BS EN ISO 21079-2-2008 Chemical analysis of nrefractories containing nalumina zirconia and nsilica — Refractories ncontaining 5 percent nto 45 percent of ZrO2 n(alternative to the .pdf

《BS EN ISO 21079-2-2008 Chemical analysis of nrefractories containing nalumina zirconia and nsilica — Refractories ncontaining 5 percent nto 45 percent of ZrO2 n(alternative to the .pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 21079-2-2008 Chemical analysis of nrefractories containing nalumina zirconia and nsilica — Refractories ncontaining 5 percent nto 45 percent of ZrO2 n(alternative to the .pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN ISO21079-2:2008ICS 81.080NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDChemical analysis ofrefractories containingalumina, zirconia, andsilica Refractoriescontaining 5 percentto 45 percent of ZrO2(alternative to theX-ray fluorescencemethod)Part 2: Wet ch

2、emical analysis (ISO21079-2:2008)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/08/2009 02:04, Uncontrolled Copy, (c) BSIThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 30 April2009 BSI 2009ISBN 978 0 580 58571 5Amendments/corrigenda i

3、ssued since publicationDate CommentsBS EN ISO 21079-2:2008National forewordThis British Standard is the UK implementation of EN ISO21079-2:2008.The UK participation in its preparation was entrusted to TechnicalCommittee RPI/1, Refractory products and materials.A list of organizations represented on

4、this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin,

5、 ISO/EXCHANGE CHINA STANDARDS, 10/08/2009 02:04, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 21079-2April 2008ICS 81.080; 71.040.40English VersionChemical analysis of refractories containing alumina, zirconia,and silica - Refractories containing 5 percent to 45 pe

6、rcent ofZrO2 (alternative to the X-ray fluorescence method) - Part 2:Wet chemical analysis (ISO 21079-2:2008)Analyse chimique des matriaux rfractaires contenant delalumine, de la zircone et de la silice - Matriauxrfractaires contenant de 5 % 45 % de ZrO2 (mthodealternative la mthode par fluorescence

7、 de rayons X) -Partie 2: Mthodes danalyse chimique par voie humide(ISO 21079-2:2008)Chemische Analyse von aluminiumoxid-, zirkoniumoxid-und silicium(IV)-oxidhaltigen feuerfesten Erzeugnissen -Feuerfeste Erzeugnisse mit einem Massenanteil an ZrO2von 5 % bis 45 % (Alternative zumRntgenfluoreszenzverfa

8、hren) - Teil 2: NasschemischeAnalyse (ISO 21079-2:2008)This European Standard was approved by CEN on 12 April 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any a

9、lteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by tr

10、anslationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany

11、, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagem

12、ent Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 21079-2:2008: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/08/2009 02:04, Uncontrolled Copy, (c) BSIBS EN ISO 2107

13、9-2:2008EN ISO 21079-2:2008 (E) 3 Foreword This document (EN ISO 21079-2:2008) has been prepared by Technical Committee ISO/TC 33 “Refractories“ in collaboration with Technical Committee CEN/TC 187 “Refractory products and materials” the secretariat of which is held by BSI. This European Standard sh

14、all be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2008, and conflicting national standards shall be withdrawn at the latest by October 2008. Attention is drawn to the possibility that some of the elements of this do

15、cument may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard

16、: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. End

17、orsement notice The text of ISO 21079-2:2008 has been approved by CEN as a EN ISO 21079-2:2008 without any modification. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/08/2009 02:04, Uncontrolled Copy, (c) BSIBS EN ISO 21079-2:2008ISO 21079-2:2008(E) ISO 2008 All rights reserved iiiConten

18、ts Page Foreword iv 1 Scope . 1 2 Normative references . 1 3 Determination of silicon(IV) oxide. 2 4 Determination of aluminium oxide 4 5 Determination of iron(III) oxide 7 6 Determination of titanium(IV) oxide 8 7 Determination of calcium oxide 11 8 Determination of magnesium oxide 12 9 Determinati

19、on of sodium oxide by flame photometry 13 10 Determination of potassium oxide by flame photometry . 14 11 Determination of chromium(III) oxide using diphenylcarbazide 15 12 Determination of zirconium oxide (including hafnium oxide) by mandelic acid (-hydroxybenzeneacetic acid) gravimetric method. 16

20、 13 Calculation and expression of test results 17 14 Test report . 17 Bibliography . 18 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/08/2009 02:04, Uncontrolled Copy, (c) BSIBS EN ISO 21079-2:2008ISO 21079-2:2008(E) iv ISO 2008 All rights reservedForeword ISO (the International Organiza

21、tion for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established

22、has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take Part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. In

23、ternational Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publi

24、cation as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent r

25、ights. ISO 21079-2 was prepared by Technical Committee ISO/TC 33, Refractories. ISO 21079 consists of the following parts, under the general title Chemical analysis of refractories containing alumina, zirconia, and silica Refractories containing 5 % to 45 % of ZrO2(alternative to the X-ray fluoresce

26、nce method): Part 1: Apparatus, reagents and dissolution Part 2: Wet chemical analysis Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma emission spectrometry (ICP-AES) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/08/2009 02:04, Uncontrolled Copy, (

27、c) BSIBS EN ISO 21079-2:2008INTERNATIONAL STANDARD ISO 21079-2:2008(E) ISO 2008 All rights reserved 1Chemical analysis of refractories containing alumina, zirconia, and silica Refractories containing 5 % to 45 % of ZrO2(alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis 1 Sc

28、ope This part of ISO 21079 specifies methods for the chemical analysis of AZS (alumina, zirconia, and silica) refractory products (containing 5 % to 45 % of ZrO2) and raw materials, using traditional (“wet”) methods. This part of ISO 21079 is not applicable to MgO-based refractories. This part of IS

29、O 21079 gives alternatives to the X-ray fluorescence (XRF) method given in ISO 12677. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of

30、the referenced document (including any amendments) applies. ISO 10058-2:1), Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis ISO 21079-1:2008, Chemical analysis of refractories containing alumina, zirconia an

31、d silica Refractories containing 5 % to 45 % of ZrO2(alternative to the X-ray fluorescence method) Part 1: Apparatus, reagents and dissolution ISO 21079-3:2008, Chemical analysis of refractories containing alumina, zirconia and silica Refractories containing 5 % to 45 % of ZrO2(alternative to the X-

32、ray fluorescence method) Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma emission spectrometry (ICP-AES) ISO 21587-2:2007, Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis ISO

33、 26845:2008, Chemical analysis of refractories General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods 1) To be published. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/08/2009 02:0

34、4, Uncontrolled Copy, (c) BSIBS EN ISO 21079-2:2008ISO 21079-2:2008(E) 2 ISO 2008 All rights reserved3 Determination of silicon(IV) oxide 3.1 General The determination of silicon(IV) oxide is carried out using one of the following methods. a) Combined use of the dehydration or the coagulation and mo

35、lybdenum blue methods. This method is applied to samples consisting of more than 4 % by mass of silicon(IV) oxide. b) Molybdenum blue method. This method is applied to samples consisting of less than 8 % by mass of silicon(IV) oxide. 3.2 Combined use of dehydration or coagulation and molybdenum blue

36、 methods 3.2.1 Principle An aliquot portion of stock solution (S1) or (S1) is treated with ammonium molybdate and the silicomolybdate is reduced to yield molybdenum blue, the absorbance of which is measured. The sum of this residual silicon(IV) oxide in solution plus the mass of silicon(IV) oxide (m

37、1 m2) derived in accordance with 9.2.2.3 or 9.2.3.3 of ISO 21079-1:2008 gives the total silicon(IV) oxide content. 3.2.2 Procedure This determination should be commenced with little delay after the stock solution (S1) or (S1) is prepared, as prolonged standing could allow polymerization of silica to

38、 occur leading to low results. Transfer a 10,0 ml aliquot portion of stock solution (S1) or (S1) (see Annex A of ISO 21079-1:2008) to a 100 ml plastic beaker, add 2 ml of hydrofluoric acid (1+9), mix with a plastic rod and allow to stand for 10 min. Add 50 ml of boric acid solution, 2 ml of ammonium

39、 molybdate solution while swirling at a temperature of about 25 C, and allow to stand for 10 min. Add 5 ml of L (+)-tartaric acid solution while swirling and after 1 min add 2 ml of L (+)-ascorbic acid solution while shaking. Transfer a solution to a 100 ml plastics volumetric flask, dilute to the m

40、ark with water and allow to stand for 60 min. Measure the absorbance of the solution in a 10 mm cell at a wavelength of 650 nm using water as reference. 3.2.3 Plotting the calibration graph Transfer 0 ml, 2 ml, 4 ml, 6 ml, 8 ml and 10 ml aliquot portions of diluted silicon(IV) oxide solution (0 mg t

41、o 0,4 mg as silicon(IV) oxide) into six 100 ml plastic beakers and, to each, add 10 ml of blank solution (B1) or (B1) (see Annex A of ISO 21079-1:2008). Treat these solutions and measure the absorbance as described in 3.2.2, and plot the absorbances against the amounts of silicon(IV) oxide. Prepare

42、the calibration graph by adjusting the curve so that it passes through the point of origin. 3.2.4 Calculation Calculate the mass fraction of silicon(IV) oxide, w(SiO2), expressed as a percentage, using Equation (1) with the absorbances obtained in 3.2.2 and the calibration graph. ()()()12 sb250010Si

43、O 100mm mmwm+= (1) where m1is the mass from 9.2.2.3 or 9.2.3.3 of ISO 21079-1:2008, in grams; Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/08/2009 02:04, Uncontrolled Copy, (c) BSIBS EN ISO 21079-2:2008ISO 21079-2:2008(E) ISO 2008 All rights reserved 3m2is the mass from the blank prepar

44、ed in accordance with 9.2.2.4 or 9.2.3.4 of ISO 21079-1:2008, in grams; msis the mass of silicon(IV) oxide in the aliquot portion of stock solution (S1) or (S1), in grams; mbis the mass of silicon(IV) oxide in the aliquot portion of blank solution (B1) or (B1), in grams; m is the mass of the test po

45、rtion prepared in accordance with ISO 21079-1:2008, in grams. 3.3 Molybdenum blue method 3.3.1 Principle An aliquot portion of the stock solution (S1) is treated with ammonium molybdate and the silicomolybdate is reduced to yield molybdenum blue, the absorbance of which is measured. 3.3.2 Procedure

46、Transfer the specified volume of stock solution (S1) (see Annex A of ISO 21079-1:2008) to two plastic beakers and add, to each, the specified volume of blank solution (B1) (see Annex A of ISO 21079-1:2008). Add 2 ml of hydrofluoric acid (1+9), mix with a plastic rod and allow to stand for 10 min. Th

47、en add 50 ml of boric acid solution and dilute to about 80 ml with water. Add 5 ml of ammonium molybdate solution while mixing at a temperature of 20 C to 30 C and allow to stand for 10 min. Add 20 ml of tartaric acid solution while stirring. After 1 min, add 10 ml of L (+)-ascorbic acid solution wh

48、ile stirring. Transfer each solution to two 200 ml plastics volumetric flasks, dilute to the mark with water and mix. Allow to stand for 60 min and measure the absorbance of the solutions in a 10 mm cell at a wavelength of 650 nm against water. Take the mean value of the two measurements for the cal

49、culation of silica content. The volume of the aliquot portions from stock solution (S1) and the blank solution are given in Table 1 depending on the mass fraction of silicon(IV) oxide. Table 1 Aliquot volume of stock solution (S1) and blank solution (B1) Mass fraction of SiO2Volume of stock solution (S1) Volume of blank solution (B1)% ml ml 1 25 5.2.2 Dilute to about 60 ml with water, add 5 ml of L (+)-tartaric acid solution and 2 ml of L (+)-ascorbic acid while mixing. Add 10 ml of 1,10-p