BS ISO 18435-3-2015 Industrial automation systems and integration Diagnostics capability assessment and maintenance applications integration Applications integration description me.pdf

《BS ISO 18435-3-2015 Industrial automation systems and integration Diagnostics capability assessment and maintenance applications integration Applications integration description me.pdf》由会员分享，可在线阅读，更多相关《BS ISO 18435-3-2015 Industrial automation systems and integration Diagnostics capability assessment and maintenance applications integration Applications integration description me.pdf（50页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS ISO 18435-3:2015Industrial automation systemsand integration Diagnostics,capability assessment andmaintenance applicationsintegrationPart 3: Applications integration descriptionmethodBS ISO 18435-3:2015 BRITISH STANDARDNational forewordThis British Standard is the UK impl

2、ementation of ISO 18435-3:2015.The UK participation in its preparation was entrusted to TechnicalCommittee AMT/5, Industrial architectures and integrationframeworks.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to i

3、nclude all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 80096 2ICS 25.040.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This Br

4、itish Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2015.Amendments issued since publicationDate Text affectedBS ISO 18435-3:2015 ISO 2015Industrial automation systems and integration Diagnostics, capability assessment and maintenance applicati

5、ons integration Part 3: Applications integration description methodSystmes dautomatisation industrielle et intgration Diagnostics, valuation des moyens et intgration des applications de maintenance Partie 3: Mthode de description pour lintgration dapplicationsINTERNATIONAL STANDARDISO18435-3First ed

6、ition2015-08-01Reference numberISO 18435-3:2015(E)BS ISO 18435-3:2015ISO 18435-3:2015(E)ii ISO 2015 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2015, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise i

7、n any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de B

8、landonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 18435-3:2015ISO 18435-3:2015(E)Foreword ivIntroduction v1 Scope . 12 Normative reference(s) . 13 Terms and definitions . 14 Abbreviated terms 25 Applications integration d

9、escription methods . 25.1 Introduction to the application integration concept 25.1.1 General 25.1.2 Inter-domain requirements . 45.1.3 Intra-domain requirements . 55.2 Profiling concept . 65.2.1 General 65.2.2 Intra-domain information exchange compatibility 65.2.3 Inter-domain information exchange c

10、ompatibility 75.3 Basic interoperability requirements for information exchange . 85.4 Procedure for the construction of AIMEs and ADMEs 85.4.1 General 85.4.2 Application interoperability requirements 105.4.3 Specify content section 115.4.4 Specify resource and conveyance requirements .115.5 AIME req

11、uirements 115.5.1 General. 115.5.2 AIME detailed requirements 115.6 Construction of the ADME 125.6.1 General. 125.6.2 Technical dictionary selection . 125.6.3 Application framework selection . 125.6.4 Contents section 126 Compliance 12Annex A (normative) Ontology in AIME/ADME 13Annex B (informative)

12、 Smart Pump Information exchange example 20Annex C (informative) Jam detection example 28Annex D (informative) EtherNet/IP to OPC Information Exchange .33Bibliography .38 ISO 2015 All rights reserved iiiContents PageBS ISO 18435-3:2015ISO 18435-3:2015(E)ForewordISO (the International Organization fo

13、r Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the

14、 right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The proced

15、ures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial

16、 rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights id

17、entified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanatio

18、n on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document i

19、s Technical Committee ISO/TC 184, Industrial automation systems and integration, Subcommittee SC 5, Architecture, communication and integration frameworks.ISO 18435 consists of the following parts, under the general title Industrial automation systems and integration Diagnostics, capability assessme

20、nt, and maintenance applications integration: Part 1: Overview and general requirements Part 2: Descriptions and definitions of application domain matrix elements Part 3: Applications integration description methodiv ISO 2015 All rights reservedBS ISO 18435-3:2015ISO 18435-3:2015(E)IntroductionISO 1

21、8435 defines a set of integration methods intended to be used when integrating diagnostics, capability assessment, and maintenance applications with the applications in production, control, and other manufacturing operations.ISO 18435-1 provides an overview of the elements as shown in Figure 1 and t

22、he rules of a method to describe an automation applications integration requirements. The elements include the key aspects when integrating an automation application with other applications and the relationships of these key aspects. The rules include the information exchanges to support interoperab

23、ility within an application and between applications.ISO 18435-2 provides the detailed definitions of the Application Interaction Matrix Element (AIME) and Application Domain Matrix Element (ADME) structures and their relationships. In particular, the steps for constructing an ADME from a set of AIM

24、Es are described.This part of ISO 18435 defines a recommended method based on templates to describe the interoperability between applications in two or more automation domains within an enterprise, at all levels of an enterprises functional and resource hierarchies. The focus is on the production op

25、erations and maintenance operations domains.Figure 1 Relationships between the parts of ISO 18435UML is used to represent information exchange requirements associated with the interoperability and the integration of plant floor applications, in particular, diagnostics, control, maintenance and produ

26、ction.The purpose is to focus on how to express the information exchanges: about the process, equipment, operators, and materials and other automation assets; that are conveyed from control and production systems to various diagnostics and maintenance systems in order to perform asset management.The

27、 intended benefits for representing information exchanges are to: facilitate specifying and procuring open systems that support interoperability among diagnostics and maintenance applications; ISO 2015 All rights reserved vBS ISO 18435-3:2015ISO 18435-3:2015(E) reduce the time to develop diagnostics

28、 and maintenance solutions that directly address the well-defined integration requirements; provide a means to categorize tools intended to enable and verify interoperability and integration across applications.vi ISO 2015 All rights reservedBS ISO 18435-3:2015INTERNATIONAL STANDARD ISO 18435-3:2015

29、(E)Industrial automation systems and integration Diagnostics, capability assessment and maintenance applications integration Part 3: Applications integration description method1 ScopeThis part of ISO 18435 defines the profiling methodology to use the interoperability templates of ISO 18435-2. These

30、profiling methods describe the construction and the use of application domain matrix elements (ADMEs), application interaction matrix elements (AIMEs), and an open technical dictionary (OTD) to support the information exchange.In particular, this part of ISO 18435 gives guidance related to profiling

31、 the information exchange between two applications by establishing the context, conveyance, and contents defined in ISO 18435-2.This part of ISO 18435 is intended to be used in conjunction with ISO 18435-1 and ISO 18435-2.2 Normative reference(s)The following documents, in whole or in part, are norm

32、atively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 8000 (all parts), Data qualityISO/IEC 10646, Information t

33、echnology Universal Coded Character Set (UCS)ISO 15745-1, Industrial automation systems and integration Open systems application integration framework Part 1: Generic reference descriptionISO 18435-1:2009, Industrial automation systems and integration Diagnostics, capability assessment and maintenan

34、ce applications integration Part 1: Overview and general requirementsISO 18435-2:2012, Industrial automation systems and integration Diagnostics, capability assessment and maintenance applications integration Part 2: Descriptions and definitions of application domain matrix elementsISO/TS 29002 (all

35、 parts), Industrial automation systems and integration Exchange of characteristic dataISO/TS 29002-5:2009, Industrial automation systems and integration Exchange of characteristic data Part 5: Identification scheme3 Terms and definitionsFor the purposes of this document, the terms and definitions gi

36、ven in ISO 18435-1 and ISO 18435-2 and the following apply. ISO 2015 All rights reserved 1BS ISO 18435-3:2015ISO 18435-3:2015(E)3.1ontologyexplicit and consensual specification of concepts of an application domain independent of any use of these conceptsSOURCE: ISO 13584-511:2006, 3.1.204 Abbreviate

37、d termsADME Application Domain Matrix ElementAIME Application Integration Matrix ElementCBM Condition-Based MaintenanceOTD Open Technical DictionaryUML Unified Modelling LanguageXML eXtensible Markup Language5 Applications integration description methods5.1 Introduction to the application integratio

38、n concept5.1.1 GeneralThe customer applications integration requirements determine the information exchange profiles that are needed to support the application interoperability requirements. To develop the information exchange profiles for the applications of interest, it is necessary to determine t

39、he existing customer domain areas of interest.Clause 5 describes the method for specifying the information contained in the AIME and the ADME for the information exchange requirements using templates defined in ISO 18435-2. The use of this method will provide interoperability for the applications in

40、 the defined context. As this methodology is used for integrating additional applications from various domains, this method can be used for verifying if the information exchange profiles (using the AIME structure) are interoperable as needed by the user. Figure 2 shows an iterative process to verify

41、 the intended interoperability of the application integration.2 ISO 2015 All rights reservedBS ISO 18435-3:2015ISO 18435-3:2015(E)Figure 2 System design cycle for interoperabilityThe general structure for the application information exchange profiles are depicted in Figure 3. The methods for assessi

42、ng the AIME profile compatibility to support the information exchanges will depend upon the context and domains of interest.Figure 3 Profile elementsThe diagnostic and maintenance mission depends on the objectives of integration between different application domains as shown in Figure 4. The descrip

43、tion of this technical mission shall include the identification of the associated assets for which the mission is defined and the application domains involved.The method for describing the information exchange profiles is dependent upon the context established according to intra- or inter-domain inf

44、ormation exchanges. The capability profiles of the resources to support the information exchange shall be described by the AIME.NOTE The information exchanges between the allocated resource and definition resources can be described with a sequence diagram according to ISO 18435-2:2012, 5.2.Applicati

45、on domain categories are defined in ISO 18435-1 as shown in Figure 4. In this part of ISO 18435, interoperability templates are described for integration requirements as depicted in ISO 18435-1 for the interoperability of applications. ISO 2015 All rights reserved 3BS ISO 18435-3:2015ISO 18435-3:201

46、5(E)As an illustration of the methodology using interoperability templates, the diagnostic and control application domains are used as shown in Figure 4.Figure 4 Categories of application domains5.1.2 Inter-domain requirementsInteroperability templates for inter-domain application interoperability s

47、hall require references to either a specific domain standard or the profile of a specific domain standard, according to ISO 15745, to specify the context of the integration model.EXAMPLE 1 As shown in Figure 5, the application in the control application domain could use the IEC 61512 reference model

48、 to describe the model construction, terms, and definition used in the interoperability templates for the ADME. The application in the diagnostic application domain could use the ISO 13374-2 reference model to describe the corresponding diagnostic ADME.Thus, when exchanging information between diffe

49、rent domains, it is necessary to indicate the context and then to describe the content information handled by the conveyance mechanism. The context, conveyance and content information are contained in the ADME using profile specifications. The actual contents of the information exchange shall be defined by profile specifications.EXAMPLE 2 An ISO 13374 diagnostic information message, advisory generation, is sent from the diagnostic application as an event to the IEC 61512 batch control application