of incident radiation is determined by the radiometer in front of the test specimen during th

42、e first stage.The net density of heat flow rate of the solar heat gain is determined as the difference between the net density of heat flow rate measured in the first stage and the net density of heat flow rate due to thermal transmission, which is evaluated using the thermal transmittance measured

43、in the second stage.Since the measured solar heat gain coefficient, gm, of windows and doors is the ratio of the net density of heat flow rate of the solar heat gain to the net density of heat flow rate of incident radiation, it shall be calculated using Formula (1) with or without shading devices:g

44、qqqqmin in SolarSolar=()0(1)whereqSolaris the net density of heat flow rate of incident radiation, in W/m2;qinis the net density of heat flow rate through the test specimen with irradiance, i n W/m2;qin(qSolar= 0) is the net density of heat flow rate through the test specimen due to thermal transmis

45、sion without irradiance when the temperature difference between inter-nal side and external side is (ne ni), in W/m2.All of the effects such as changes in the surface coefficient of heat transfer caused by the irradiance shall be included in the solar heat gain coefficient.5.2 Measurement of heat fl

46、ow rates with irradianceThe heat flow rates with irradiance are shown in Figure 1. ISO 2017 All rights reserved 3BS ISO 19467:2017ISO 19467:2017(E)Key1 external side baffle (optional) Bheat flow rate through the planes of peripheral wall of the metering box with irradiance2 internal side baffle (opt

47、ional) Cheat flow rate removed by the cooling device with irradiance3 heat flow measuring device Fheat flow rate supplied by the one or more internal fans with irradiance (optional)4 cooling device Hheat flow rate supplied by the heating device with irradiance (optional)5 heating device (optional) i

48、nnet heat flow rate through the test specimen with irradiance6 one or more internal fans (optional)in(qSolar= 0) net heat flow rate through the test specimen due to thermal transmission without irradiance when the temperature difference between internal side and external side is (ne ni)7 test specim

49、en Pheat flow rate through the surround panel with irradianceSolarnet heat flow rate of incident radiationNOTE This figure shows the case of a condition when the environmental external temperature is higher than the environmental internal temperature. In the case of a reverse condition, the directions of the heat flow through the test specimen and the surround panel due to thermal transmission will be reversed.Figure 1 Heat flow rates with irradianceThe net density of heat flow rate of the i